Re: Problems with installing Debian Linux on a SATA hard disc

With ETCH Everything will be OK!! Greetings from Cuba. olr === El Lun, 29 de Octubre de 2007, 12:30 pm, Triskal escribió: > Hi there! > > I did a search for my problem, but couldn't find the answer. If I > overlooked it, I apologize. Also, I'm quite new to Linux (I've used it > for LaTeX, but no

Re: Problems with installing Debian Linux on a SATA hard disc

With ETCH Everything will be OK!! Greetings from Cuba. olr === El Lun, 29 de Octubre de 2007, 12:30 pm, Triskal escribió: > Hi there! > > I did a search for my problem, but couldn't find the answer. If I > overlooked it, I apologize. Also, I'm quite new to Linux (I've used it > for LaTeX, but no

Re: Switching kernel config from x86_64 to i686

In the root of the kernel sources do a make menuconfig, goto processor type and features and select the wanted option, recompile the kernel, install the kernel, update the bootloader and you're done, for the other stuff I don't know because me english it's a little scarse (yet), good luck friend.

Fglrx broken on 2.6.23 and 2.6.23.1

Yeah I know that this It's not very new, but yesterday I have been testing a patch for fix this and don't work, so my question is When it's supossed that ATI release the new 'updated' driver? I have been trying with the 8.40.4 and the new 8.41 but I got the same error from both packages, the error

Re: PCIe Video and Open source 3D drivers

El Dom, 7 de Octubre de 2007, 9:49 pm, Wakko Warner escribió: > Kelly Clowers wrote: >> > I was looking at a V5100 or V7100 (both based on the X800 or X850 >> chip). >> > But the question remains, is the R4xx chips supported in 3D? >> >> Yes r400 is supported: >> http://spearhead.wordpress.com/2007

Re: PCIe Video and Open source 3D drivers

El Lun, 8 de Octubre de 2007, 5:21 pm, Wakko Warner escribió: > Kelly Clowers wrote: >> On 10/7/07, Wakko Warner <[EMAIL PROTECTED]> wrote: >> > Thanks. I saw the X800 listed, unfortunately, ATI makes both a PCIe >> and an >> > AGP 8x version of the card. Not sure which they used. If you have a

Re: Anoying Fetchmail Behavior

El Jue, 4 de Octubre de 2007, 10:49 am, Andrew Sackville-West escribió: > On Thu, Oct 04, 2007 at 09:23:16AM -0400, Orestes Leal wrote: >> >> One detail it's that I run fetchmail every 10 seconds, it's this > bad? > > probably. I don't know what it does

Anoying Fetchmail Behavior

Hi Folks, I have a serious problem with fetchmail, I get every day this message fetchmail: skipping message [EMAIL PROTECTED]:1 not flushed fetchmail: skipping message [EMAIL PROTECTED]:2 not flushed fetchmail: skipping message [EMAIL PROTECTED]:3 not flushed fetchmail: skipping message [EMAIL PRO

Put a Separated Subtitle Inside the Xvid Movie

Dear friends, my situation it´s this, I have a movie (Xvid) with a separate subtitle (srt) , I want to know how i can put the subtitles into the movie file for later make a vcd (Mencoder?), just that, thanks a lot to all of you. olr.

Any Software for Export Video to the TV With my Nvidia card?

That's what I need folks, Thanks a lot. olr -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: I'm sorry

On Sat, 22 Sep 2007 22:11:03 -0400 "Adam Mercer" <[EMAIL PROTECTED]> wrote: > On 22/09/2007, Lo'oris <[EMAIL PROTECTED]> wrote: > > > > Any technology distinguishable from magic is insufficiently advanced. > > > > great quote! where does it come from? > > Its a rewording of one of Arthur C. Clar

Re: 3d acceleration on Ati with fglrx?

>> Has anyone had any success with 3d acceleration using fglrx on Debian? >> >> I'm currently on Debian testing, with kernel 2.6.21-2-686 #1 SMP. This >> is an Ati X-1400 card. I have 2d with fglrx but not 3d. I tried the I have a x800 XL Card and works pretty good to me!. >> Debian packages wit

Where, Doom3 For Linux Download

Hi Folks, I need a 'direct' download (with suport for resume) for download de Linux version of doom3, I have the original 3 CDs so the only thing that I need it´s the .run? or whatever for linux, any help will be thankfully appreciated, regards, olr

ATI Radeon All in Winder Video Capture in Linux

Hi folks, I want to hear some suggestions about video capture in linux, my status it´s the next, 1) Ati Radeon All in Wonder x800 XL 256 Megs GDDR3 PCIe 2) Sattelite hughes connected to my 3 rca entrys. 3) All the cable stuff are connected. So I need, and application to capture Video with my car

Xorg Only Recognize 128 megs From ATI Radeon AIW PCIe 256 Megs

Dear friends, I have a Ati Radeon All In Wonder x800 XL with 256 Megs GDD= R3 PCIe interface, I have the latest closed drivers from ati.com (fglrx) but Xorg 7.2 only recognize 128 megs, Any help? thanks, -olr

Re: Command to see ip address on etch stable

On Thu, 23 Aug 2007 17:31:03 -0400 Orestes leal <[EMAIL PROTECTED]> wrote: > > > On Thu, Aug 23, 2007 at 04:02:46PM -0500, Michael Kerwin wrote: > > > Is there a command on debian etch stable that you can run to see what ip > > > address you are? > > >

Re: Command to see ip address on etch stable

> On Thu, Aug 23, 2007 at 04:02:46PM -0500, Michael Kerwin wrote: > > Is there a command on debian etch stable that you can run to see what ip > > address you are? > Try this ifconfig eth0 | grep inet | awk '{ print $2 }' Where eth0 it's your first network card, and so on. Good Luck. -olr.

Re: Source of Debian wisdom

On Sun, 19 Aug 2007 14:10:27 -0400 Mark Neidorff <[EMAIL PROTECTED]> wrote: > Hi all, > > Recently I've set up a Debian Etch box which I'm nearly ready to bring up > full > time (currently using a different distribution...been a linux user for over > 10 years). > > Here's an example of what

Re: Wget don't resolv hostnames?

On Sat, 18 Aug 2007 14:22:42 -0400 Orestes leal <[EMAIL PROTECTED]> wrote: > Hi Folks, I ran wget in my system but when i try to get one file > for example > > > """" wget --server-response http://www.server.com/fichero.xml > --1

Wget don't resolv hostnames?

Hi Folks, I ran wget in my system but when i try to get one file for example wget --server-response http://www.server.com/fichero.xml --14:15:06-- http://www.server.com/fichero.xml => `fichero.xml' Resolving www.server.com... " ""And stays there with this message. Resolving

Re: Confused about kernel source location

El Mar, 14 de Agosto de 2007, 8:29 pm, Frank McCormick escribió: > >> On Mon, 13 Aug 2007 14:28:41 -0400 >> Jose Luis Rivas Contreras <[EMAIL PROTECTED]> wrote: >> >> > Frank McCormick wrote: >> > > I downloaded and installed the source for the current kernel, >> > > which aptitude dumped into /usr

Re: kernel compile module compile

Maybe this modules doesn't work 'yet' with that kernel, one Question, How do you build your kernel? it´s suggested by linux that the sources of the kernel must not be placed in /usr/src for example my kernel sources are in /kernelsource El Dom, 12 de Agosto de 2007, 2:08 pm, L.V.Gandhi escribió:

Re: No keyboard in X after upgrading to Etch

yeah, happens to me with gdm-2.14, but, does CTRL + ALT + F1 works ? I mean to go to the first tty/console? if it works from GDM to the terminal then the keyboard in X it´s working, I suggest you that start a session from the command line with the startx command and if this way don´t work do a 'Xor

Re: kernel compile -processor type

> What should be kernel compile -processor type for > Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz > -- > L.V.Gandhi > http://lvgandhi.tripod.com/ > linux user No.205042 > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECT

Re: shutdown

On Sun, 12 Aug 2007 10:41:02 -0400 Mark Grieveson <[EMAIL PROTECTED]> wrote: > Hello. I'm using Debian Etch. My machine does not completely shutdown > -- I'm required to manually press the button (it's like being back in > Win'95 times). I've tried both via gdm, and via the command line (if > I

Re: Recomendations - becoming a C soldier.

On Sun, 12 Aug 2007 14:55:06 +0100 "Ari Constancio" <[EMAIL PROTECTED]> wrote: > Sorry, couldn't resist :) > > http://norvig.com/21-days.html > > Ari Constancio > yeah, I'm already read it, and I think that it's one of the most realistic essays I've ever read, thanks again Ari. -olr -- To

Re: Recomendations - becoming a C soldier.

On Sun, 12 Aug 2007 07:31:59 -0500 Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote: > Orestes leal wrote: > > Hi folks, 2 weeks ago I began to learn C, > > my advances are very good, my question it's that, > > The topic sounds funny but it's mostly serious, > >

Re: Beginner has trouble with SDL in foll-screen mode.

On Fri, 10 Aug 2007 17:58:07 -0400 Orestes leal <[EMAIL PROTECTED]> wrote: > On Fri, 10 Aug 2007 21:39:47 + (UTC) > Hendrik Boom <[EMAIL PROTECTED]> wrote: > > > I have a small program that makes a time-varying pattern on the > > screen. It works fine

Re: Beginner has trouble with SDL in foll-screen mode.

On Fri, 10 Aug 2007 21:39:47 + (UTC) Hendrik Boom <[EMAIL PROTECTED]> wrote: > I have a small program that makes a time-varying pattern on the > screen. It works fine with SDL_RESIZABLE, but not with SDL_FULLSCREEN. > > In full-screen mode everything is sheared off into wavy lines, as if the

Re: Recomendations - becoming a C soldier.

On Fri, 10 Aug 2007 20:30:58 GMT "s. keeling" <[EMAIL PROTECTED]> wrote: > Orestes leal <[EMAIL PROTECTED]>: > > Hi folks, 2 weeks ago I began to learn C, my advances are very > > good, my question it's that, The topic sounds funny but it's most

Re: Recomendations - becoming a C soldier.

On Fri, 10 Aug 2007 15:37:36 -0500 Ron Johnson <[EMAIL PROTECTED]> wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On 08/10/07 13:27, Orestes leal wrote: > > Hi folks, 2 weeks ago I began to learn C, my advances are very > > good, my question it'

Re: How to add dir to path

On Fri, 10 Aug 2007 12:45:40 -0500 "Mumia W.." <[EMAIL PROTECTED]> wrote: > On 08/07/2007 10:32 AM, Manon Metten wrote: > > Hi, > > > > I want to add the dir ~/scripts to my path, what command do I use for that? > > > > M> echo $PATH > > /usr/local/bin:/usr/bin:/bin:/usr/games > > > > But how d

Recomendations - becoming a C soldier.

Hi folks, 2 weeks ago I began to learn C, my advances are very good, my question it's that, The topic sounds funny but it's mostly serious, QUESTION: Studying C 'every day' 4 hours with good understanding, writing at least 10 programs to test this knowledge every day, the question it: How Long Ca

Re: why can't feh view tiff images

On Wed, 8 Aug 2007 14:13:36 -0700 David Brodbeck <[EMAIL PROTECTED]> wrote: > > On Aug 8, 2007, at 1:30 PM, Lic. Orestes leal wrote: > > > On Wed, 08 Aug 2007 08:48:40 +0200 > > Samuel Bächler <[EMAIL PROTECTED]> wrote: > > > >>> I'm usin

Re: why can't feh view tiff images

On Wed, 08 Aug 2007 08:48:40 +0200 Samuel Bächler <[EMAIL PROTECTED]> wrote: > > I'm using feh to view most the images that I have but whenever I try > > to open a tiff file using feh, it just shows a blank black screen. > > Any ideas? I read up on the documentation but could not find anything > >

Re: aticonfig and xorg.conf

On Mon, 6 Aug 2007 12:42:05 +0200 Gerard Robin <[EMAIL PROTECTED]> wrote: > Hello, > my box: acer aspire 51O2wlmi (amd64) > dist: Debian unstable (gnome metacity) > > aticonfig --initial : > Uninitialised file found, configuring. > Using /etc/X11/xorg.conf > Saved back-up to /etc/X11/xorg.conf.or

What's The Status of Gatos With Xorg-7.2 and Ati Radeon all in Wonder x1300 PCIe 256 ?

Hello friends, anyone knows somehting about this? Greetings from Cuba. Orestes -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: OpenGL programming for GNU/Linux

On Mon, 23 Jul 2007 17:45:51 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Mon, Jul 23, 2007 at 03:37:37PM -0400, Lic. Orestes leal wrote: > > On Mon, 23 Jul 2007 15:11:13 -0400 > > Gregory Seidman <[EMAIL PROTECTED]> wrote: > > > On Mon, Jul 23, 20

Re: OpenGL programming for GNU/Linux

On Mon, 23 Jul 2007 17:45:51 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Mon, Jul 23, 2007 at 03:37:37PM -0400, Lic. Orestes leal wrote: > > On Mon, 23 Jul 2007 15:11:13 -0400 > > Gregory Seidman <[EMAIL PROTECTED]> wrote: > > > On Mon, Jul 23, 20

Re: OpenGL programming for GNU/Linux

On Mon, 23 Jul 2007 17:45:51 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Mon, Jul 23, 2007 at 03:37:37PM -0400, Lic. Orestes leal wrote: > > On Mon, 23 Jul 2007 15:11:13 -0400 > > Gregory Seidman <[EMAIL PROTECTED]> wrote: > > > On Mon, Jul 23, 20

Re: OpenGL programming for GNU/Linux

On Tue, 24 Jul 2007 00:01:14 +0200 "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > On Mon, 23 Jul 2007 15:37:37 -0400 > "Lic. Orestes leal" <[EMAIL PROTECTED]> wrote: > > > On Mon, 23 Jul 2007 15:11:13 -0400 > > Gregory Seidman <[EMAIL PRO

Re: OpenGL programming for GNU/Linux

On Mon, 23 Jul 2007 15:11:13 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Mon, Jul 23, 2007 at 02:29:51PM -0400, Lic. Orestes leal wrote: > > On Sun, 22 Jul 2007 15:51:40 -0400 > > Gregory Seidman <[EMAIL PROTECTED]> wrote: > > > On Sun, Jul 22, 20

Re: OpenGL programming for GNU/Linux

On Mon, 23 Jul 2007 15:11:13 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Mon, Jul 23, 2007 at 02:29:51PM -0400, Lic. Orestes leal wrote: > > On Sun, 22 Jul 2007 15:51:40 -0400 > > Gregory Seidman <[EMAIL PROTECTED]> wrote: > > > On Sun, Jul 22, 20

Re: OpenGL programming for GNU/Linux

On Sun, 22 Jul 2007 15:51:40 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Sun, Jul 22, 2007 at 12:55:18PM -0400, Lic. Orestes leal wrote: > [...] > > QUESTION: How I become a very good OpenGL programmer let's say in 3 years? > > ANSWER: Program lots of OpenG

Re: OpenGL programming for GNU/Linux

> On Sun, Jul 22, 2007 at 09:39:20AM -0400, Lic. Orestes leal wrote: > > > > Hi, my respects to all members. > > > > I'm searching for a book about OpenGL programming > > that i'ts focused only in linux, can anyone comment me > > or ge

OpenGL programming for GNU/Linux

Hi, my respects to all members. I'm searching for a book about OpenGL programming that i'ts focused only in linux, can anyone comment me or get me any address to find out this info on the net? Thanks, Cheers, Orestes -- Orestes <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTE

Re: Beautyfuls OpenGL ScreenSavers

> -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On 07/20/07 14:20, Orestes leal wrote: > >> -BEGIN PGP SIGNED MESSAGE- > >> Hash: SHA1 > >> > >> On 07/19/07 00:51, Orestes Leal wrote: > >>> Hi, Folks, > >>

Re: Beautyfuls OpenGL ScreenSavers

> -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On 07/19/07 00:51, Orestes Leal wrote: > > Hi, Folks, > > > > I need a package of ScreenSavers to use > > with my OpenGL Accelerated Drivers (ATI) > > that comes with beautyfuls screensavers, &g

Re: Why this crontab does not work?

On Jue, 19 de Julio de 2007, 12:13 am, CaT dijo: > On Thu, Jul 19, 2007 at 12:13:42PM +0800, Magicloud Magiclouds wrote: >> Dear all, >>I have a crontab like this: >> >> [EMAIL PROTECTED] # crontab -l >> # m h dom mon dow command >> * 0,12* * * root/root/updat

Beautyfuls OpenGL ScreenSavers

Hi, Folks, I need a package of ScreenSavers to use with my OpenGL Accelerated Drivers (ATI) that comes with beautyfuls screensavers, like The Matriz3D, Lights, Water, Sounds, etc, any answer? any site? NOTE: Not only a package, separate files are accepted too, sources, packages, everything. Bes

What Can I Play With an Radeon X1300 All in Wonder PCIe 256Megs GDDR3

Hi, Folks, Mi Question it's, With this card and the fglrx driver to the latest update, and 512 megs of ram Can I I play Doom3, or similars in ETCH? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: no network/eth0 with etch

On Wed, 11 Jul 2007 12:00:48 -0400 Douglas Allan Tutty <[EMAIL PROTECTED]> wrote: > On Wed, Jul 11, 2007 at 03:49:40PM +, Robert Cates wrote: > > > > Does Etch (i386/i486) with the (standard) 2.6.18 kernel have a problem > > recognizing (some) network cards? > > > > I have a problem ever si

Re: udev at boot

On Wed, 11 Jul 2007 17:47:06 +0200 Lucio Crusca <[EMAIL PROTECTED]> wrote: > Hello *, > > I'm fighting with a problem that comes up sometimes at reboot with Etch. > Sometimes the system hangs on the message: > > "Waiting for /dev to be fully populated..." > > but some other times it works and t

compiz error, compatible Card?

rs. Well, any one can tell me if I have a NON suported Card? my card it's based on the x300 chip, well at least I have a SUPPORTED Card from the drivers, GLX_EXT_texture_from_pixmap what? on the Other Way the Direct Rendering it's working just fine. Best Regards, Orestes Leal.

Re: Opera is faster, but...

On Mon, 09 Jul 2007 21:39:41 + steef <[EMAIL PROTECTED]> wrote: > Hugo Vanwoerkom wrote: > > Hi, > > > > On an unrelated matter I installed Opera on Sid. > > > > It *is* faster than iceweasel. > > > > But because it hasn't got the ease of the adblock extension, that > > turns out to be a wash

Re: Opera is faster, but...

On Mon, 9 Jul 2007 13:05:11 -0400 Matthew K Poer <[EMAIL PROTECTED]> wrote: > On Monday 09 July 2007 1:06 pm, Hugo Vanwoerkom wrote: > > Hi, > > > > On an unrelated matter I installed Opera on Sid. > > > > It *is* faster than iceweasel. > > > > But because it hasn't got the ease of the adblock ext

Re: Ati Drivers, Xorg 7.2, Missing libfglrxdrm.a

On Mon, 09 Jul 2007 17:19:13 +0200 Jonathan Kaye <[EMAIL PROTECTED]> wrote: > Orestes leal wrote: > > > On Mon, 9 Jul 2007 08:19:55 -0400 > > Orestes leal <[EMAIL PROTECTED]> wrote: > > > >> > >> Hi folks, good day! > >> >

Re: Ati Drivers, Xorg 7.2, Missing libfglrxdrm.a

On Mon, 9 Jul 2007 08:19:55 -0400 Orestes leal <[EMAIL PROTECTED]> wrote: > > Hi folks, good day! > > Yesterday I've downloaded the latest drivers from ATI > (ati-driver-installer-8.37.6-x86.x86_64.run) for Xorg7.1 > (I have Xorg 7.2) and greater, > but after i

Ati Drivers, Xorg 7.2, Missing libfglrxdrm.a

Hi folks, good day! Yesterday I've downloaded the latest drivers from ATI (ati-driver-installer-8.37.6-x86.x86_64.run) for Xorg7.1 (I have Xorg 7.2) and greater, but after install it sucessfully and change my xorg.conf to use my new fglrx driver something freeze me, checking the log I found that

Re: fetchmail doesn't delivery to local mailboxes?

On Sun, 08 Jul 2007 11:08:23 -0700 Paul Johnson <[EMAIL PROTECTED]> wrote: > Orestes leal wrote in Article > <[EMAIL PROTECTED]> posted to > gmane.linux.debian.user: > > > Recently i've setup fetchmail to get all mail from 7 accounts (remember > > th

Re: Setting up a cron for fetchmail

On Fri, 6 Jul 2007 12:08:15 -0400 Gregory Seidman <[EMAIL PROTECTED]> wrote: > On Fri, Jul 06, 2007 at 11:59:29AM -0400, Orestes leal wrote: > > Hi Folks, i want to setting up a cron job for fetchmail that run every 1 > > minute, but today i'am so lazy that even I c

Setting up a cron for fetchmail

Hi Folks, i want to setting up a cron job for fetchmail that run every 1 minute, but today i'am so lazy that even I can't do a man page reading, any help? Best Regards, Orestes -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Keyboard as Mouse and more speed

Hi Folks, I run THIS: xmodmap -e "keysym Num_Lock = Num_Lock Pointer_EnableKeys" Then, I can work with my numeric keyboard to act as mouse, but, I want more speed that the default, any help? Best, Orestes. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Troubl

Re: How Do I Keep Track OF the Files Being Downloaded From My Apache?

> On 2 Jul., 15:40, Orestes leal <[EMAIL PROTECTED]> > wrote: > > Hi Folks: > > > > The Thing it's that I want to know, let's say in a range of 24 hours > > what files was downloaded from my apache server, firts I DO NOT have > > a proxy ser

Re: How Do I Keep Track OF the Files Being Downloaded From My Apache?

go to > http://webalizer.brokenmould.com/webalizer/ look at June/July prior ones > don't show the detail you want. > > Regards > Nick > > On 7/2/07, Orestes leal <[EMAIL PROTECTED]> wrote: > > > > Hi Folks: > > > > The Thing it's that I want t

How Do I Keep Track OF the Files Being Downloaded From My Apache?

Hi Folks: The Thing it's that I want to know, let's say in a range of 24 hours what files was downloaded from my apache server, firts I DO NOT have a proxy server, this server it's a lan server for data and docs purposes so the conection it's direct, I want to keep track to: What File Was downloa

Re: Any ksh Raw binaries Out there that work for linux i386?

ue, 26 Jun 2007 22:54:55 -0500 John Hasler <[EMAIL PROTECTED]> wrote: > > > I don´t understand what you mean by ¨raw binary¨. What´s wrong with the > > > binary in the ksh package? > > On 27.06.07 08:33, Orestes leal wrote: > > Well, I don't speak english

Re: "recovering journal" at every system boot

On Thu, 28 Jun 2007 22:57:05 + "John Smith" <[EMAIL PROTECTED]> wrote: > Everytime I boot the system, from a clean state (i.e. no power failure > or inexpected reset), the boot process stops for about 1 minute to > perform a "/dev/sdb1: recovering journal" session. > > > fsck logs this messa

Re: Kernel Header Information

On Thu, 28 Jun 2007 17:39:06 -0400 (EDT) Nirmal Govindaraju <[EMAIL PROTECTED]> wrote: > Hi, > > I am a new Linux user and I have the Debian distribution (2.6.18-4-686) > installed via the internet using a few floppy disks to perform the initial > boot up. I am now trying to install a VPN clien

Re: Eaccelerator package, where?

On Wed, 27 Jun 2007 19:18:49 +0200 Arnau <[EMAIL PROTECTED]> wrote: > Hi all!! > >Does anybody know where I can find a packaged version of > eaccelerator? I tried to install it some weeks ago following the > http://www.debianhelp.co.uk/eaccelerator.htm instruccions and it gave me > a segme

Re: Migrate kernel 2.4 to 2.6

On Wed, 27 Jun 2007 18:14:29 +0200 André Berger <[EMAIL PROTECTED]> wrote: > * Qnick (2007-06-27): > > I have a box ((Fujitsu-Siemens PRIMERGY RX300 S3) within Debian 4.0 > > "Etch" and 2.4.31 kernel . > > I very want upgrade it to kernel 2.6.21 but i don't know how do it. > > I installed kernel

The Perfect Linux gaming Box

Hi Folks, I want that some of the members of the group comments something about hard core gaming boxes under Linux, what kind of configuration I need to play *ALL* Titles and *ALL* forms of games, 3d games like Doom3, etc in linux with a performance closely like win32 and DirectX. NOTE: CPU, VGA,

Re: NTFS-3G Under 4.0

On Wed, 27 Jun 2007 10:28:29 -0500 John Hasler <[EMAIL PROTECTED]> wrote: > Aenn Seidhe Priest writes: > > Now, just how exactly could NTFS-3G (and FUSE) be installed safely and > > without breaking anything running that already depends on LibC? > > Try . > -- > John Ha

Re: Any ksh Raw binaries Out there that work for linux i386?

On Wed, 27 Jun 2007 09:59:40 -0500 John Hasler <[EMAIL PROTECTED]> wrote: > Karl E. Jorgensen writes: > > You can easily extract the raw binary out of the .deb file: > > If the other distribution is Debian-based and does not offer ksh (unlikely) > the deb should install fine. There are certa

Re: Any ksh Raw binaries Out there that work for linux i386?

On Wed, 27 Jun 2007 08:23:28 -0500 John Hasler <[EMAIL PROTECTED]> wrote: > Douglas Allan Tutty writes: > > If you install ksh on your debian box you can then run ldd on it to see > > what libraries it was compiled to require. > > Or you can just look at the dependencies: ¨Depends: libc6 (>= 2.3.

Re: Any ksh Raw binaries Out there that work for linux i386?

On Wed, 27 Jun 2007 13:13:38 +0100 "Karl E. Jorgensen" <[EMAIL PROTECTED]> wrote: > On Tue, Jun 26, 2007 at 06:39:31PM -0400, Orestes leal wrote: > > Hi folks! > > > > I need ksh (The Korn Shell), but in binary form, what site you can > > recommend me

Re: Any ksh Raw binaries Out there that work for linux i386?

On Tue, 26 Jun 2007 22:54:55 -0500 John Hasler <[EMAIL PROTECTED]> wrote: > Ore writes: > > I know that it's in the repository but I need the raw binary for 386. > > I don´t understand what you mean by ¨raw binary¨. What´s wrong with the > binary in the ksh package? > -- > John Hasler Well, I

Any ksh Raw binaries Out there that work for linux i386?

Hi folks! I need ksh (The Korn Shell), but in binary form, what site you can recommend me to download this binary version of ksh for linux i386, a web or ftp site with this file it's well accepted. NOTE: I know that it's in the repository but I need the raw binary for 386. Best, Ore. -- Orest

NeroLinux

Hi Folks! Recently i've installed NeroLinux to taste the linux version, at that moment I didn't get the key, passed a few days when I execute NeroLinux this show me a alert box that "this program has expired", so I delete the $HOME/.nero folder, reinstalled nero but this won't work, I couldn' ima

Re: How Can I Setup procmail to deliver into /var/mail[solved]

On Fri, 22 Jun 2007 10:32:36 +0530 Kumar Appaiah <[EMAIL PROTECTED]> wrote: Yeah, you right!, I make a symlink and worked, thanks for the tip, and thanks to the list an all the folks. > On Thu, Jun 21, 2007 at 05:57:11PM -0400, Orestes leal wrote: > > > Why ? Why not just make

Re: How Can I Setup procmail to deliver into /var/mail

On Thu, 21 Jun 2007 23:32:52 +0200 Håkon Alstadheim <[EMAIL PROTECTED]> wrote: > Orestes leal wrote: > > Hi Folks! > > > > I have a simple configuration that trouhg fetchmail procmail deliver all > > mail to > > /var/spool/mail, the thing it's that I

How Can I Setup procmail to deliver into /var/mail

Hi Folks! I have a simple configuration that trouhg fetchmail procmail deliver all mail to /var/spool/mail, the thing it's that I want procmail deliver all mails to /var/mail. Only that, thanks to all of you folks. Best Regards, >From Cuba. Orestes. -- Orestes <[EMAIL PROTECTED]> -- To UN

Re: setting in /etc/profile in debian

On Wed, 20 Jun 2007 16:06:57 -0700 (PDT) yong lee <[EMAIL PROTECTED]> wrote: > I thought these new entries would be effective after I > reopen a new terminal window. But it did not. I have > to manually do source /etc/profile to see the new Make the same change in ~/.bashrc, it depends on the WM

Re: Detecting disk drives from an installation script

On Wed, 20 Jun 2007 12:53:19 -0500 Hugo Vanwoerkom <[EMAIL PROTECTED]> wrote: > Michelle Konzack wrote: > > Not the best way, but it works perfectly > > > > See attached Shell-Script. > > > > This is what I have: > > [EMAIL PROTECTED]:~$ df > Filesystem 1K-blocks Used Available

Re: how to get a working .config kernel config file

On Wed, 20 Jun 2007 10:16:53 -0700 David Brodbeck <[EMAIL PROTECTED]> wrote: > > On Jun 19, 2007, at 2:59 PM, Julian De Marchi wrote: > > Try this > > > > cp /boot/.config /usr/src/linux > > > > Then when you load your kernel menu, go to load alternative config > > file. Then input the file nam

Re: Debian only sees 885.5 MiB memory

On Wed, 20 Jun 2007 19:04:32 +0200 Nigel Henry <[EMAIL PROTECTED]> wrote: > On Wednesday 20 June 2007 18:35, Orestes leal wrote: > > > > Do you use Frame-Bufer? > > > > > > Sorry. Not sure on that. Where (showing my ignorance) would I check that >

Re: Debian only sees 885.5 MiB memory

> > > > Do you use Frame-Bufer? > > Sorry. Not sure on that. Where (showing my ignorance) would I check that out? dmesg | grep framebuffer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Detecting disk drives from an installation script

On Wed, 20 Jun 2007 16:29:12 +0200 Michelle Konzack <[EMAIL PROTECTED]> wrote: > Am 2007-06-14 19:00:47, schrieb Orestes leal: > > $fdisk -l | grep dev | gawk -F' *' '{ print $1 }' | gawk -F'/dev/' '{ > > print $0 }' | grep 

Re: HP Pavilion 6360 with Debian

On Tue, 19 Jun 2007 16:30:58 -0600 Telly Williams <[EMAIL PROTECTED]> wrote: > How's everyone? > > I'm about to install Debian (with Gnome) on an HP Pavilion 6360 for > my friend's mother. The HP takes a maximum of 256MB's of ram. > Originally I was going to re-install Windows XP for her,

Re: how to get a working .config kernel config file

On Tue, 19 Jun 2007 14:54:37 -0700 (PDT) yong lee <[EMAIL PROTECTED]> wrote: Based on my experience you miss one "important" step, before do any command do a make oldconfig with your config in place in the kernel tree, answer all the questions and do a make menuconfig and the others commands, ho

Squid Problems Consumes a lot of swap and hard disk space.

Hi Folks! Time ago i've setup a squid 2.5 runngin but recently my squid consumes a lot of hard disk (more than the default storage space that i've set) and take more swap that ever, I don't know squid very much, what can be the causes to this? Ore from Cuba. -- Orestes <[EMAIL PROTECTED]> -

Re: Setting permissions to new files?

On Sun, 17 Jun 2007 18:11:02 -0300 Bruno Buys <[EMAIL PROTECTED]> wrote: Do a: chmod g+w newfile ls -lh newfile -rw-rw-r-- 1 root root 0 Jun 17 17:39 newfile Ore. > Where do I change the permissions that are set when I create a new file? > I mean, I'd like to be able to change the default pe

Re: What's this error message telling me?

On Sun, 17 Jun 2007 11:21:20 -0600 Telly Williams <[EMAIL PROTECTED]> wrote: your user doesn't have privilegies to do this, do it as root. > Here's what I get: > > [EMAIL PROTECTED]:~$ su > Password: > ephome:/home/telly# apt-get upgrade > Reading package lists... Done > Building dependency tree

Re: Postfix delay?

On Sat, 16 Jun 2007 16:15:42 -0500 Ron Johnson <[EMAIL PROTECTED]> wrote: > On 06/16/07 16:11, Orestes leal wrote: > > On Sat, 16 Jun 2007 15:49:14 -0500 > > Ron Johnson <[EMAIL PROTECTED]> wrote: > > > [snip] > >> What machine is 192.168.3.70? &g

Re: Postfix delay?

On Sat, 16 Jun 2007 15:49:14 -0500 Ron Johnson <[EMAIL PROTECTED]> wrote: > On 06/16/07 15:10, Orestes leal wrote: > > On Sat, 16 Jun 2007 14:47:23 -0500 > > Ron Johnson <[EMAIL PROTECTED]> wrote: > > > > Sorry, i was almost totally asleep! and reply like

Re: Postfix delay?

On Sat, 16 Jun 2007 14:47:23 -0500 Ron Johnson <[EMAIL PROTECTED]> wrote: Sorry, i was almost totally asleep! and reply like it's was my post of fetchmail, ups! > On 06/16/07 08:41, Orestes leal wrote: > > Hi people and good morning! > > (Please don't hi

Re: Postfix delay?

On Sat, 16 Jun 2007 14:47:23 -0500 Ron Johnson <[EMAIL PROTECTED]> wrote: I Apologies for that, sorry Ron! and all the list :( > On 06/16/07 08:41, Orestes leal wrote: > > Hi people and good morning! > > (Please don't hijack threads.) > > (Also, line forma

Postfix delay?

Hi people and good morning! The little problem it's the following, I have a small server for the lan, i've setup postfix and ran ok but every time that I or my users send an email the window of the MUA (outlook, sylphedd)client that saids 'conecting to the smtp server at IP' or something like t

Postfix delay?

Hi people and good morning! The little problem it's the following, I have a small server for the lan, i've setup postfix and ran ok but every time that I or my users send an email the window of the MUA (outlook, sylphedd)client that saids 'conecting to the smtp server at IP' or something like t

Re: fetchmail doesn't delivery to local mailboxes?

On Vie, 15 de Junio de 2007, 5:20 pm, Ismael Valladolid Torres dijo: > Orestes leal escribe: >> Recently i've setup fetchmail to get all mail from 7 accounts (remember >> that in another post was with getmail), the problem is that when >> fetchmail get the mail i

  1   2   >