On Sat, Jun 20, 2020 at 12:44 Ben Lavender wrote:
> Personally I'd learn nf_tables because that's the way forward and if you
> stick to it's CLI then the better.
>
Thanks, Ben.
-Tom
e the iptables package and install the nftables one. And I'll
look into firewalld which I tried briefly some years ago.
Thanks so much.
Cheers!
-Tom
, should I add a firewall management program like
ufw or something else? Is there something like ufw for nftables?
Thanks.
Best regards,
-Tom
:Retries=3 install
I suspect that has something to do with the apparent fact that tasksel
ignores "recommends=false" from other sources. I also suspect that
editing that line would change the behavior in the desired direction.
>From long-standing practice and inclination I have no wish to test this,
but someone else might.
I assume this would need to be done by skipping tasksel during
installation of the d-i minimal system, then altering and running the
installed tasksel after the post-install reboot.
Regards,
Tom Dial
>
On Mon, Jun 15, 2020 at 13:02 mick crane wrote:
> I think my memory has packed up.
> I thought you put the options after a hyphen with tar ?
> "tar -cfvz archive_file.tgz ./directory_to_archive"
You do for modern use, but the 'f' has to be the last arg in that
incantation.
-Tom
uld then be used to identify which
packages would be installed. In the alternative, you could capture the
output and run it in test mode, which would show fairly precisely the
effect.
Regards,
Tom Dial
> TIA
ives. Even where that is not so such a product may, as
Zoom is, be so much more widely used that it is much more useful as a
general matter.
Regards
Tom Dial
[1] https://dl.acm.org/doi/10.1145/358198.358210
>
> RLH
#deb http://security.debian.org/debian-security bullseye-security main
> contrib non-free
> Line commented out by installer because it failed to verify:
And this one
> #deb-src http://security.debian.org/debian-security bullseye-security
> main contrib non-free
(You could remove or omit the non-free and/or contrib if you don't
really need packages from those repositories).
Regards
Tom Dial
ions' laws
are different).
Cloud session storage might also be an issue, although the Debian client
session recording appears to be local when activated.
Regards,
Tom Dial
[1] Using apt install, and the absolute path, instead of dpkg, may have
helped resolve dependencies; I have seen reports to th
On 6/4/20 02:45, Sijmen J. Mulder wrote:
> Marco Möller wrote:
>>> In the fairly large number of posts in this thread I don't recall seeing
>>> file system snapshots suggested. My current preference is ZFS, which I
>>> know from experience to be up to what I understand to be the goal here.
>>
On 6/1/20 00:28, Andrei POPESCU wrote:
>On Du, 31 mai 20, 20:52:06, Tom Dial wrote:
>>
>> Moreover, ZFS is not DFSG and GPL compliant, and quite a few
>> users would avoid it because of that.
>
>ZFS is licensed under the CDDL[1], which is both free (as in fr
to be the goal here.
However, root on ZFS is a distinctly non-standard and hands on install
that is fairly straightforward and decently documented, but not for
everyone. Moreover, ZFS is not DFSG and GPL compliant, and quite a few
users would avoid it because of that.
Alternatives include LVM and btrfs, and possibly others. I have used LVM
snapshots a little, but not for this use case. It appears to have the
capability to accomplish the objective, as described in
https://linuxconfig.org/create-and-restore-manual-logical-volume-snapshots
for instance.
I have not used btrfs and therefore have no opinion about its fitness
for the case at hand.
Regards,
Tom Dial
ifies the Default profile were
changed to specify the older profile. And I suspect your missing
passwords and maybe some other things, would then be available.
I think I actually have done that, but it would be a long time back and
I do not remember why.
Regards,
Tom Dial
>
> Cheers, Gene Heskett
>
s. Unplanned
reboots seem an even worse idea inasmuch as they occasionally will
either fail or affect system function. (Updating without rebooting also
may do that, of course).
>>> Frankly the update shouldn't be allowed if your backup is actually
>>> running. So it might be safer to schedule the update and reboot if
>>> needed before the backup starts. That means one cron driven script
>>> does it all in the sequence desired.
With respect, I would run the backup first and schedule upgrades and
possible reboots to follow, and perhaps depend on success of, the backup.
Regards,
Tom Dial
>
> Cheers, Gene Heskett
>
ing, you could make an LVM physical volume on /dev/sda2 and
add it to one of the other volume groups, although both seem to have
plenty of space.
Regards
Tom Dial
>
> Yeah, that's probably what I'll do. Fortunately, it's an amd64 machine, so
> I'll be able to use GRML to do the work.
> Enjoy!
> Rick
>
es python3 which is outside the virtualenv.
Either run pip, or create the virtualenv with python3, which will
install pip3.
--
Tom Low-Shang
rom what now is present on the device. I lean
toward that rather than a file system bug.
A five month old machine should be under warranty, although I do not
know whether installing Linux would affect that. It would be worth
looking into and should offload firmware upgrade for or replacement of
the block device.
Regards,
Tom Dial
>
> Thanks in advance!
> Ralph
>
ck to the list. Thanks much for the suggestions!
The fact that the inode numbers mentioned in the initial post all are
near each other hints, to me, that the storage device is the most likely
source of difficulty. I would try
smartctl -t long
as root, or
sudo /usr/sbin/smartctl -t long
as an ordinary user authorized to use privileged commands.
(after installing the smartmontools if it is not present)
You can do that without disrupting normal processing. It may take a long
time to complete (and will tell you when you start it). After it
completes you can run
smartctl -a (or sudo /usr/sbin/smartctl -a)
and see a report that will confirm (or not) a problem,
Regards
Tom Dial
>
> Regards,
> Ralph
>
account is no longer allowed to
participate on The Register forums"), apparently for asking why he
rejected a post I thought unobjectionable and entirely compliant with
the comments guidelines.
3. I also know nothing about Discourse. Although the remarks so far in
the thread don't particularly make me want to use it, I don't find the
idea entirely abhorrent.
Tom Dial
>
> Celejar
>
desktop has two hard drives. This extra one
> had no part in the install process, I only used it later on as an
> extension to save files, I mount it manually every time I want to use
> it. I didn't see any point to partition it. I successfully mounted it in
> my recovery boot, and everything seemed to be OK at first sight.
>
> Regards,
>
> Bernard
Regards,
Tom Dial
o compensate
partly for isolation dictated by prudence in the face of a rather nasty
epidemic. So far, it installed cleanly and seems likely to be functional
and generally fit for purpose.
>
Regards
Tom Dial
On Tue, Mar 24, 2020 at 14:18 davidson wrote:
> On Mon, 23 Mar 2020, Chocolate Island Prince wrote:
>
> > This information is wowfactor 10!
Besides online help, you might check for a Linux User Group near you, e.g.,
see mine at:
https://nwflug.org
-Tom
On Fri, Feb 21, 2020 at 5:09 AM Tom Browder wrote:
>
> I am preparing servers to use with OpenSMTPD and Sympa to provide mail
and mailing list service.
...
After considering all the suggestions, I have prepared a plan, using a bit
of pseudo code, to describe what I believe I need
On Fri, Feb 21, 2020 at 11:04 AM Henning Follmann
wrote:
> On Fri, Feb 21, 2020 at 08:47:36AM -0600, Tom Browder wrote:
> > On Fri, Feb 21, 2020 at 08:37 Henning Follmann
...
> For years I operated a couple of sendmail installations. That and the
> O'Reilly Sendmail book tought me
On Fri, Feb 21, 2020 at 12:36 PM Tom Browder wrote:
> On Fri, Feb 21, 2020 at 12:05 PM Brian wrote:
> > Thanks, I will read the page in detail later. Meanwhile, I did a quick
> > search on the page for "mailname" and didn't get anything. Anyway, what
> > I really w
On Fri, Feb 21, 2020 at 12:05 PM Brian wrote:
> On Fri 21 Feb 2020 at 11:22:58 -0600, Tom Browder wrote:
>
> > On Fri, Feb 21, 2020 at 09:36 Brian wrote:
...
> Thanks, I will read the page in detail later. Meanwhile, I did a quick
> search on the page for "mailname&q
On Fri, Feb 21, 2020 at 09:36 Brian wrote:
> On Fri 21 Feb 2020 at 05:09:47 -0600, Tom Browder wrote:
>
...
| > I need to settle on names to define as the "mailname" for each the two
> > servers I will designate for the DNS MX records for all my mail-enabled
> >
an IP.
Besides the relevant RFCs, can anyone recommend a good book that covers all
this. I have a couple of the O'Reilly books on "Postfix" and "DNS and Bind"
and I am going back to refresh myself, but any other recs?
Thanks.
-Tom
On Fri, Feb 21, 2020 at 06:29 Joe wrote:
> On Fri, 21 Feb 2020 06:00:14 -0600
> Tom Browder wrote:
...
> > As I understand it, a mail server has to use smtp to physically
> > transfer mail between physical hosts and that requires one name that
> > will resolve to a
gt; accounts on their devices.
>
I'm not planning on anything at the moment but supporting mailing lists,
but you have a good point for any future expansion.
Thanks, Michael.
-Tom
On Fri, Feb 21, 2020 at 06:00 Jonas Smedegaard wrote:
> Hi tom,
>
...
> > Does anyone have strong reasons to use one over another, or any other
>
> choice?
>
...
> Depends on the purpose of the name(s).
...
Thanks, Jonas, that makes good sense. Based on that I sho
ence my original question.
-Tom
ualified domain names" (FQDNs) so
they will have names like:
+ mail.example.com
+ smtp.example.com
+ mx.example.com
Does anyone have strong reasons to use one over another, or any other
choice?
Thanks for any help.
Best regards,
-Tom
On 2/16/20 05:36, Reco wrote:
> Hi.
>
> On Sat, Feb 15, 2020 at 10:57:36PM -0700, Tom Dial wrote:
>> Neither the host nor the guest VM is rebooted often, and it is not a
>> particularly serious problem now that it's known, but it would be better
>> gone. I
o relevant documentation or other information, or
suggestions for fixing it. and wouldn't object to information about
fixing it, if anyone has encountered it previously.
Thanks
Tom Dial
On 2/13/20 14:50, Michael Stone wrote:
> On Thu, Feb 13, 2020 at 01:57:49PM -0700, Tom Dial wrote:
>> XFS is excellent, and so also is JFS.
>
> Yes on XFS, no on JFS. (XFS is very actively developed; JFS is moribund,
> has no really compelling benefits over other filesyt
linus-torvalds-zfs-statements-arent-right-heres-the-straight-dope/
[2] https://www.theregister.co.uk/2020/01/13/zfs_linux/
Regards,
Tom Dial
>
> I do not recommend btrfs and anyone who does should have a look at
> the linux-btrfs mailing list to see how many cases of data loss and
> loss of availability people have reported this month.
>
> Cheers,
> Andy
>
resses dual boot, although it would appear possible to do so
with appropriate intervention in the partitioning step. The machine I am
using now is dual boot, with Windows 10 on one disk, Debian 10
root-on-zfs on a second, and either selectable from the grub menu.
[1] https://github.com/zfsonlinux/zfs/wiki/Debian-Bust
On Wed, Feb 12, 2020 at 14:29 Greg Wooledge wrote:
> On Wed, Feb 12, 2020 at 02:26:26PM -0600, Tom Browder wrote:
> > Tixy, thanks. I did check the latest Deb 10 version but not the change
> log.
> > I was fooled by the Debian version number which looks like the BSD number
On Wed, Feb 12, 2020 at 12:13 Tixy wrote:
> On Wed, 2020-02-12 at 11:53 -0600, Tom Browder wrote:
> > I started looking in to use of OpenSMPTD for a mail server and have
> > installed it from Debian packages.
> >
> > In the process of reading a blog article
haven't received an answer
yet.
Opinions?
Thanks.
-Tom
t; (https://galaxy.ansible.com/), which is a repository of use contributed
> roles for a variety of tasks.
I have already looked at it briefly. Unfortunately I didn't find exactly
what I was looking for, but some pieces look very useful.
Thanks, Mike.
-Tom
he way to go if your laptop needs to be the "master" (I suppose
...
Thanks, Yvan, and you're right, the push mode is just what I need,
whete it be Ansible or Rex.
Cheers!
-Tom
On Tue, Feb 11, 2020 at 9:46 AM Mike Oliver wrote:
> Tom Browder writes:
...
Mike, thanks for your help. I just ordered the eBook you suggested.
And, after looking at Rex, I think I'll try the Ansible route for now
(although porting it to Raku would be an interesting project).
Cheers!
-Tom
On Tue, Feb 11, 2020 at 09:25 Dan Ritter wrote:
> Tom Browder wrote:
...
> If you have flocks of nearly identical servers in several
> flavors, you want Puppet or Chef or something similar.
>
...
> Puppet has its own language for configuration.
>
> Both take the approac
On Tue, Feb 11, 2020 at 09:38 Alex Mestiashvili
wrote:
> On 2/11/20 4:08 PM, Tom Browder wrote:
...
> > 1. If you have experience with Debian ansible, are you or were you
> > satisfied with the experience?
>
...
> I won't say much about ansible since I didn't use it long
books in print about Ansible. Can you recommend
one for an experienced sysadmin who is an Ansible newbie?
3. If you don't recommend Ansible, can you recommend any other similar
system?
Thanks.
-Tom
On Mon, Feb 3, 2020 at 2:54 PM Greg Wooledge wrote:
> On Sat, Feb 01, 2020 at 05:45:26PM +0100, Tom H wrote:
>>
>> You state that it's no longer udev that renames NICs. The following's
>> from a sid VM using svsinit+sysvrc.
> [...]
>> udev is renaming "eth0&q
On 1/28/20 03:15, Aidan Gauland wrote:
On 27/01/20 12:40 pm, Tom Dial wrote:
I can't tell whether or not this response is facetious. If it is, and
you are not determined for other reasons to use Linux, I recommend
FreeNAS
No, I was serious, but I do have limits. I've looked at FreeNAS
ll report results later after I've given this a few days.
Thank you so much Nate, Tomas, Curt, David, Byung-Hee, and Greg!
Debian folks are great!
Cheers!
-Tom
On Tue, Jan 28, 2020 at 07:36 Greg Wooledge wrote:
> On Mon, Jan 27, 2020 at 04:11:33PM -0600, Tom Browder wrote:
> > when highlighting disappears, run "xrdb /dev/null" and restart emacs
>
> So, wait. You're saying that it *works for a little while* after
> you lo
app, search for the
...
No, Curt, I didn't, but I will. I'm sorry I glossed over the point about
the dconf editor. I will try that today.
Thanks.
-Tom
like to be able to experiment with other desktops or window
managers. Can I do that and still return safely to my current setup? If so,
what do you recommend?
Best,
-Tom
On Mon, Jan 27, 2020 at 2:39 AM wrote:
> On Sun, Jan 26, 2020 at 08:04:29PM -0600, Tom Browder wrote:
> > On Sat, Jan 25, 2020 at 2:17 AM wrote:
...
>
> Have you had a look in /etc/X11/Xresources?
Yes, contents:
$ cat /etc/X11/Xresources/x11-common
! $Id$
! load color-spe
Ugh, suggestions welcome, but I'm about to give up.
Thanks for all the suggestions.
If anyone does have an .Xresources file that seems to give a
satisfactory emacs GTK under Buster I would love to get a copy to try
it.
Thanks,
-Tom
> > on the OP's machine as part of the Mate kitchen
l that I do get a boat load
of xsession errors (file ~/.xsession-errors) which I've gotten used to
over the years after getting no help from the sources I tried. And
they didn't seem to be all that detrimental to my normal usage.
I've posted those in a github gist here:
https://gist.github.com/tbrowder/1e29c8541227588c08c7764be7b859d4
Thanks.
-Tom
On Mon, Jan 27, 2020 at 07:49 Nate Bargmann wrote:
...
> At this point, I think you need to find any file on your system that has
> the Emacs X resources that xrdb showed and comment them out.
...
Good suggestion, Nate.
And thanks for your and the other folks' patience.
-Tom
On Mon, Jan 27, 2020 at 05:37 Tom Browder wrote:
> On Mon, Jan 27, 2020 at 5:00 AM Nate Bargmann wrote:
> > OP, Tom, you might try:
> >
> > grep -i "Emacs" /etc/X11/app-defaults/*
>
Would it help if I post my entire /etc/X11 directory and init.el on my
On Mon, Jan 27, 2020 at 5:00 AM Nate Bargmann wrote:
> OP, Tom, you might try:
>
> grep -i "Emacs" /etc/X11/app-defaults/*
Nothing on mine, either, Nate.
Thanks.
-Tom
K+ GUI support)
> anti-aliased fonts were well supported), I have configured Emacs the
> same in my ~/.emacs.d/init.al file:
>
> (custom-set-faces
...
Thanks, but I like a white os very light background.
-Tom
On Sat, Jan 25, 2020 at 5:01 AM Curt wrote:
...
> I guess we'll never know why unless you show us the output of
>
> xrdb -query
Sorry, to be so late, but I just did.
-Thanks.
-Tom
On Sun, Jan 26, 2020 at 5:16 PM Mike Kupfer wrote:
> Curt wrote:
> I had something similar to this happen to me with Emacs 24. I ended up
> adding an override to my ~/.emacs to set the highlighting color.
>
> Tom, which Emacs package are you using? The (default) GTK-based bui
On Sat, Jan 25, 2020 at 2:17 AM wrote:
> On Fri, Jan 24, 2020 at 04:10:37PM -0600, Tom Browder wrote:
> > I have a new laptop running Buster (with the MATE desktop) and noticed my
> > Emacs highlighted text was not showing any differently than non-highlighted
> > text. Af
ny of them.
Full disclosure: I have no connection with IXsystems other than as a
satisfied user, and have used Linux (nearly all Debian) almost
exclusively for over 25 years.
Regards,
Tom Dial
td...@acm.org
anything. I wanted to see if the mere presence of the file would affect the
situation, but apparently not.
I hope someone can suggest something to fix this problem permanently.
Thanks.
Best regards,
-Tom
On Mon, Jan 20, 2020 at 08:33 Tom Browder wrote:
> Just recently I've noticed a tremendous slow down in my normal work flow
> between two local hosts on my home wireless network. I use a Terminix app
> on an iPad to ssh into my laptop running Debian 10 Buster.
>
Please disregard,
have I
touched it with the previous laptop it replaced.
A previous query to this list when I first noticed a slight slowdown some
months ago elicited comments about rebooting the network modem but that
doesn't seem to help.
Suggestions welcome!
Thanks.
-Tom
Hello,
Recently I have installed stable on a few old optiplex workstations that
have an AMD graphics card. On first boot I always get a black screen and
have to:
1. Enable non-free
2. Install firmware-linux-nonfree. Even though the netinstall media is
firmware-10.2.0-amd64-netinst.iso
d Num lock keys.
I would like to try your suggestion if you can tell me how to actually
implement it--I am no longer familiar with the text settings for
desktop tweaks, but I am comfortable with such changes with clear
instructions.
-Tom
On Sat, Jan 18, 2020 at 3:27 AM Curt wrote:
...
> There's also apparently the 'mate-tweak' package, after installation of which
> (Preferences/Look and Feel/MATE Tweak/Enable keyboard LED).
That worked, at least I can see the position of my Caps Lock key
now--thanks, Curt!
-Tom
On Fri, Jan 17, 2020 at 20:55 Jape Person wrote:
> On 1/17/20 7:27 PM, Tom Browder wrote:
> > Is there any way to get a graphical indicator on a docking bar to show
> > their status?
> >
> I don't know whether or not gkrellm-leds would work for you.
That looks like a
I have a laptop, running Debian 10 (Buste) with the Mate desktop.
Unfortunately the laptop doesn't have light indicators on the keyboard for
keys such as: CapLock, NumLock, Insert, etc.
Is there any way to get a graphical indicator on a docking bar to show
their status?
Thanks,
-Tom
So I've got a test box that I have sid installed on and the following in my
/etc/apt/preferences
Package: *
Pin: release a=unstable
Pin-Priority: 1000
Package: *
Pin: release a=testing
Pin-Priority: 100
I also have these two packages installed:
sapt-listbugs apt-listchanges
I went to install
On Sat, Oct 26, 2019 at 12:52 deloptes wrote:
> deloptes wrote:
>
...
>
> Rebooted and voila it works.
> >
> > regards
>
> Perhaps I should write a howto as I see +1 interested
That would be great! As usual, the Devil is in the details!
Best regards,
-Tom
On Sat, Oct 19, 2019 at 11:41 john doe wrote:
> On 10/19/2019 6:07 PM, Tom Browder wrote:
> > At home I use ssh from my iPad to my local Debian Buster laptop with no
> > noticeable delay most of the time.
...
> Could be one of the following:
> - Network topology
&
On Sat, Oct 19, 2019 at 11:23 Jonas Smedegaard wrote:
> Quoting Tom Browder (2019-10-19 18:07:51)
> > At home I use ssh from my iPad to my local Debian Buster laptop with
> > no noticeable delay most of the time.
...
> If you don't have control over the gatewat router and
DSL router for her LAN and I use Cox’s standard router for
mine. I have tried a reboot of her router and service is a bit better, but
it rapidly deteriorates.
Both our systems have separate 2.4 and 5 GHz networks. I use both at home
but but I am only using 5 GHz at her house.
Thanks.
-Tom
On Sat, Oct 12, 2019 at 15:51 Tom Browder wrote:
> Has anyone on this list had any experience with Harp (https://harpjs.com)?
>
> I am having trouble getting it re-installed and not getting much help from
> the developer.
>
SUCESS (sort of)
I found a hack that works and h
Has anyone on this list had any experience with Harp (https://harpjs.com)?
I am having trouble getting it re-installed and not getting much help from
the developer.
Alternatively, can anyone recommend a suitable substitute for it.
Thanks for any help or suggestions.
Warm regards,
-Tom
On Thu, Sep 19, 2019 at 11:30 Jude DaShiell wrote:
> On Thu, 19 Sep 2019, Fred wrote:
...
>
> > Do we have our lying idiot, bag of crap, fake President to thank for
> making
> > that much worse?
>
Not all agree with you. Politics and angry speech have no place on this
list.
-Tom
) book?
Thanks.
Cheers!
-Tom
On Sat, Aug 17, 2019 at 4:12 PM Mike Kupfer wrote:
...
> IIRC, GTK3 lets the user (theme) specify the color to be used for
> selection. So something else you could experiment with (using
> emacs-gtk) is different themes.
Thanks, Mike, very helpful!
-Tom
ting
works (but other colors are changed).
Still investing.
Some progress, though, thanks a heap!
-Tom
On Wed, Aug 14, 2019 at 2:04 AM Johann Spies wrote:
...
> What does "/usr/bin/emacs --debug-init" show?
I got no messages and a normal looking blank window with a *scratch* buffer.
-Tom
blic
when I get the time.
Check out https://perl6.org for more info on the language.
Best regards,
-Tom
regards,
-Tom
le of points:
1. I had to restart the system, a mere logout didn't change anything.
2. The surprise is that it didn't actually show my user name, it
showed my real name. So security is a little better than showing my
user name; in fact, it seems better because, otherwise, folks in my
audience could see me type my user name!
Best regards,
-Tom
On Mon, Apr 1, 2019 at 10:15 Mark Fletcher wrote:
> On Sat, Mar 23, 2019 at 08:31:34AM -0500, Tom Browder wrote:
> > On Sat, Mar 23, 2019 at 5:12 AM Tom Browder
> wrote:
> > >
> > > > > Is there any reliable way to either (1) always connect via the LA
On Sat, Aug 10, 2019 at 10:00 Andrei POPESCU
wrote:
> On Sb, 10 aug 19, 09:52:48, Tom Browder wrote:
> >
> > I have tried searching for the solution but so far have found nothing.
Okay, good point. I'll try that route...
Thanks.
-Tom
memory has me entering it in the blank user name
slot!).
I have tried searching for the solution but so far have found nothing.
I have also tried "find ~/.config -exec grep -i user {} \; -print " and
found nothing that seemed worth a deeper look.
Can anyone help me?
Thanks.
Best regards,
-Tom
On Wed, Jul 10, 2019 at 18:34 songbird wrote:
> Tom Browder wrote:
> >
> > I had to use Buster RC 1 to successfully install Debian on a new laptop
> > (from Zareason) since I couldn't get Stretch stable to work.
> >
> > Now that Buster is stable, how should I pro
on this list are procedures for those who upgraded to testing
from Stretch.
Thanks.
-Tom
Perl 6 community. We welcome all to
visit <https://perl6.org> and join the fun! (We did have some server
problems recently which may have led you to think development has stalled.)
Warmest regards,
-Tom
#perl6, #perl6-dev alias: tbrowder
github: tbrowder
On Thu, May 9, 2019 at 07:35 Dan Ritter wrote:
> Tom Browder wrote:
> > My remote server hosted with Dedispec has serious problems and they have
> > offered me access via KVM.
> >
> > What do I need on my end to use that access to fix my remote host from my
&g
My remote server hosted with Dedispec has serious problems and they have
offered me access via KVM.
What do I need on my end to use that access to fix my remote host from my
home network?
All the references I see are access to VMs running on a local network.
Thanks.
-Tom
On Thu, Apr 11, 2019 at 07:02 Tom Browder wrote:
>
> I'm preparing to install Win 10 and Deb 9 on a new ZaReason laptop which has
> no installed OS on it.
Again, thanks to all who offered help.
I have my new Zareason laptop up and running! Basic specs:
UltraLap 6440 i7
Processor: i
On Fri, Apr 12, 2019 at 9:50 AM Tom Browder wrote:
>
> I have used ext4 for many years while I have been watching zfs and
...
Thanks to all who have given me advice on selecting the file system
for a new laptop. After considering all suggestions and my use of the
laptop, I have decided
has to learn
new controls in a reliable vehicle, or flying in a local home-built
experimental aircraft? ;-D
-Tom
and values his data and wants
reasonable reliability?
Thanks,
-Tom
mputer via a USB inteface.
I'm leaning toward using LVM but would appreciate any advice from LVM users.
Thanks.
Best regards,
-Tom
401 - 500 of 6195 matches
Mail list logo
