> Well, hrm, I don't really know then. It's quite a strange error. Are
> you sure it depends on which build you use?
>
> --
> Pelle
>
Yes, it depends on the build I use. But with all the daily builds of
debian installer I recently used, this problem didn't come up again.
So I think this bug can be
On Tue, Jun 15, 2004 at 23:08 +0200, Thorsten Schaefer wrote:
> Seems I said to early that it is working fine now. With the daily
> build from June 14th that I downloaded and tested today, the issue is
> there again (for the REM56G-100). I checked syslog and the same
> messages as reported earlier
>> Oh? So you didn't have the DHCP problem when you used tc1?
> No, it worked just fine now.
Seems I said to early that it is working fine now. With the daily
build from June 14th that I downloaded and tested today, the issue is
there again (for the REM56G-100). I checked syslog and the same
mes
On Mon, Jun 14, 2004 at 23:57 +0200, Thorsten Schaefer wrote:
> No some are but several are not solved. Dennis updated this bug report
> on May 28th, 2004 01:18:44 mentioning that they are fixed in SVN/CVS
> but did not yet get into d-i.
> And this seems still to be the case.
> Here are more detai
> Oh? So you didn't have the DHCP problem when you used tc1?
No, it worked just fine now.
> > 1. When I select german during the installation process and reboot
during
> > the base-config and then complete the configuration after the
machine is up
> > again, the rest of the base-config runs in en
On Sat, Jun 12, 2004 at 22:21 +0200, Thorsten Schaefer wrote:
> In the meantime I've downloaded the daily installer beta from June
> 1st and the testcandidate 1 and with that the network card works fine during
> the complete
> installation phase.
Oh? So you didn't have the DHCP problem when you us
I've done some further testing according to your suggestions and it was
successful. With the images I tested when I sent my last update (latest
version was from May 26th 2004) even an ifup/ifdown didn't solve the issue
with the Xircom REM56G-100 and an /etc/init.d/pcmcia restart also didn't
solve i
On Thu, Jun 03, 2004 at 19:18 -0400, Nicholas Breen wrote:
> I've got an RBEM56G-100, which I assume is similar. I've discovered
> that it doesn't work if the "xircom_tulip_cb" module is loaded, but does
> work if only the "xircom_cb" module is loaded.
He did say earlier that he had a 16-bit (non
On Thu, Jun 03, 2004 at 11:52:58PM +0200, Thorsten Schaefer wrote:
> I've done about six further installations. Everytime the Xircom PCMCIA
> network card (REM56G-100) is used, the network card worked during the
> initial installation process, didn't work after the first reboot (so during
> the ins
On Thu, Jun 03, 2004 at 23:52 +0200, Thorsten Schaefer wrote:
> I've done about six further installations. Everytime the Xircom PCMCIA
> network card (REM56G-100) is used, the network card worked during the
> initial installation process, didn't work after the first reboot (so during
> the installa
I've done about six further installations. Everytime the Xircom PCMCIA
network card (REM56G-100) is used, the network card worked during the
initial installation process, didn't work after the first reboot (so during
the installation part that follows) and after all following reboots works.
To veri
On Wed, Jun 02, 2004 at 23:39 +0200, Thorsten Schaefer wrote:
> I did not install any additional packages/tasks after the first boot. The
> network card worked fine on all following boots.
Hrm, strange. Maybe base-config did something.
> I'll do another installation in a few days in a dhcp enviro
> Okay, all this looks correct. The strange thing (which I first missed)
> is that it didn't work the first time you booted but it did the second
> time. What did you do after the first boot? Did you install any
> tasks/packages from CD? Has the network card worked on all following
> boots?
>
I di
On Fri, May 28, 2004 at 19:26 +0200, Thorsten Schaefer wrote:
> The kernel version is: 2.4.26-1-386.
>
> Below is the content of /etc/network/interfaces:
[...]
> The Xircom Card I use is a REM56G-100 (10/100 Ethernet + Modem). According
> to the driver (xirc2ps_cs) it is a 16-bit card.
Okay, all
Hello Pelle,
> Which kernel version did you install? What does
> /etc/network/interfaces look like? Do you have a Cardbus or 16-bit
> card?
The kernel version is: 2.4.26-1-386.
Below is the content of /etc/network/interfaces:
# This file describes the network interfaces available on your syste
heya,
On Thu, May 27, 2004 at 09:54:19PM +0200, Thorsten Schaefer wrote:
> - All languages starting with a capital letter: not corrected, all languages
> but Dvorak are starting with small letters
this is fixed in SVN/CVS, but it did not yet get into d-i
> - Replacment of the word "Empfange" wi
Hi,
> My PCMCIA network card worked during the network configuration but not after
> the first start of the new installed system, so during the initial
> configuration. An /etc/init.d/network restart (or stop or start) didn't
> work. The computer was the whole time connected to the same network th
Hello,
I downloaded a fresh version of the netinst CD-Image for the i386
architecture (dated May 26th 23:22) and performed a fresh installation after
wiping the hard disk and installing a fresh Windows system.
Installation process:
- Spelling of the german words "Wählen" and "für": correct
- Spel
Hello Martin,
I'll download an image tomorrow and will do some installs to check if the
issues are resolved.
The report should be ready by friday morning.
Kind regards
Thorsten Schaefer
- Original Message -
From: "Martin Michlmayr" <[EMAIL PROTECTED]>
To: "Thorsten Schaefer" <[EMAIL PR
Hi Thorsten,
do you have time to get an image from
http://gluck.debian.org/cdimage/testing/sarge_d-i/
and report how well that works and whether the issues you reported in
your install report have been dealt with.
--
Martin Michlmayr
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTEC
On Thu, May 20, 2004 at 08:06:53AM +0200, Christian Perrier wrote:
> > that's right. one time with a colon (":") and one time without. Can you
> > please file a bug against shadow?
>
> NO, DO NOT.
>
> This has just been fixed and was already reported anyway.
wooops, ok. The only source I could c
Quoting Dennis Stampfer ([EMAIL PROTECTED]):
> > In the English version of the password setup for the user I also found a
> > duplicate sentence: "Enter the full name of the new user".
>
> that's right. one time with a colon (":") and one time without. Can you
> please file a bug against shadow?
Thorsten,
On Fri, May 14, 2004 at 11:20:42AM +0200, "Thorsten Schäfer" wrote:
> During the configuration of the timezone in the German version of the
> installer the sentence that states the current time of the hardware clock is
> twice in the screen.
Has been fixed already, as joeyh said.
> An
"Thorsten Schäfer" wrote:
> During the configuration of the timezone in the German version of the
> installer the sentence that states the current time of the hardware clock is
> twice in the screen.
I think that this was fixed in base-config 2.22; I saw it with 2.21 but the
current German text do
Hello
> Thanks for your time. One last thing about translations: Did you have
> any (translation-related) problems while partitioning?
I did not have translation-related problems while partitioning, but I must
admit that I did not go too much into detail. I just created a root
partition and a swa
hey!
On Wed, May 12, 2004 at 03:50:54PM +0200, Thorsten Schaefer wrote:
> After choosing de_DE as language in the beginning of the installation
> process the language is switched to German. The next screen, the keyboard
> language
> (keymap) contains several small misspellings (let me know if this
* Thorsten Schaefer <[EMAIL PROTECTED]> [2004-05-12 15:50]:
> After choosing de_DE as language in the beginning of the installation
[...]
Dennis, can you look at the issues with the German translation raised
in this report?
> Ok now back to the technical description. The PCMCIA card
> recognitati
Package: installation-reports
Debian-installer-version: beta 4 - downloaded 7.5.2004
http://www.debian.org/devel/debian-installer
Date: 10.5.2004 8:00 pm CET
Method: CD-Image (110 MB, i386 version)
Machine: Compaq Armada 3500
Processor:Pentium II - 366 MHz
cat /proc/cpuinfo shows
processor : 0
28 matches
Mail list logo
