On Tue, 8 Sep 1998 [EMAIL PROTECTED] wrote:
>
> >From a dmesg on our firewall:
>
> ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker
> http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6800, IRQ 10.
> eth0: PCI NE2000 found at 0x680
>From a dmesg on our firewall:
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x6800, IRQ 10.
eth0: PCI NE2000 found at 0x6800, IRQ 10, 00:00:E8:4F:14:B7.
ne2k-pci.c: PCI NE2000 clone
On Tue, Sep 08, 1998 at 08:36:41AM +0800, Alex Kwan wrote:
> My LAN card was NE-2000 PCI (Realtek RTL-8029)
> How to set up the Command Line Argument on
> ne2k_pci module? Does anybody has this card too,
> would you please share your experience with me?
Use lspci, like this:
$ lspci
[...]
00:0b.0
I think I used the ne driver and used the arguments
io=0x300 and irq=10
These are the default values if I remeber correctly. I do recommend using
the HOWTO.
On Tue, 8 Sep 1998 [EMAIL PROTECTED] wrote:
>
> We have several of these cards, and they all installed without any
> arguments at all.
We have several of these cards, and they all installed without any
arguments at all.
Alex Kwan writes:
> My LAN card was NE-2000 PCI (Realtek RTL-8029)
> How to set up the Command Line Argument on
> ne2k_pci module? Does anybody has this card too,
> would you please share your experience wi
My LAN card was NE-2000 PCI (Realtek RTL-8029)
How to set up the Command Line Argument on
ne2k_pci module? Does anybody has this card too,
would you please share your experience with me?
Thanks
On Wed, 26 Aug 1998, Joao Paulo Figueiredo wrote:
:
: Hi,
:
: Is there any driver for my Compaq Netellingent 10/100 TX Ethernet
: card? Or, do you known if it is compatible with some other driver supported
by
: debian?
: I'm planning to install hamm...
2.0.35 kernel, Thunderlan
Hi,
Is there any driver for my Compaq Netellingent 10/100 TX Ethernet
card? Or, do you known if it is compatible with some other driver supported by
debian?
I'm planning to install hamm...
Thanks for any help,
jpf.
On Wed, Aug 26, 1998 at 10:03:01AM +0100, Nicholas Humfrey wrote:
>Has anyone got the DE-220 EtherNet Card to work with Linux ? It is a
> popular and very available card which is supposed to be ne2000 compatible
> but is obviously not 100% compatible. It has PnP support and j
Hi,
Has anyone got the DE-220 EtherNet Card to work with Linux ? It is a
popular and very available card which is supposed to be ne2000 compatible
but is obviously not 100% compatible. It has PnP support and jumperless
configuration. The HOWTO says that a lot of the ne2000 clones are not
On Wed, 12 Aug 1998, Christopher J. Morrone wrote:
> I was wondering where I should set up the configuration for my second
> ethernet card. I have two ethernet cards, both PCI and Tulip chipset,
> which are currently detected just fine during bootup.
>
> I set up the ethernet
I was wondering where I should set up the configuration for my second
ethernet card. I have two ethernet cards, both PCI and Tulip chipset,
which are currently detected just fine during bootup.
I set up the ethernet networking like normal during the Debian
installation, and it works fine. What
On Mon, 8 Jun 1998, V P REDDY wrote:
> Please provide me with D-Link DE220 Ethernet driver. It is not
> available with D-Link. They have drivers for Solaris,SCO, AT&T ports
> only.
Hm, this card is a PnP ne2000, get isapnptools to configure it and then
use the ne module at the IO address you spe
Please provide me with D-Link DE220 Ethernet driver. It is not
available with D-Link. They have drivers for Solaris,SCO, AT&T ports
only.
__
Get Your Private, Free Email at http://www.hotmail.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wi
>> I am planing on purchasing a 256k DSL to my Linux server.
>> I currently have one Ehternet card that is connected to
>> my home PC with a crossover cable. I will need to purchase
>> an additional Ethernet card for my Server to connect to the
>> DSL connection
I am planing on purchasing a 256k DSL to my Linux server.
I currently have one Ehternet card that is connected to
my home PC with a crossover cable. I will need to purchase
an additional Ethernet card for my Server to connect to the
DSL connection.
Should I purchase the cable and then completely
On Fri, May 22, 1998 at 11:45:30AM -0700, Bob Nielsen wrote:
> On Fri, 22 May 1998, Peter Paluch wrote:
> > in my school I want to install a PCI ethernet card into my Linux server
> For kernels <= 2.0.33, use the ne2000 driver (under 'other ISA'). 2.0.34
> will have
On Fri, May 22, 1998 at 08:25:27PM +0200, Peter Paluch wrote:
> in my school I want to install a PCI ethernet card into my Linux server
> box. I am not sure about it's type although I've read all manuals to it.
> It just says it is a Genius / KYE Corp. Ethernet Card which is NE2
On Fri, 22 May 1998, Peter Paluch wrote:
> Hello everybody,
>
>
> in my school I want to install a PCI ethernet card into my Linux server
> box. I am not sure about it's type although I've read all manuals to it.
> It just says it is a Genius / KYE
On 22-May-98 Peter Paluch wrote:
> in my school I want to install a PCI ethernet card into my Linux server
> box. I am not sure about it's type although I've read all manuals to it.
> It just says it is a Genius / KYE Corp. Ethernet Card which is NE2000
> compatible, I thin
> It just says it is a Genius / KYE Corp. Ethernet Card which is NE2000
> compatible, I think it is something like Genius 2500.
>
> Who can advice me which driver should I use for this card? I don't know
> which one to choose.
If if says it's NE2000 compat., use the
Hello everybody,
in my school I want to install a PCI ethernet card into my Linux server
box. I am not sure about it's type although I've read all manuals to it.
It just says it is a Genius / KYE Corp. Ethernet Card which is NE2000
compatible, I think it is something l
On Wed, 15 Apr 1998, Stellar R'espree wrote:
> Hi,
>
> I use a PC linux machine with 2 ethernet cards. (one for eth0, the other
> for eth1).
> And now, I want to add third ethernet card.
>
> It is recognized as eht2 at my machine, but when I tried to following
> com
Hi,
I use a PC linux machine with 2 ethernet cards. (one for eth0, the other
for eth1).
And now, I want to add third ethernet card.
It is recognized as eht2 at my machine, but when I tried to following
command,
/sbin/ifconfig eth2 123.123.123.123 broadcast 123.123.123.255
netmask
---Collin Rose <[EMAIL PROTECTED]> wrote:
>
>
> >: how can I install the 3c509b ethernet card on my
> >:Debian box?
> >
> >Quick answer? Use the 3c509 driver ... it's on
the modules disk.
> >
> >However, you may need to grab the 3C5X9C
On Thu, 12 Mar 1998, finn wrote:
> Well, it's not _strictly_ necessary, unless you dual boot to Win95.
> Win95 seems to get some sort of perverse pleasure out of reconfiguring
> the 3C509 every time it boots up ... and this drives Linux absolutely
> nuts (as it should).
>
> In addition, I've run
On Thu, 12 Mar 1998, Nils Rennebarth wrote:
:On Thu, Mar 12, 1998 at 04:55:08AM +0100, Remco Blaakmeer wrote:
:> On Wed, 11 Mar 1998, zhang xu wrote:
:> > how can I install the 3c509b ethernet card on my
:> > Debian box?
:>
:> The simplest approach is to use the progra
On Thu, Mar 12, 1998 at 04:55:08AM +0100, Remco Blaakmeer wrote:
> On Wed, 11 Mar 1998, zhang xu wrote:
> > how can I install the 3c509b ethernet card on my
> > Debian box?
>
> The simplest approach is to use the program "3c5x9cfg.exe" that comes with
> the
On Wed, 11 Mar 1998, zhang xu wrote:
:---Remco Blaakmeer
:<[EMAIL PROTECTED]> wrote:
:>
:> On Wed, 11 Mar 1998, zhang xu wrote:
:>
:> > hi,
:> > how can I install the 3c509b ethernet card on my
:> > Debian box?
:>
:> The simplest approach is to use the
---Remco Blaakmeer
<[EMAIL PROTECTED]> wrote:
>
> On Wed, 11 Mar 1998, zhang xu wrote:
>
> > hi,
> > how can I install the 3c509b ethernet card on my
> > Debian box?
>
> The simplest approach is to use the program
"3c5x9cfg.exe" that co
On Wed, 11 Mar 1998, zhang xu wrote:
> hi,
> how can I install the 3c509b ethernet card on my
> Debian box?
The simplest approach is to use the program "3c5x9cfg.exe" that comes with
the DOS drivers to disable PnP support and then use the standard driver
for this card
On Wed, 11 Mar 1998, zhang xu wrote:
:hi,
: how can I install the 3c509b ethernet card on my
:Debian box?
Quick answer? Use the 3c509 driver ... it's on the modules disk.
However, you may need to grab the 3C5X9CFG.EXE utility from the 3com
website (www.3com.com) and reconfigure the NIC
hi,
how can I install the 3c509b ethernet card on my
Debian box?
_
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
--
E-mail the word "unsubscribe" to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MA
Jonas Bofjall <[EMAIL PROTECTED]> writes:
> Now I can't get networking to actually work. I can't ping anything except
> the loopback (127.0.0.1) and my own IP address. Does the latter mean that
> my network card works or does the packet never leave the machine?
It could be a configuration error.
ate the actual problem? (I mean: how do I find out
> if the hardware is malfunctioning, if the module doesn't work with my card
> or if there's a configuration problem?)
If you have the original disk available for the ethernet card, they
usually have a ms-dos based configuration ut
I have decided to install something unixish on an old 486/33 which just
sits in the lab, which has a crashed MSwin311 installation and no one uses
it. I don't have much info on hardware but I've figured out most of it. The
network card has `SMC' printed on it so I choose the first SMC driver (I
thi
On Wed, Feb 11, 1998 at 10:57:29AM +0100, Florian Attenberger wrote:
> I think the /etc/init.d/* files where not updated, when I updated to
> debian 2.0 (The files are still looking for rpc.portmap instead of
> portmap, as its name is in the new release
>
> Maybe the new network packeges should ca
On Wed, 11 Feb 1998, Hamish Moffatt wrote:
> On Wed, Feb 11, 1998 at 02:51:58AM +0100, Florian
> Attenbergerhphalle0.informatik.tu-muenchen.de wrote:
> > My "rpc.portmap" is away (/usr/sbin/rpc.portmap) and I don't know, why.
> > What is its use??
> > How can I get it again?
> >
> > I have n
tmap DID
exist.
Then I updated completely to the unstable release and noticed that it was
away
(BTW: I`ve installed the network packages).
My ethernet card driver seems to be correctly installed.
At bootup there are some error-messages, saying, that network service was
not available.
I can
"Florian Attenbergerhphalle0.informatik.tu-muenchen.de" <[EMAIL PROTECTED]>
writes:
> My "rpc.portmap" is away (/usr/sbin/rpc.portmap) and I don't know, why.
> What is its use??
> How can I get it again?
rpc.portmap moved to portmap recently in unstable. It's generally
only used for NFS on
On Wed, Feb 11, 1998 at 02:51:58AM +0100, Florian
Attenbergerhphalle0.informatik.tu-muenchen.de wrote:
> My "rpc.portmap" is away (/usr/sbin/rpc.portmap) and I don't know, why.
> What is its use??
> How can I get it again?
>
> I have no /dev/eth0:
> Because the CARD is not correct installed??
Hi,
My "rpc.portmap" is away (/usr/sbin/rpc.portmap) and I don't know, why.
What is its use??
How can I get it again?
I have no /dev/eth0:
Because the CARD is not correct installed
or
Do I have to create this file??(with mknod??)
thanx so much
florian attenberger
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
At 09:23 -0600 on 2/2/98, Nathan E Norman wrote:
> On Fri, 30 Jan 1998, Butch Kemper wrote:
>
> :
> : I have a Compaq Deskpro 2000 that has an ethernet card that Windows NT
> : identifies as "Netelligent 10/100 TX PCI UTP Bus 0&q
Last version of TLAN driver should be 0.39. Working very smoothly for me
here (but I know there are still a few problematic models - just
download the tar file and read the README.
There is also a TLAN mailing list (low volume) : send "subscribe" to
[EMAIL PROTECTED]
Hope this helps.
Ph. A.
--
On Fri, 30 Jan 1998, Butch Kemper wrote:
:
: I have a Compaq Deskpro 2000 that has an ethernet card that Windows NT
: identifies as "Netelligent 10/100 TX PCI UTP Bus 0". The card has a big
: chip on it that is marked as "ti Tlan Chip TNETE100APCM E303W-7BAF2TW" but
: th
I have a Compaq Deskpro 2000 that has an ethernet card that Windows NT
identifies as "Netelligent 10/100 TX PCI UTP Bus 0". The card has a big
chip on it that is marked as "ti Tlan Chip TNETE100APCM E303W-7BAF2TW" but
that didn't give me a clue.
I am trying to instal
You can use the 3c59x driver for this card.
Rob wrote:
> Hi All,
>
> I'm new to this, just installed debian Linux from the CD for the first
> time yesterday. During the installation, it prompted me for my Ethernet
> Card type. Unfortunately, I have the type of card listed i
Hi All,
I'm new to this, just installed debian Linux from the CD for the first
time yesterday. During the installation, it prompted me for my Ethernet
Card type. Unfortunately, I have the type of card listed in the subject
line, and this card was not in the list of available options. Does
a
Is there such a thing? I have a PCI card from KTI networks, but I can't
make it work with any of the existing drivers, the tech rep thinks the
card has it's own interface (not cloning a more common card), and the
engineer who was supposedly going to get in touch with me hasn't.
Also, why does al
I am looking for help in getting a SMC 8416 ethernet card in a Dell
433/l machine. I have tried to use the SMC ultra and SMC 9000 modules
to get it to work on install. I need the network card to work since
this machine does not have a CD-ROM in it and I need to get the
On 12 Sep 1997, Dale Martin wrote:
> The other card I see mentioned a lot, but never see much as far as
> recommendations, is the Intel EtherExpress 100. Anyone have any
> thoughts on those?
I have the "Intel EtherExpress 100 Pro", which is different from the
regular one (requires a driver that
Raymond A. Ingles wrote:
> How does one determine from minimal catalog info what cards are
> Tulip-based? I've been trying to figure that out for a while...
Jeff Noxon wrote:
> They use the DEC 2104x (10 Mb/s) or 2114x (100 Mb/s) chips. Just look
> at the card or the specs on the box. DEC,
On Mon, 15 Sep 1997, Fredrik Ax wrote:
>> The other card I see mentioned a lot, but never see much as far as
>> recommendations, is the Intel EtherExpress 100. Anyone have any
>> thoughts on those?
>
>I'm using an EtherExpress 100 together with Linux. The only problem
>I've had, was finding the d
On Mon, Sep 15, 1997 at 01:02:55PM -0400, Raymond A. Ingles wrote:
> How does one determine from minimal catalog info what cards are
> Tulip-based? I've been trying to figure that out for a while...
They use the DEC 2104x (10 Mb/s) or 2114x (100 Mb/s) chips. Just look
at the card or the specs
On Fri, 12 Sep 1997, Jeff Noxon wrote:
> On Fri, Sep 12, 1997 at 01:09:24PM -0400, Dale Martin wrote:
> > The current wisdom says to avoid the 3com 3c905, and go with a DEC
> > "Tulip" based card. I do know from personal experience that the 3c905
> > has problems - haven't tried a Tulip card yet,
On 12 Sep 1997, Dale Martin wrote:
> Leszek Gerwatowski <[EMAIL PROTECTED]> writes:
>
> The other card I see mentioned a lot, but never see much as far as
> recommendations, is the Intel EtherExpress 100. Anyone have any
> thoughts on those?
>
I'm using an EtherExpress 100 together with Linux.
On Fri, Sep 12, 1997 at 01:09:24PM -0400, Dale Martin wrote:
> The current wisdom says to avoid the 3com 3c905, and go with a DEC
> "Tulip" based card. I do know from personal experience that the 3c905
> has problems - haven't tried a Tulip card yet, but will be using one
> very soon.
The Tulip c
Leszek Gerwatowski <[EMAIL PROTECTED]> writes:
> Hi!
>
> Can anyone tell me which 100MB Ethernet Card is best for Debian (driver
> quality, stability, support and also performance)? I'm planning to switch
> to 100MB Ethernet Network and want to be shure that my ne
On Sep 12, Jean Pierre LeJacq wrote
> On Fri, 12 Sep 1997, Leszek Gerwatowski wrote:
>
> > Can anyone tell me which 100MB Ethernet Card is best for Debian (driver
> > quality, stability, support and also performance)? I'm planning to switch
> > to 100MB Ethernet Netw
On Fri, 12 Sep 1997, Leszek Gerwatowski wrote:
> Can anyone tell me which 100MB Ethernet Card is best for Debian (driver
> quality, stability, support and also performance)? I'm planning to switch
> to 100MB Ethernet Network and want to be shure that my new network card
> will
Hi!
Can anyone tell me which 100MB Ethernet Card is best for Debian (driver
quality, stability, support and also performance)? I'm planning to switch
to 100MB Ethernet Network and want to be shure that my new network card
will work without any problems.
Thanks in ad
Paul Ryan Kuykendall wrote:
>
> I just installed Debian 1.3.1 on my machine, but for some strange reason I
> can't get my net card out of promiscuous mode. Would anyone know where
> I might configure promisc mode off? Thank you.
ifconfig eth0 -promisc
regards
Terry
--
TO UNSUBSCRIBE FROM THI
On Sep 6, Carey Evans wrote
>
> % ifconfig eth0 -promisc
>
> But your card shouldn't come up in promiscuous mode, so you should
> still try to find out what put it in promiscous mode in the first
> place. (Something like netacct, tcpdump, statnet, etc.)
>
Thank you for the assistance. I am now
On 6 Sep 1997, Carey Evans wrote:
> Paul Ryan Kuykendall <[EMAIL PROTECTED]> writes:
>
> > I just installed Debian 1.3.1 on my machine, but for some strange reason I
> > can't get my net card out of promiscuous mode. Would anyone know where
> > I might configure promisc mode off? Thank you.
>
Paul Ryan Kuykendall <[EMAIL PROTECTED]> writes:
> I just installed Debian 1.3.1 on my machine, but for some strange reason I
> can't get my net card out of promiscuous mode. Would anyone know where
> I might configure promisc mode off? Thank you.
% ifconfig eth0 -promisc
But your card shouldn
I just installed Debian 1.3.1 on my machine, but for some strange reason I
can't get my net card out of promiscuous mode. Would anyone know where
I might configure promisc mode off? Thank you.
Paul Kuykendall
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubsc
I've had extremely good luck with the Kingston Tulip based cards.
They're fairly cheap ($50 or so for 10mb, $90 or so for 100mb),
and i've found them to be very fast, reliable, and well-supported
by Linux.
The 10mb card is a combo card (aui, utp, coax all on one card).
Simon Karpen
[EMAIL PR
Tomorrow we're moving our company server machine to a new ISP.
Right now it has a UTP SMC 8216 Ultra in it, but the new
ISP only has coax (:-(), and we're not too sure what to do
about an ethernet card. We would like to spend a little
bit more than just a PCI NE2000 and get something
On Tue, 2 Sep 1997, Mirek Kwasniak wrote:
>
> I haved two 3c509.
> 1)To run with both you must compile driver into kernel (not
> as module).
though mine is a different model (3C590), I had no problem with
modules. I have 3 (three) 3C590, with ip-masq, compiled as module,
which are detected w/
> I have recompiled the kernel to support IP forwarding. One of two 3C509
> Cards that I have on my machine works. What is required to get my second
> Ethernet Card working?
> I have tried to add the append="ether=11,0x320.eth1" statement to
> lilo.conf but it doesn&
ired to get my second
> Ethernet Card working?
> I have tried to add the append="ether=11,0x320.eth1" statement to
> lilo.conf but it doesn't make it work. Any ideas?
>
> Thanks,
> Drazen
>
>
> --
> TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word &q
D]) wrote:
>
> > I have recompiled the kernel to support IP forwarding. One of two 3C509
> > Cards that I have on my machine works. What is required to get my second
> > Ethernet Card working?
> > I have tried to add the append="ether=11,0x320.eth1" statement
esdis.gsfc.nasa.gov/linux/drivers/3c509.c
// Heikki
Drazen Lalovic wrote:
>
> THANK YOU FOR YOUR HELP. DO YOU KNOW THE PATCH NAME?
>
> THANKS,
> DRAZEN
> --
>From: Philippe Troin
>To: Lalovic, Drazen
>Subject: Re: Second Ethernet Card
>Date: Thursday, June 26,
THANK YOU FOR YOUR HELP. DO YOU KNOW THE PATCH NAME?
THANKS,
DRAZEN
--
From: Philippe Troin
To: Lalovic, Drazen
Subject: Re: Second Ethernet Card
Date: Thursday, June 26, 1997 3:45PM
On Thu, 26 Jun 1997 14:12:00 EDT "Lalovic, Drazen"
([EMAIL PROTECTED]) wrote:
> I have r
THANK YOU FOR YOUR HELP. DO YOU KNOW THE PATCH NAME?
THANKS,
DRAZEN
--
From: Philippe Troin
To: Lalovic, Drazen
Subject: Re: Second Ethernet Card
Date: Thursday, June 26, 1997 3:45PM
On Thu, 26 Jun 1997 14:12:00 EDT "Lalovic, Drazen"
([EMAIL PROTECTED]) wrote:
> I have r
On Thu, 26 Jun 1997, Lalovic, Drazen wrote:
: I have recompiled the kernel to support IP forwarding. One of two 3C509
: Cards that I have on my machine works. What is required to get my second
: Ethernet Card working?
: I have tried to add the append="ether=11,0x320.eth1" st
On Thu, 26 Jun 1997 14:12:00 EDT "Lalovic, Drazen"
([EMAIL PROTECTED]) wrote:
> I have recompiled the kernel to support IP forwarding. One of two 3C509
> Cards that I have on my machine works. What is required to get my second
> Ethernet Card working?
> I have tried to
I have recompiled the kernel to support IP forwarding. One of two 3C509
Cards that I have on my machine works. What is required to get my second
Ethernet Card working?
I have tried to add the append="ether=11,0x320.eth1" statement to
lilo.conf but it doesn't make it work. Any
On Sat, 14 Jun 1997, Hamish Moffatt wrote:
:On Thu, Jun 12, 1997 at 04:39:53PM +0200, [EMAIL PROTECTED] wrote:
:> When I rebooted to linux I noticed several network error
[snip]
:> configuration tool (grrr...). The second case (1.2, Apr 97)
:
:> Am I the only one with such an expirience? I shoul
Joost writes:
> I think that it is however possible to fry hardware with linux: while
> trying 1.3 I inserted a wrong module for the cdrom interface and it fried
> the cdrom drive.
IMHO anything that can be truly "fried" in this way (that is, physically
damaged) is broken as designed.
John Hasler
On Fri, 13 Jun 1997, Jason Gunthorpe wrote:
> On Thu, 12 Jun 1997, Bruce Perens wrote:
>
> > fit in the kernel. If you can tell me about the I/O ports of your network
> > card we can give you magic words to put on the boot command line for that
> > device that reserve its ports and prevent othe
On Thu, Jun 12, 1997 at 04:39:53PM +0200, [EMAIL PROTECTED] wrote:
> When I rebooted to linux I noticed several network error
> messages, and ping showed "Network is unreachable".
> Apparently the rescue disk had confused my WD8013 ethernet
> card. Then I booted do DOS -
The EEPROM getting scrambled is a result of drivers probing for devices
on the bus that don't happen to be there, and hitting the network card
instead. This happens more with the rescue disk than with a custom kernel
because the rescue disk is built for every scsi and ethernet card we could
f
he rescue disk is built for every scsi and ethernet card we could
> fit in the kernel. If you can tell me about the I/O ports of your network
> card we can give you magic words to put on the boot command line for that
> device that reserve its ports and prevent other drivers from touching the
On Thu, 12 Jun 1997, Lee Bradshaw wrote:
> I had a similar problem with tcpdump. After I saw it referenced in a
> message here I decided to see what kind of info it would print out. The
> info on my card (3C509) looked correct, but after running tcpdump, I
> couldn't connect to any other machi
I had a similar problem with tcpdump. After I saw it referenced in a
message here I decided to see what kind of info it would print out. The
info on my card (3C509) looked correct, but after running tcpdump, I
couldn't connect to any other machines. The light on my hub indicated
the card wasn't
my partitions, got a shell
and did some repair. All went well :-)
When I rebooted to linux I noticed several network error
messages, and ping showed "Network is unreachable".
Apparently the rescue disk had confused my WD8013 ethernet
card. Then I booted do DOS -- and it complety hang aft
On Fri, 16 May 1997, Harmon Sequoya Nine wrote:
> Also, does anyone know what website to check out to get a list
> of drivers available for Linux or a list of devices supported
> by the 2.1.** kernel?
Check http://www.linuxhq.com/ for info about the Linux kernel.
--
Nicolás Lichtmaier.-
[EMAIL
> Apparently, Linux doesn't have a driver for the Intel 82557-based PCI
> twisted-pair ethernet card. It looks as thought this is not the same
> as the EtherExpress Pro/10+ because it uses a different chip (the 82557).
> Does Linux 2.1.** have such a driver?
This is the Pro100B
Thanks for the response on LINUX SUPPORT FOR CABLE MODEMS?
Apparently, Linux doesn't have a driver for the Intel 82557-based PCI
twisted-pair ethernet card. It looks as thought this is not the same
as the EtherExpress Pro/10+ because it uses a different chip (the 82557).
Does Linux 2.1.**
lt;[EMAIL PROTECTED]>
:> To: Chris Brown <[EMAIL PROTECTED]>
:> Cc: debian-user@lists.debian.org
:> Subject: Re: Selecting a pci ethernet card.
:> Resent-Date: Sat, 3 May 1997 13:54:26 -0400
:> Resent-From: debian-user@lists.debian.org
:>
:> We use a 3com 3c905TX 10/100
)
> From: Nathan E Norman <[EMAIL PROTECTED]>
> To: Chris Brown <[EMAIL PROTECTED]>
> Cc: debian-user@lists.debian.org
> Subject: Re: Selecting a pci ethernet card.
> Resent-Date: Sat, 3 May 1997 13:54:26 -0400
> Resent-From: debian-user@lists.debian.org
>
> We us
We use a 3com 3c905TX 10/100 Mbps PCI card, and it performs quite well,
thanks to Donald Becker's wonderful drivers. I believe it uses the
"3c590 Vortex" driver in the kernel. I had no problems installing
Debian 1.2 on the machine straight out of the box. We've never had any
errors or strange be
Very shortly I need to get an order in for new server parts one
of the things that I haven't dealt with before is pci bus ethernet
cards. Which cards and drivers are the most stable and which the
best performing? Most reliable is probably more important.
--
TO UNSUBSCRIBE FROM THIS MA
I've used the Linksys EC2T successfully.
--
Jean Pierre
On Thu, 1 May 1997 [EMAIL PROTECTED] wrote:
> I am looking for recommendations for a
> PCMCIA ethernet card with both thinnet and
> 10bt and a modest price tag.
> This only need work with linux.
--
TO UNSUBSCRIBE
On Thu, 1 May 1997 [EMAIL PROTECTED] wrote:
>
> I am looking for recommendations for a
> PCMCIA ethernet card with both thinnet and
> 10bt and a modest price tag.
> This only need work with linux.
I have been using an NDC Instant link which cost about $100 at Elek-Tek.
A wor
I am looking for recommendations for a
PCMCIA ethernet card with both thinnet and
10bt and a modest price tag.
This only need work with linux.
rob
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail
[EMAIL PROTECTED] wrote:
>
> Hello everyone,
>
> I am getting "eth0:mismatched read page pointers 0 vs 1" when I ifconfig eth0
> "online" and this continues until I ifconfig eth0 down. These are continous
> and repeated errors to console. I have an SMC 8416T at port 220 and interupt
> 10 (both
Hello everyone,
I am getting "eth0:mismatched read page pointers 0 vs 1" when I ifconfig eth0
"online" and this continues until I ifconfig eth0 down. These are continous
and repeated errors to console. I have an SMC 8416T at port 220 and interupt
10 (both of these values are correctly autoprobe
501 - 600 of 628 matches
Mail list logo