Bug#1079593: tayga: systemd unit doesn't support CONFIGURE defaults

Package: tayga Version: 0.9.2-10 Followup-For: Bug #1079593 Example nat64.network using values copied from the example tayga.conf: [Match] Name=nat64 [Link] RequiredForOnline=no [Network] LinkLocalAddressing=no [Route] # /etc/tayga.conf dynamic-pool Destination=192.168.255.0/24 [Route] # /etc

Bug#1079593: tayga: systemd unit doesn't support CONFIGURE defaults

Package: tayga Version: 0.9.2-10 Severity: normal /etc/init.d/tayga supports CONFIGURE_IFACE and CONFIGURE_NAT44 which default to "yes" in /etc/default/tayga. The systemd unit does not support either of them, so when switching over to the systemd unit then the interface and natting is not configur

Bug#1039390: tayga: ships sysv-init script without systemd unit

Package: tayga Version: 0.9.2-9 Followup-For: Bug #1039390 The systemd service unit is now installed, but it fails to start. It uses %i, so the filename should be tayga@.service (not tayga.service). Also since the existing conf file is at /etc/tayga.conf, it has to be ?manually? migrated to /etc/

Bug#1069087: systemstats_linux: unexpected header length

Package: snmpd Version: 5.9.4+dfsg-1.1+b1 Followup-For: Bug #1069087 Control: tags -1 patch There is a fix available upstream: https://github.com/net-snmp/net-snmp/commit/49d60ba57f4b462df7dc5fd5b38b4425dab0982c -- System Information: Debian Release: trixie/sid APT prefers testing APT polic

Bug#964458: checkinstall: causes segfault of cmake

Package: checkinstall Version: 1.6.2+git20170426.d24a630-3 Followup-For: Bug #964458 Actually the 0014-fix-xstat64.patch already tries to fix this, but applies the fix too late in the function. If it was reworked to move the new code up ~10 lines (to before the "real" mode check), then it would r

Bug#1001004: dkms: Fail to remove modules

sting are going to have to manually downgrade to 2.8.4, or upgrade to 3.0.3, because I think it's unlikely that there will be a 2.8.8 release just for testing. -- - Norman Rasmussen - Email: nor...@rasmussen.co.za - Home page: http://norman.rasmussen.co.za/

Bug#1000890: Acknowledgement (libwxbase3.0-0v5: wxStandardPaths::GetDocumentsDir should not return a quoted string)

This is now backported into the WX_3_0_BRANCH with https://github.com/wxWidgets/wxWidgets/pull/2624.

Bug#1000890: libwxbase3.0-0v5: wxStandardPaths::GetDocumentsDir should not return a quoted string

Package: libwxbase3.0-0v5 Version: 3.0.5.1+dfsg-2 Severity: normal Tags: patch wxStandardPaths::GetDocumentsDir returns a string with quotes at the start and end. It should not do this. In https://github.com/wxWidgets/wxWidgets/commit/a0fb80808771dfb27fcb452284a2cfdc9a9bf783 the code was changed t

Bug#998158: mrtg: Environment Variables missing

Package: mrtg Version: 2.17.8+git20211022.f52e91e-1 Severity: normal The Environment Variables available to External Monitoring Scripts are changed significantly when running under systemd. USER and HOME are two examples of useful variables that are missing. They would normally be set by systemd

Bug#998152: snmpd: "systemctl reload snmpd" fails to read snmpd.conf

Package: snmpd Version: 5.9.1+dfsg-1 Severity: normal /etc/snmp/snmpd.conf is owned by root:root with mode 600 (since the 3.4-2 release), but it runs as a limited user (Debian-snmp) so it can't re-read its own configuration once it has changed user. Either the limited user needs to be able to rea

Bug#972726: dh-python: uninstallable when python-is-python2 is installed

Package: dh-python Version: 4.20201102+nmu1 Followup-For: Bug #972726 Note that python-is-python2 (2.7.18-8) provides python (= 2.7.18-1), so the breaks has to be python (<< 2.7.18-1), otherwise it will conflict with python provided by python-is-python2. -- System Information: Debian Release: bu

Bug#972726: dh-python: uninstallable when python-is-python2 is installed

Package: dh-python Version: 4.20201102+nmu1 Followup-For: Bug #972726 I think this is due to the fix for #966832, which added breaks python. I think that was reported as #968046, which was fixed by adding a versioned breaks python2, but did not change the breaks python. I assume the breaks on pyt

Bug#962926: Images of aptitude screens are illegible due to being scaled to browser width

Package: aptitude-doc-en Version: 0.8.13-3 Followup-For: Bug #962926 With respect to asciinema: I found two asciicast to svg converters: - https://github.com/marionebl/svg-term-cli (MIT) - https://github.com/nbedos/termtosvg (BSD-3-Clause) Both generated an animated svg by default, but have an

Bug#931402: could not leave editor on examining a config file conflict

Package: dpkg Version: 1.20.7.1 Followup-For: Bug #931402 I can reproduce this in just the shell that's started. Ctrl-C doesn't seem to have any immediate effect. However once the shell is exited, the Ctrl-C causes dpkg to terminate early. I suspect that dpkg isn't creating a new foreground proce

Bug#979012: minetest-data: debian/copyright needs updating

Package: minetest-data Version: 0.4.15+repack-1 Severity: serious Justification: Policy 12.5 Dear Maintainer, minetest-data 0.4.15 cleaned up usage of the WTFPL license, but debian/copyright still references it. It looks like the MIT license was chosen to replace the existing license, but it was

Bug#935355: xdu: synthesized nodes are absurdly large

Package: xdu Version: 3.0-19 Severity: normal Tags: patch Nodes that do not appear in the input file have a huge size (near MAXINT) due to an incorrect constant type. See attached patch for a fix. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (700, 'testing

Bug#922875: xdu: miscounts the size of root directory

Package: xdu Version: 3.0-19 Followup-For: Bug #922875 Dear Maintainer, Here's a patch to fix the issue. -- System Information: Debian Release: 10.0 Architecture: amd64 (x86_64) Kernel: Linux 4.14.0-2-amd64 (SMP w/12 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LA

Bug#930254: cacti 1.2.2 fails to read snmp gauges

Package: cacti Version: 1.2.2+ds1-2 Severity: normal Cacti 1.2.2 has a bug where snmp gauges read as zero - https://github.com/Cacti/cacti/issues/2474 The bug was fixed for version 1.2.3 (and 1.2.4 was released just 2 days ago too). -- System Information: Debian Release: buster/sid APT prefers

Bug#930252: cacti should depend on php-gmp

Package: cacti Version: 1.2.2+ds1-2 Severity: normal cacti 1.2.0 (and higher) require php-gmp to be installed (currently it's only recommended) ref: https://github.com/Cacti/cacti/issues/1952 -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (700, 'testing'), (

Bug#926064: wpa: Update Build-Depends: libnl-3-dev (>= 3.4)

Source: wpa Version: 2:2.7+git20190128+0c1e29f-3 Severity: normal wpa fails to build against libnl-3-dev=3.2.27-1. It tries to include macsec.h which is only available in libnl-3-dev=3.4.0-1. ../src/drivers/driver_macsec_linux.c:19:10: fatal error: netlink/route/link/macsec.h: No such file or dir

Bug#765820: libxapian22: please add multi-arch support for libxapian22

Source: xapian-core Followup-For: Bug #765820 Updated patch for the cpp5 transition. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (x86_64) Foreign Architecture

Bug#779105: tayga: add CLAT (464XLAT) support

Package: tayga Followup-For: Bug #779105 I think you're looking for something like https://github.com/toreanderson/clatd It's a wrapper around tayga to do exactly as you described. afaik there's no debian packages for clatd, and no ITP either. So maybe that's the next step for this bug?

Bug#798774: pptpd: kernel NAT helper loader file added to the wrong directory

Package: pptpd Version: 1.4.0-6 Severity: normal update-initramfs emits the following error several times: libkmod: ERROR ../libkmod/libkmod-config.c:635 kmod_config_parse: /etc/modprobe.d/pptpd.conf line 1: ignoring bad line starting with 'nf_nat_pptp' I think that bug #780181 should have adde

Bug#765820: xapian-core: Updated patch for xapian-core 1.2.21

Source: xapian-core Followup-For: Bug #765820 Here's an updated patch for 1.2.21. It also patches original source files instead of derived files (eg: debian/control.in instead of debian/control) -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (700, 'testing'), (650

Bug#764991:

Just to clarify: What cgroups entries should be in /etc/fstab? I had one, and found this bug, and removed it and things starting working better. I finally got things working by upgrading kernel from 3.14 to 3.16 and rebooting, so who knows which part of that made it work properly. I also noted t

Bug#759745:

Just my 2c: I had the same problem, and only upgrading to the new packages (0.33-2 and 8-3) wasn't enough. #764991 was involved too (as when I remount mount entries stuff got better, but not fixed). In the end I upgraded the kernel from 3.14 to 3.16 - which required a reboot, and I suspect that h

Bug#765820: libxapian22: please add multi-arch support for libxapian22

Package: libxapian22 Version: 1.2.18-1.1 Severity: normal Tags: patch User: crossbu...@debian.org Usertags: cross Hi there, Please find attached a patch to xapian-core to transition it to use of the multiarch library paths as described at . Both a

Bug#764390: synergy: New upstream version

Package: synergy Version: 1.4.16-1 Severity: normal According to http://svn.synergy-project.org/trunk/ChangeLog the latest version is 1.6.0. It looks like the tarball downloads are not behind a $5 paywall, but SVN seems to be available for no charge. -- System Information: Debian Release: jessie

Bug#764389: synergy: Linux Chrome hover doesn't work

Package: synergy Version: 1.4.16-1 Severity: normal Tags: upstream patch Since Chrome 31, synergy has broken mouse hover if Chrome uses hardware acceleration. The upstream bug [1] has a patch to work around the X11 bug that causes this in comment #65. Multiple people has confirmed that the patch

Bug#727758:

Another data point which looks very similar: I printed several hundred jobs today (all the same 1 page), and cups crashed once with: cupsd[8171]: segfault at f75fc814 ip f76413f8 sp ffbb3980 error 7 in libdbus-1.so.3.7.4[f7618000+49000]

Bug#723196: apache2: Typo in conf-available/serve-cgi-bin.conf

Package: apache2 Version: 2.4.6-3 Severity: minor s/ENALBLE_USR_LIB_CGI_BIN/ENABLE_USR_LIB_CGI_BIN/ -- Package-specific info: -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstable'), (550, 'experimental') Archite

Bug#663927:

see: http://bugs.python.org/issue13736

Bug#687094: whois: new whois service for the co.za domain

Package: whois Version: 5.0.18 Severity: normal Please see: https://www.registry.net.za/noticeboard.php Item titled: We are pleased to announce a new whois service for the co.za domain providing EPP status details. Date posted: 12-06-2012 Usage is as follows whois -h whois.registry.net.za $hos

Bug#684027: ftp-ssl: New upstream version

Package: ftp-ssl Severity: normal ftp is version 0.17-27 already, can we get an update for ftp-ssl? -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (x86_64) Kerne

Bug#674768: mysql-workbench should depend on python-all

Package: mysql-workbench Version: 5.2.38+dfsg-3 Severity: normal Depending on python-all is overkill if the package already depends on python and python2.7. I think only one python package should be depended on. -- System Information: Debian Release: wheezy/sid APT prefers testing APT polic

Bug#625988: BIND 9.8

Friendly ping?

Bug#644040: please provide a libgconf2-4-dbg package

Package: libgconf2-4 Version: 2.32.4-1 Severity: normal /usr/lib/libgconf-2.so.4.1.5 is stripped, it would be nice to have a non-stripped copy in a dbg package. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstabl

Bug#609540: Silently SIGSEVs on certain interfaces (ppp0, sixxs)

The following patch fixes the segfault: --- a/addrs_ioctl.c 2010-11-27 10:56:44.0 + +++ b/addrs_ioctl.c 2011-05-07 02:16:28.0 +0100 @@ -132,6 +132,9 @@ if (strcmp(ifa->ifa_name, interface)) continue; /* Not our interface. */ +if ( ! ifa->ifa_addr )

Bug#626088: libpocomysql9: relocation error: /usr/lib/libPocoMySQL.so.9: symbol __cxa_pure_virtual

Package: libpocomysql9 Version: 1.3.6p1-1+b2 Severity: grave Tags: sid Justification: renders package unusable The +b2 binary rebuild isn't compiled correctly. Reverting to +b1 makes everything work again. I read somewhere that it libstdc++ must be installed at compile time so that g++ instead

Bug#625988: bind9: New upstream version 9.8.0-P1

Package: bind9 Version: 1:9.7.3.dfsg-1+b1 Severity: normal Upstream has 9.8.0-P1 available, it would be nice to see this packaged. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstable'), (550, 'experimental') Arc

Bug#609540: Silently SIGSEVs on certain interfaces (ppp0, sixxs)

Package: iftop Version: 0.17-17 Followup-For: Bug #609540 I see this too, and noticed that 1.0pre1 is available from http://www.ex-parrot.com/pdw/iftop/ so maybe that fixes the segfault? -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (700, 'testing'), (650,

Bug#604121: fswebcam: new upstream version (fixes memory leak in loop mode)

Package: fswebcam Version: 20100622-1 Severity: normal New upstream version 20101118 is available: - Enable libgd fontconfig support if avaiable. Default font is now "sans:10". - Add S561 compressed palette support. - Fix small memory leak in the logging system. - Add option to swap colou

Bug#594718: jabber-muc: obsolete init.d script left behind

Package: jabber-muc Version: 0.8-3 Severity: important sysv-rc complained that: package jabber-muc left obsolete init.d script behind I found a similar bug 550229 that mentions that http://wiki.debian.org/DpkgConffileHandling is a good place to look for information on how to remove or move a co

Bug#594716: jabber-irc init script is missing LSB tags and overrides

Package: jabber-irc Version: 0.4cvs20080505-1.1 Severity: normal sysv-rc complains that: insserv: warning: script 'jabber-irc' missing LSB tags and overrides See http://wiki.debian.org/LSBInitScripts/DependencyBasedBoot for more information about dependency based boot sequencing. To reattempt the

Bug#582462: pydf still outputs default color marker at end of line in black-and-white mode

Package: pydf Version: 8 Severity: normal running pydf --bw still emits ^[[0m at the end of lines, eg: pydf --bw | cat -v -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (700, 'testing'), (650, 'stable'), (600, 'unstable'), (550, 'experimental') Architectu

Bug#547767: Important new upstream release (2.2.9, released Sun, 05 Jul 2009)

Package: jabberd2 Version: 2.2.8-2 Severity: normal For those desperate for 2.2.9, I have a binary build, see http://www.darkskies.za.net/~norman/jabber/sources.list -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas

Bug#569070: speedometer: should depend on urwid >= 0.9.9.1

Package: speedometer Version: 2.6-2 Severity: important running with uriwd 0.9.9-2 I get this error for speedometer -rx eth0 -tx eth0: File "/usr/bin/speedometer", line 244, in render w = self.build_pile( self.widget_list,maxrow ) File "/usr/bin/speedometer", line 254, in build_pile h

Bug#568635: Add DKMS support to xtables-addons

Package: xtables-addons Version: 1.21-1 Severity: wishlist DKMS allows modules to be automatically rebuilt for new kernels as they're installed, etc. It would be useful to support that for xtables-addons. -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (750

Bug#567892: randomsound: should be able to specify command line (parameters to pass) to arecord

Package: randomsound Version: 0.2-5 Severity: normal The hardcoded options that randomsound passes to arecord are a complete failure on my server (default sound device doesn't support recording in mono). It should be possible to pass the complete command line to exec arecord with to randomsoun

Bug#565652: squid3: /etc/resolvconf.d/ should be /etc/resolvconf/

Package: squid3 Version: 3.0.STABLE19-1 Severity: normal The resolvconf folder is /etc/resolvconf/ and not /etc/resolvconf.d/ -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (750, 'stable'), (700, 'testing'), (600, 'unstable'), (550, 'experimental') Architec

Bug#565465: jabberd2: fatally incompatible with gsasl 1.4

Package: jabberd2 Version: 2.2.8-2+b1 Severity: grave Justification: renders package unusable When libgsasl7 is upgraded to 1.4 (from 1.1), jabberd2 fails to start. [error] failed to initialise SASL context, aborting -- System Information: Debian Release: squeeze/sid APT prefers stable APT p

Bug#564147: chkrootkit: false positive: scalper rootkit and ser2net debian package both listen on port 2001 by default

Package: chkrootkit Version: 0.49-3 Severity: normal subject says it all -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (750, 'stable'), (700, 'testing'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/

Bug#563556: mrtgutils: patch to fix segfault and update to libsensors4 for bug 563556

rtgutils (0.7+nr1) unstable; urgency=low + + * Non-maintainer upload. + * Migrate to libsensors4. Closes: #563556 + + -- Norman Rasmussen Sun, 03 Jan 2010 20:07:12 + + mrtgutils (0.7) unstable; urgency=low * The "It's time to grown up" release diff -ur mrtgut

Bug#563556: mrtgutils: patch to fix segfault and update to libsensors4 for bug 563556

) unstable; urgency=low + + * Non-maintainer upload. + * Migrate to libsensors4. Closes: #563556 + + -- Norman Rasmussen Sun, 03 Jan 2010 20:07:12 + + mrtgutils (0.7) unstable; urgency=low * The "It's time to grown up" release diff -ur mrtgutils-0.7/debian/control mrtgu

Bug#563556: mrtgutils: mrtg-sensors segfaults if the sensor is not found (fwd)

Package: mrtgutils Version: 0.7 Severity: normal $ mrtg-sensors a-a-1 a Segmentation fault looking at the code, it looks like gotchip is never checked before use. (as a side note, acpitz-virtual-0 can't be found even though sensors lists it) -- System Information: Debian Release: squeeze/sid

Bug#521351: python-gdata: New upstream version available (2.0.2)

Package: python-gdata Version: 1.1.1-1 Followup-For: Bug #521351 Version 2.0.2 is now available -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (750, 'stable'), (700, 'stable'), (650, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-23-xen (SMP w/4 CP

Bug#543415: jabberd2: debian/watch url has changed

Package: jabberd2 Version: 2.2.8-2 Severity: minor url should be http://codex.xiaoka.com/pub/jabberd2/releases/ -- System Information: Debian Release: 5.0.2 APT prefers stable APT policy: (750, 'stable'), (700, 'stable'), (650, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-23

Bug#533653: xtables-addons-source: Should depend on quilt

Package: xtables-addons-source Version: 1.16-1 Severity: normal Setting up xtables-addons-source (1.16-1) ... Updating info about xtables-addons-source Updated infos about 1 packages unpack Extracting the package tarball, /usr/src/xtables-addons.tar.bz2, please wait... "/usr/share/modass/packages

Bug#337540: jabberd2*: provided transports not forward-compatible to jabberd2

The preferred way forward with transports is to migrate to external transports, generally this also means the python based ones instead of the old c based ones. i.e. {jabber-aim, jabber-icq, jabber-msn, jabber-yahoo} are deprecated in favor of {pyaimt, pyicqt, pymsnt, pyyimt} -- - Norman

Bug#528105: jabberd2-resolver no longer exists, but it still has a start up script

Package: jabberd2 Version: 2.2.8-1 Severity: normal /usr/sbin/jabberd2-router is now part of /usr/sbin/jabberd2-s2s, so it no longer exists as a daemon, but /etc/jabberd2/component.d/20resolver still exists (even though it does nothing, because the daemon it controls no longer exists) - it shou

Bug#518656: alsaplayer-common: reader.http should respect http_proxy

Package: alsaplayer-common Version: 0.99.76-9+etch1 Severity: wishlist should, but it doesn't :-) probably an item that needs to be forwarded upstream -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (750, 'stable'), (700, 'testing'), (600, 'unstable'), (550,

Bug#475643: bittornado: patch to support --bind on outgoing connections

Package: bittornado Version: 0.3.18-8 Followup-For: Bug #475643 An update to the previous patch. This now works for btlaunchmany too. -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (750, 'stable'), (700, 'testing'), (600, 'unstable'), (550, 'experimental') Archite

Bug#475643: bittornado: patch to support --bind on outgoing connections

Package: bittornado Version: 0.3.18-8 Followup-For: Bug #475643 Here's a patch to add support for binding to the first address listed in --bind. It only affects data connections, but afaic that's more important than tracker connections (tracker connections can always be 'fixed' with --ip). It

Bug#510449: pydf: Add -i option to list inode information instead of block usage, just like df

Package: pydf Version: 6 Severity: wishlist Just like df: -i, --inodes list inode information instead of block usage (basically means using statvfs's FILEs constants instead of BLOCKs) -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (750, 'stab

Bug#502402: wnpp: ITP: xtables-addons -- Extensions for iptables

Yes, please. I opened 503193 against iptables because TARPIT was removed, but very sensibly it's now a "WON'TFIX" bug. The netfilter-extensions(-source) package is effectively unusable at this point with out the user-space libraries for the extra modules. -- - Norman Rasmu

Bug#503193: iptables: Please create a package with pomng extensions that were removed

Package: iptables Version: 1.4.1.1-3 Severity: normal in 1.4.1.1-1 all pomng extensions: TARPIT, IPV4OPTSSTRIP and ipv4options, were removed. Please create a new package that contains these extentions so that `module-assistant auto-install netfilter-extensions` can work out-of-the-box again. --

Bug#486745: allow more than one interface option

iest match. On Linux systems with 2.2 or later kernels, an interface argument of ``any'' can be used to capture packets from all interfaces. Note that captures on the ``any'' device will not be done in promiscuous mode. Cheers Norman -- - No

Bug#494628: Acknowledgement (jabberd2: New upstream version available)

FYI: I have made my own build available via apt: deb http://www.darkskies.za.net/~norman/jabber deb/

Bug#494625: Acknowledgement (gsasl: New upstream version available)

FYI: I have made my own build available via apt: deb http://www.darkskies.za.net/~norman/jabber deb/

Bug#494628: jabberd2: New upstream version available

Package: jabberd2 Version: 2.2.1-1 Severity: wishlist jabberd2 2.2.3 has an important bugfix to stop c2s crashing on unauthenticated connections. depends on libgsasl-dev 0.2.27 - bug #494625 -- System Information: Debian Release: lenny/sid APT prefers stable APT policy: (750, 'stable'), (700

Bug#494625: gsasl: New upstream version available

Package: gsasl Version: 0.2.21-2+b1 Severity: wishlist required for jabberd2 2.2.3 -- System Information: Debian Release: lenny/sid APT prefers stable APT policy: (750, 'stable'), (700, 'testing'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686

Bug#451294: [Pkg-net-snmp-devel] Bug#451294: ipAddressTable crash?

) ... Starting network management services: snmpd. And the snmpd daemon is no longer crashing when the pppoe tunnel is established. So you can mark this one as WORKS-FOR-ME. -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to

Bug#451294: ipAddressTable crash?

This seems to be directly related to my incoming VPN connection (via pptpd). I'm running IPv6 and radvd over the interface so that might be additionally confusing snmpd. If I down the VPN on the client, then snmpd on the server stays up and running. -- To UNSUBSCRIBE, email to [EMAIL PROTECTE

Bug#444821: pppoe: Source address patch forces promiscuous mode

Package: pppoe Version: 3.8-3 Severity: important Tags: patch Re: the last comment for bug 298202 [1] highlights a bug caused by the patch from bug 419677 [2]. [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=298202 [2] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=419677 Basically with t

Bug#438785: phpwiki: add libapache2-mod-php5 to php depends list

Package: phpwiki Version: 1.3.12p3-6 Severity: normal depends is currently: php4 | php5 | libapache2-mod-php4 should it not read: php4 | php5 | libapache2-mod-php4 | libapache2-mod-php5 -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (700, 'testing'), (

Bug#423549: whois: Add support for .za.net, .za.org, and return support for .org.za

Package: whois Version: 4.7.22 Followup-For: Bug #423549 This bug has not been fixed, there was an entry added to the tld_serv_list, but it points to the wrong whois server. Here's a patch to fix the tld_serv_list correctly (also attached): --- tld_serv_list 2007-07-28 22:58:24.0 +

Bug#423551: closed by [EMAIL PROTECTED] (Marco d'Itri) (Re: Bug#423551: whois: Add support for HTTP GET)

On 7/28/07, Marco d'Itri wrote: > > On May 12, Norman Rasmussen <[EMAIL PROTECTED]> wrote: > > > The attached patch adds support for HTTP GET to whois. The idea is that > > several of the existing 'WEB' suffixes which cause whois to print out: > I do

Bug#386748: new upstream release socat 1.6.0.0 available

I've built 1.6.0.0 and made it public here: http://www.darkskies.za.net/~norman/socat/ (add the lines in sources.list to your apt/sources.list file) Feel free to double check my changes and sponsor an upload :-) Cheers Norman -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page:

Bug#341499: jabber-muc: Update mu-conference to use jcr

The upstream svn (0.7-alpha) "runs really well, and fixes a lot of bugs", and even has a snapshot .tar.gz available. see: http://mail.jabber.org/pipermail/jadmin/2007-May/099339.html -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To U

Bug#423551: whois: Add support for HTTP GET

Package: whois Version: 4.7.20 Severity: normal Tags: patch The attached patch adds support for HTTP GET to whois. The idea is that several of the existing 'WEB' suffixes which cause whois to print out: 'This TLD has no whois server, but you can access the whois database at' could be converted to

Bug#423549: whois: Add support for .za.net, .za.org, and return support for .org.za

Package: whois Version: 4.7.20 Severity: normal Tags: patch The attached patch adds support for .za.net and .za.org. The commented out rwhois server for .org.za is working fine so I don't see any reason why it can't be used again. -- System Information: Debian Release: lenny/sid APT prefers te

Bug#274341: pppoe uses deprecated method in /usr/share/doc/pppoe/README.Debian.gz

On 4/16/07, Andreas Barth <[EMAIL PROTECTED]> wrote: * Norman Rasmussen ([EMAIL PROTECTED]) [070416 20:55]: > I'm going to poke this bug forward again, it bit me recently. I had > to read changelog.DEBIAN.gz to even notice that ppp_on_boot was > deprecated. Please feel fr

Bug#274341: pppoe uses deprecated method in /usr/share/doc/pppoe/README.Debian.gz

I'm going to poke this bug forward again, it bit me recently. I had to read changelog.DEBIAN.gz to even notice that ppp_on_boot was deprecated. -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] w

Bug#403985: apt-get update crashes in pkgAcqDiffIndex::ParseDiffIndex

I think this could this be related to #409336 and #400560 I got the same stack traces in my erratic testing (with 2.6.18 kernel). -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of

Bug#400560: aptitude: Uncaught Exception - problems after power fail even after deleting

I think this could this be related to #409336. I got the same stack trace in my erratic testing. -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Cont

Bug#409336: apt-get erratic (segfaults, unmet dependencies, hanging)

x/kernel/0612.3/0752.html -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#404100: greylistd: Add support for MRTG style output

Package: greylistd Version: 0.8.3.2 Severity: wishlist Tags: patch Here's a tiny patch to add support for MRTG compatible output: http://www.darkskies.za.net/~norman/greylist/ It makes it so that you can graph number of white/grey mails per hour, eg: ### System >> Greylist Target[greylist]: `g

Bug#387924: reportbug: use way too much memory (>90Mb)

are other reportbug bugs that might be 2.4 related around :-( -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#381360: python-xmpp: bad english in package description

I'll try and include this before we do a 0.4 release. -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#383619: ssldump: Add AES support from CVS

Package: ssldump Version: 0.9b3-2.1 Severity: important Tags: patch patch at: http://people.freebsd.org/~tmclaugh/files/ssldump-aes.diff some more info at: http://www.freshports.org/net/ssldump or: http://rpmfind.net/linux/RPM/suse/9.3/i386/suse/x86_64/ssldump-0.9b3-78.x86_64.html -- System Info

Bug#376894: [Xmpppy-devel] Fwd: Bug#376894: Uninstallable due to python transition

316B 53BB 08E7 F999 E544 DE07 9B7C 328D --- -- Respectfully Alexey Nezhdanov -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of &quo

Bug#366395: pptpd: New Upstream version - fixes reordering and loopback bugs

Package: pptpd Version: 1.2.3-1.1 Severity: important upstream: http://www.poptop.org/ current experimental version1.3.2 current stable version 1.3.0 1.3.0 fixes two problems that are plaguing my vpn connection: - ADSL packet re-ordering causes GRE to drop pakcets - Initial connection says

Bug#366356: libartsc0 should conflict with libarts

Package: libartsc0 Version: 1.5.2-1_i386 Severity: important # apt-get -f install Reading package lists... Done Building dependency tree... Done Correcting dependencies... Done The following extra packages will be installed: libartsc0 The following NEW packages will be installed: libartsc0 0 u

Bug#341499: jabber-muc: Update mu-conference to use jcr

t; On Nov 30, 2005, at 3:43 PM, Norman Rasmussen wrote: > > > Package: jabber-muc > > Version: 0.6.0-2 > > Severity: wishlist > > Tags: patch > > > > re: http://mu-conference.jabberstudio.org/docs/jabberd2.php > > > > It would be nice to see mu-co

Bug#341499: jabber-muc: Update mu-conference to use jcr

Package: jabber-muc Version: 0.6.0-2 Severity: wishlist Tags: patch re: http://mu-conference.jabberstudio.org/docs/jabberd2.php It would be nice to see mu-conference built with jcr, instead of depending on the jabberd1 package. This way we could uninstall jabberd1 when we're running jabberd2 and

Bug#319067: resolvconf: pdns fix breaks local dns interface

maintained. Yes, this does fix the problem! The question is where's the right place to fix it, versus where's the easiest place :-) -- - Norman Rasmussen - Email: [EMAIL PROTECTED] - Home page: http://norman.rasmussen.co.za/

Bug#319067: resolvconf: pdns fix breaks local dns interface

Package: resolvconf Version: 1.29 Severity: important The pdns fix has broken the local interface ordering, you probably want to change: lo.!(pdns|pdns-recursor) to lo!(.pdns|.pdns-recursor) or something like that, because it failed to sort my 'lo' interface before 'eth0'. i think this r

Bug#311170: jabberd2: photo support in mod_iq_vcard

Package: jabberd2 Severity: wishlist Tags: patch see: http://j2.openaether.org/bugzilla/show_bug.cgi?id=29 patch supplied, please make max_vcard_field_length a bit larger, I've seen some vcard photos up to 50kb in length, maybe 64kb is a nice 'round' number. Also please add the ALTER TABLE com

Bug#305024: jabberd2: New upstream version (2.0s8)

Package: jabberd2 Followup-For: Bug #305024 2.0s8 was released on Apr 20, can we get a build? Is it solid enough? -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (700, 'testing'), (600, 'unstable'), (550, 'experimental') Architecture: i386 (i586) Kernel: Linux 2.4.2

Bug#307529: More patches for openswan server behind NAT

Package: openswan Version: 2.3.0-2 Severity: important Tags: patch >From http://www.jacco2.dds.nl/networking/freeswan-l2tp.html - Section 19.2 Currently there is a problem when the Openswan server itself is behind NAT (or when both the client and the server are behind NAT). The Openswan team was

  1   2   >