not appear anymore with this package:
ii libvte-2.91-0:amd64 0.75.92-1amd64Terminal emulator widget for
GTK+ 3.0 - runtime files
So the bug can be closed.
Thanks!
Detlev
Package: gnome-terminal
Version: 3.51.90-1
Severity: normal
Occasionally I run ffmpeg to transcode videos and this can take up to an hour.
With the latest gnome-terminal, this long-running process gets stopped when the
terminal is not visible. This can be because the frame shows another tab or
Package: pulseaudio-utils
Version: 16.1+dfsg1-2+b1
Severity: important
Hi, the /usr/bin/padsp script does not correctly set LD_PRELOAD because the
script looks broken. Lines 76-80:
if [ x"$LD_PRELOAD" = x ] ; then
LD_PRELOAD="/usr/\\$$LIB/pulseaudio/libpulsedsp.so"
else
Package: khal
Version: 1:0.10.4~ds-4
Followup-For: Bug #1007255
So I finally also ran into this problem. Upstream has a lot of issues around
the timezone warnings, but I especially looked at this one:
https://github.com/pimutils/khal/issues/1092
So it seems upstream has fixed the problem and
as is.
This is of course only a stop gap solution but until newer ocrmypdf versions
arise it may help people looking for a way to quickly make ocrmypdf work again.
Best wishes
Detlev
-- System Information:
Debian Release: bookworm/sid
APT prefers testing-debug
APT policy: (500, 'testing-debug'), (500
No, I am out of here
If the bug is not reproducible for you by now, it is not worth
to persue it
You might want to close this issue
Thanks anyway for your assistance
and I do not agree that this is a sole kernel problem
fstrim --verbose
should report something, anything
I checked the SSDs with:
hdparm -I /dev/sda | grep -i TRIM
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIM
<<< full reproduction scenario >>>
The two computers, where it does not work, are
- an Intel NUC nuc7pjyhn, first produced in 2021Q2
- an Intel NUC nuc6cayh, first produced in 2016Q4
Both operating systems were procuced with the current Debian Installer,
which is based on Debian 11.2 Bullseye
Yes, sorry for having caused this inconvenience
I repeat and extend the OP:
1st error:
fstrim --verbose --all
reports nothing, but should due to --verbose
2nd error:
fstrim --verbose /
gives a wrong error message "fstrim: /: the discard operation is not
supported"
This happens on Debian
After numerous installation attempts with a lot of trial and error, I
got it bootable, but unfortunately cannot say, what in particular let
the error message disappear
I read in the Debian Wiki
(https://wiki.debian.org/UEFI#RAID_for_the_EFI_System_Partition):
"But for software RAID systems there is currently no support for
putting the ESP on two separate disks in RAID."
I interpret that as "it cannot work", so, the Debian Installer should
refuse to install
me. Relevant info from the log is
attached as plain file.
Best wishes
Detlev
Nov 24 23:27:49 krikkit gnome-shell[8849]: [VERTICAL-OVERVIEW] resetting
overrides
Nov 24 23:27:49 krikkit gnome-shell[8849]: [VERTICAL-OVERVIEW] disabled
Nov 24 23:27:50 krikkit gnome-shell[8849]: ../../../gobj
Hi Simon,
thanks for the quick reply!
> On Wed, 24 Nov 2021 at 10:50:29 +0100, Detlev Zundel wrote:
>> Having installed the "vertical overview" package, I experience segfaults in
>> gnome-shell killing the whole session. I do think the addon is related as
&
Package: gnome-shell
Version: 41.1-1
Severity: important
Having installed the "vertical overview" package, I experience segfaults in
gnome-shell killing the whole session. I do think the addon is related as log
messages precede the segfaults. Here are three logs for such incidents:
Nov 17
wishes
Detlev
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American
tion
in this case, but systemd is sometimes not so easy...
Thanks in advance
Detlev
-- System Information:
Debian Release: 11.0
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-3-amd64 (SMP w/8
Hi Dima,
> Hi. Yeah, wayland is almost certainly the cuplrit. If you can talk to
> the gnuplot upstream to get it resolved, that'd be awesome.
Ok, I'll see what I can do.
And thanks for the awesome tool and the outstanding support!
Cheers
Detlev
--
Warning: this comic occasionally co
to GNOME on Xorg and sure enough
everything works as expected...
So the bug only shows in gnuplot under GNOME on Wayland. It is
therefore likely a gnuplot bug instead of a problem in feedgnuplot.
Does this make sense? Should I open a bug with gnuplot?
Thanks!
Detlev
--
The 82558 B-step
. Only one update after approximately 8 seconds then again
fixed.
>> Maybe this is related to the gnuplot version in Bullseye?
>
> Maybe, but I doubt it. Please run the two experiments above, and we can
> go from there.
I should have mentioned I only recently switched from GNOME o
and when I manually run gnuplot and paste the fragments into it, it
works just fine. It seems to be related with the fact that gnuplot reads the
input from the pipe.
Maybe this is related to the gnuplot version in Bullseye?
Thanks in advance
Detlev
-- System Information:
Debian Release: bullseye
ing.
Thanks in advance
Detlev
--
Quantum physicists can either know how fast they do it, or where they
do it, but not both.
Package: gimp
Version: 2.10.8-2
Severity: normal
Tags: upstream
```
GNU Image Manipulation Program version 2.10.8
git-describe: GIMP_2_10_6-294-ga967e8d2c2
C compiler:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/8/lto-wrapper
0.15.1b-8+deb9u1),
openjdk-8-jre-headless:amd64 (8u162-b12-1~deb9u1, 8u171-b11-1~deb9u1), libsdl-
image1.2:amd64 (1.2.12-5+b8, 1.2.12-5+deb9u1), tzdata:amd64 (2018d-0+deb9u1,
2018e-0+deb9u1)
End-Date: 2018-05-07 14:30:23
Cheers
Detlev
-- System Information:
Debian Release: 9.4
APT pref
the libservlet3.1-java should suggest libservlet3.1-java-doc
but not vice versa.
Kind regards
Detlev
-- System Information:
Debian Release: buster/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.11.0-1-amd64 (SMP w/6 CPU
| php5-cgi
+ libapache2-mod-php5 | php5-cgi | php5-fpm
Kind regards
Detlev
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.2.0-1-amd64 (SMP w/6 CPU cores)
Locale
,
+ kio-audiocd, mplayer, mppenc, speex, timidity,
vorbis-tools, vorbisgain, wavpack
Description: audio converter frontend for KDE
soundKonverter is a frontend to various audio converters.
Kind regards
Detlev
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500
-7.1 release.
I don't had any build problems.
Kind regards
Detlev
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.19.0-trunk-amd64 (SMP w/6 CPU cores)
Locale: LANG=de_DE.UTF-8
))
bd_syslibs += libpng12-dev, libjpeg62-dev,
else ifneq (,$(filter $(distrel),wheezy precise quantal raring saucy))
bd_syslibs += libpng-dev, libjpeg8-dev,
else
bd_syslibs += libpng-dev, libjpeg-dev,
endif
Kind regards,
Detlev
-- System Information:
Debian Release: jessie/sid
APT prefers
Package: r-base
Version: 3.1.2-1
Severity: wishlist
Hello Maintainer,
Please build the r-base source-package against the default tcl/tk version (8.6)
Kind regards,
Detlev Brodowski
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable
Package: calligra
Version: 1:2.7.5-1
Severity: wishlist
Dear maintainers,
it would be fine if you package the new available stable version for Debian.
(2.8.3)
Thanks in advance
Detlev
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable
.
But for all ruby packages which contains the bad mkmf.log file.
Kind Regards
Detlev
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Detlev Zundel d...@akk.org writes:
Package: icedove
Version: 10.0.12-1
Severity: important
Icedove fails to start up at all after a system upgrade to Jessie:
[dzu@deepthought ~][0]$ icedove
(process:28515): GLib-CRITICAL **: g_slice_set_config: assertion
sys_page_size == 0' failed
[dzu
Package: icedove
Version: 10.0.12-1
Severity: important
Icedove fails to start up at all after a system upgrade to Jessie:
[dzu@deepthought ~][0]$ icedove
(process:28515): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size
== 0' failed
[dzu@deepthought ~][0]$
Doing a websearch it
Hi Maintainer,
I have seen that there is a new release 0.05 which is now an official
release.
http://search.cpan.org/~lzap/UUID-0.05/
Kind regards,
Detlev
NewCoTec GmbH, Technologiepark 1, D-91522 Ansbach, Deutschland, Amtsgericht
Ansbach, HRB 4298, USt-ID: DE243245746, Geschäftsführer
to work in
the first place.
I would really appreciate if we can fix things up. Let me know if I
can test something.
Thanks
Detlev
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux
Hello Ansgar,
On 03/25/2013 11:19, Detlev Zundel wrote:
I started debugging at and it turns out that 'at' cannot even read
/etc/at.deny and thus concludes that no user except root should be
allowed to use it (seen easily also in strace):
bash[2]$ strace -e open atq
[...]
open(/etc
Hi Steve,
On Mon, Mar 25, 2013 at 11:19:16AM +0100, Detlev Zundel wrote:
I started debugging at and it turns out that 'at' cannot even read
/etc/at.deny and thus concludes that no user except root should be
allowed to use it (seen easily also in strace):
bash[2]$ strace -e open atq
Hi
/.
It was my own script to remove the beep on the console.
It contains only this one line:
/usr/bin/setterm -blength 0
Kind regards,
Detlev
NewCoTec GmbH, Technologiepark 1, D-91522 Ansbach, Deutschland, Amtsgericht
Ansbach, HRB 4298, USt-ID: DE243245746, Geschäftsführer: Werner Fuchs
Diese E-Mail
their recommended package ttf-liberation.
Kind regards,
Detlev
-- Package-specific info:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name
at this timestamp.
So I cannot build the package libwine-gecko-1.4.
Kind regards,
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.6-trunk-amd64 (SMP w/4 CPU cores
Am Samstag, 1. Dezember 2012, 16:00:24 schrieb Daniel Kahn Gillmor:
Hi Detlev--
On 12/01/2012 08:58 AM, Detlev Brodowski wrote:
Package: ttf-liberation
Version: 1.07.2-6
Severity: normal
Hello maintainer,
Please make the package multiarch ready. I think you need only to
add
Hello Maintainer,
the source package name should also be renamed to libgit-pureperl-perl.
Kind regards,
Detlev
NewCoTec GmbH, Technologiepark 1, D-91522 Ansbach, Deutschland, Amtsgericht
Ansbach, HRB 4298, USt-ID: DE243245746, Geschäftsführer: Werner Fuchs
Diese E-Mail und alle Anhänge
Package: libgit-pure-perl
Version: 0.48-2
Severity: normal
Dear maintainer,
I'm not really shure, but I think that the perl packages have the following
naming convention
liboriginal name-perl
and the name of this module in CPAN is Git::PurePerl.
Kind regards,
Detlev
-- System Information
Package: kmymoney
Version: 4.6.2-3.1
Severity: normal
Dear maintainers,
Please adjust the package recommendation from the not existing package
gpg-agent to the existing package gnupg-agent.
Kind regards
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT
a number of jobs
- dbcheck rw_writelock problem
- Windows VSS restore bug
Kind regards
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU
while processing:
/var/cache/apt/archives/libqtwebkit4_2.2.1-4+b1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
=
Kind regards,
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64
Package: libuuid-perl
Version: 0.02-4+b2
Severity: wishlist
Hello Maintainer,
please package the upstream version 0.04 of the uuid perl module.
http://search.cpan.org/~jnh/UUID/UUID.pm
Cause: The vSphere SDK for Perl needs this version as minimum version.
Kind regards,
Detlev
-- System
Am Wednesday, 23. May 2012, 19:13:42 schrieb Peter Eisentraut:
On ons, 2012-05-23 at 07:56 +0200, Detlev Brodowski wrote:
Package: dirmngr
Version: 1.1.0-3
Severity: important
Hello maintainer,
The init script starts the daemon but don't write the pid to the
pid file. Therefore
/etc/init.d/dirmngr: Zeile 36: $'\E[11':
Kommando nicht gefunden.
/etc/init.d/dirmngr: Zeile 36: 0]DIRMNGR_INFO=/var/run/dirmngr/socket:27054:1:
Datei oder Verzeichnis nicht gefunden
.. ok
Kind regards,
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy
Package: gnuplot
Version: 4.6.0-1
Followup-For: Bug #665832
Hi,
as an additional data point, I see exactly the same behaviour.
Cheers
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'testing
source worked as expected.
To solve this bugreport I would suggest add a conflict to autoconf2.13
to the build-depends part of the control file.
Kind regards,
Detlev
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Package: unixodbc
Version: 2.2.14p2-3
Severity: important
The bug 604387 still exist.
Please update the packages from the source package unixodbc to the new
upstream release 2.3.0 too.
Kind regards,
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy
to release
1.1.8.
Kind regards,
Detlev
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh
Package: idle3
Version: 3.2-3
Severity: minor
Tags: sid
As this package is a meta package it should contain the dependency to idl-
python3.2.
Please lock at the package idle. That package contains the dependency to idle-
python2.6
Kind regards,
Detlev
-- System Information:
Debian Release
Am Dienstag, 16. August 2011, 08:18:28 schrieb Josua Dietze:
Am 16.08.2011 08:01, schrieb Detlev Brodowski:
The package does not switch my usb-stick XS Stick W14 into the
needed mode after I have detached and reattached the usb-stick,
till the next reboot.
Can you enable logging in /etc
Am Dienstag, 16. August 2011, 20:19:48 schrieb Josua Dietze:
Am 16.08.2011 14:41, schrieb Detlev Brodowski:
I have activated logging.
Thanks for the logs. They confirmed the bug very nicely.
I've done some testing and found one system where the same error was
occurring. For a fix, edit
regards
Detlev
-- System Information:
Debian Release: 6.0.2
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'stable-updates'), (500,
'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale
!
Detlev
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
*
+debian/tmp/usr/lib/bluez/udev/hid2hci /lib/udev
==
Kind regards,
Detlev
diff -ur bluez-4.93_without_hid2hci/debian/bluez_agent.udev bluez-4.93/debian/bluez_agent.udev
--- bluez-4.93_without_hid2hci/debian/bluez_agent.udev 2011-05-30 20:11:37.727321967 +0200
+++ bluez-4.93/debian
it should be depend on the package kdelib5-data.
Kind regards,
Detlev Brodowski
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE
Package: kdenlive
Version: 0.7.5+svn3969-1
Severity: normal
Hello all,
The amd64 kdenlive package should have the same libmlt2 and libmlt++3 package
dependency as the i386 kdenlive package.
Kind regards,
Detlev Brodowski
-- System Information:
Debian Release: squeeze/sid
APT prefers
Package: openldap
Severity: wishlist
Please package the new OpenLDAP release 2.4.16 for Debian. Several gnutls
issues have been fixed with this release.
Thanks in advance
Detlev Brodowski
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable
Package: tomcat5.5
Version: 5.5.26-3
Severity: minor
The log files in /var/log/tomcat5.5/ should have the same group
permissions as the other log files in the debian system
-rw-r- tomcat55 adm
Kind regards,
Detlev Brodowski
-- System Information:
Debian Release: lenny/sid
APT prefers
however to add probes for both versions so that we are backward
compatible. I was simply not sure how to do that in a suiting elegant
way ;)
Cheers
Detlev
diff -ur orig/libacpi-0.2/libacpi.c libacpi-0.2/libacpi.c
--- orig/libacpi-0.2/libacpi.c 2008-06-09 18:56:56.0 +0200
+++ libacpi-0.2
Package: bacula
Severity: wishlist
Hello maintainer,
There is a new upstream version (2.2.0) available. It would be nice if you
prepare packages of this version.
Thanks in advance,
Detlev
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable
Package: libbluetooth2
Version: 3.10-1
Severity: wishlist
Hello maintainers,
There is a new version from upstream available. It would be nice if you
provide new Debian packages.
Thanks in advance,
Detlev
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy
Package: bluez-utils
Version: 3.7-1
Followup-For: Bug #425678
Hello maintainers,
There is another new version from upstream available (3.11). It would be nice
if you
provide new Debian packages.
Thanks in advance,
Detlev
-- System Information:
Debian Release: lenny/sid
APT prefers
Package: linux-source-2.6.21
Version: 2.6.21-4
Severity: wishlist
Hello Debian Kernel Team,
Please apply the available patch 2.6.21-mh1 from BlueZ project website
http://www.bluez.org/ to solve various problems with the L2CAP and RFCOMM
protocol layers.
Thanks in advance,
Detlev
-- System
(= 4.0.13)
Thanks and best regards,
Detlev Brodowski
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.14-db-msi
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8
Package: bacula
Severity: wishlist
Please package bacula 1.38.0.
It has many improvements.
Thanks,
Detlev
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux
is to change the package-dependence form
postgresql-client (= 7.4) to
postgresql-client-8.1 | postgresql-client-8.0 | postgresql-client (= 7.4).
Best regards,
Detlev
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686
;
foreach my $file (@{$ra_files}) {
chomp $file;
Best regards,
Detlev Brodowski
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
=de_DE.UTF-8 (charmap=UTF-8)
Hello,
please update the package-dependences (rebuild) for the new apt 0.6.
Thanks
Detlev Brodowski
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
74 matches
Mail list logo
