On 11/05/2024 10:09, Jeffrey Walton wrote:
On Fri, May 10, 2024 at 11:18 AM Max Nikulin wrote:
I am not trying to dispute your suggestion, I had a hope to get a data
point with a success story.
In 2006 I was doing sysadmin work for the Nuclear Energy Institute. NEI
performed a
On Fri, May 10, 2024 at 11:18 AM Max Nikulin wrote:
> On 10/05/2024 22:09, Jeffrey Walton wrote:
> > On Fri, May 10, 2024 at 11:05 AM Max Nikulin wrote:
> > On 10/05/2024 06:07, Jeffrey Walton wrote:
> > > On Thu, May 9, 2024 at 5:44 PM Unni wrote:
> > > [ 278.360447] iwlwifi
On 10/05/2024 22:09, Jeffrey Walton wrote:
On Fri, May 10, 2024 at 11:05 AM Max Nikulin wrote:
On 10/05/2024 06:07, Jeffrey Walton wrote:
> On Thu, May 9, 2024 at 5:44 PM Unni wrote:
> [ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
> Restarting 0x0.
On Fri, May 10, 2024 at 11:05 AM Max Nikulin wrote:
> On 10/05/2024 06:07, Jeffrey Walton wrote:
> > On Thu, May 9, 2024 at 5:44 PM Unni wrote:
> > [ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
> > Restarting 0x0.
> > [ 278.360571] iwlwifi :09:00.0: Loaded
On 10/05/2024 06:07, Jeffrey Walton wrote:
On Thu, May 9, 2024 at 5:44 PM Unni wrote:
[ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
Restarting 0x0.
[ 278.360571] iwlwifi :09:00.0: Loaded firmware version:
72.daa05125.0 cc-a0-72.ucode
[...]
Install the
On Thu, May 9, 2024 at 5:44 PM Unni wrote:
> Hello,
>
> Wifi is getting disconnected randomly on debian. dmesg shows
>
>
> --
>
> [ 278.360346] iwlwifi :09:00.0: Queue 5 is stuck 8 21
> [ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
> R
Hello,
Wifi is getting disconnected randomly on debian. dmesg shows
--
[ 278.360346] iwlwifi :09:00.0: Queue 5 is stuck 8 21
[ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
Restarting 0x0.
[ 278.360566] iwlwifi :09:00.0: Start IWL Error Log Dump:
[ 278.360568
Anders Andersson wrote:
> I like old PCMCIA cards, and would like to get a serial card to work
> on a Thinkpad X40 running Debian 12.5.
>
> The card is just called "Serial I/O PC Card" and should be physically
> and electrically compatible, 3.3V/5V, 16 bit. I think it is this:
>
Anders Andersson writes:
> When I searched for "spectrum_cs" and "orinico" I got a lot of results
> for some PC Card WLAN interface, which isn't right. Does anyone
> recognize this? It should have a bog-standard 16550 compatible UART
> and PCMCIA is more or less an ISA bus so I did not foresee
I like old PCMCIA cards, and would like to get a serial card to work
on a Thinkpad X40 running Debian 12.5.
The card is just called "Serial I/O PC Card" and should be physically
and electrically compatible, 3.3V/5V, 16 bit. I think it is this:
On Sat, Jan 27, 2024 at 02:31:07PM -0500, Dotfiles wrote:
> >
> > Debian always does this with configuration files.
> >
>
> OK, thanks. I’ve seen those prompts before with other config files but I
> wasn’t sure if it also happened with zsh. But it sounds like this is standard
> behavior for
>
> Debian always does this with configuration files.
>
OK, thanks. I’ve seen those prompts before with other config files but I wasn’t
sure if it also happened with zsh. But it sounds like this is standard behavior
for all config files. Good to know.
On Sat, Jan 27, 2024 at 01:56:57PM -0500, Dotfiles wrote:
> If I make changes to the config files in /etc/zsh, do I have to worry about
> them getting overwritten if I do an upgrade to the next major Debian release?
If that release comes with a new config file, you will be
asked at instal
If I make changes to the config files in /etc/zsh, do I have to worry about
them getting overwritten if I do an upgrade to the next major Debian release?
Hi,
please ignore the previous message
It seems that upgrading from 6-0-1 to 6-0-5 fix the problem (that or
autoremove)
regards,
Laurent
Le dim. 17 déc. 2023 à 10:44, Laurent Debian a
écrit :
> Dear All,
> I am running debian Testing,
> I did two things recently, upgrading the debian and
> For the curious, I occasionally need to run Microchip MPLAB, the old
> pre-Java version which doesn't do Linux. It only just about does
> Windows... I used to think Serif software was buggy until I tried
> Microchip stuff.
Setting it up might take some work (especially if you need it to have
On 9/3/23 08:24, Carl Fink wrote:
Hi,
So I finally found a scripted way to get SD going on my PC using venv.
It works, but it complains about not being able to use the GPU via CUDA.
This ASUS PN53 has a Radeon 600M GPU. Any suggestions on actually
being able to use it for AI?
Aha.
Hi,
So I finally found a scripted way to get SD going on my PC using venv.
It works, but it complains about not being able to use the GPU via CUDA.
This ASUS PN53 has a Radeon 600M GPU. Any suggestions on actually being
able to use it for AI?
Thanks.
-Carl Fink
. Wifi getting disconnected randomly and I've
to access gnome network manager and disable/enable wifi to get it
working. The log shows some module/kernel crash.
full log at http://paste.debian.net/hidden/72a8bc0c/
--
2023-07-13T20:42:02.872844+05:30 unni-debian
google-chrome.desktop[3048
around here)
> Weitergeleitete Nachricht
> Betreff: Upgrade Bullseye to Bookworm, and getting of rid of systemd?
> Datum: Wed, 21 Jun 2023 12:04:09 +0100
> Von: Ottavio Caruso
> An: debian-init-diversity@
>
> Is it at least theoretically possible to upgrade (as opposite to
> in
that messed it up. Once I added the new
section to the sources, things worked again.
The symptoms I'm getting are the same as what it used to display when
I tried to use sddm to start the desktop. Gdm3 and lightdm both worked
in the past but now I'm getting the same symptom with all of them
Share with the Debian community
the X server logs of "Debian" and "systemrescuecd".
Groeten
Geert Stappers
First is the log from a session that failed. Below is a log from a
previous session that worked. Sorry, didn't get one from a
systemrescuecd session - I thought I'd copied it to a
On Mon, May 22, 2023 at 12:36 AM wrote:
> On Sun, May 21, 2023 at 03:16:56PM -0400, Gary Dale wrote:
>
> [...]
>
> > I purged lightdm, rebooted and re-installed it but got the same errors.
> >
> > I don't believe this is a problem with lightdm because it is also
> happening
> > with gdm3 and
On Sun, May 21, 2023 at 03:16:56PM -0400, Gary Dale wrote:
[...]
> I purged lightdm, rebooted and re-installed it but got the same errors.
>
> I don't believe this is a problem with lightdm because it is also happening
> with gdm3 and sddm [...]
Right: most probably it is the X server failing.
since I last updated it. I had trouble the previous time I'd
> > updated it too, but that was the move to the non-free-firmware section
> > that messed it up. Once I added the new section to the sources, things
> > worked again.
> >
> > The symptoms I'm getting are the
that messed it up. Once I added the new
section to the sources, things worked again.
The symptoms I'm getting are the same as what it used to display when
I tried to use sddm to start the desktop. Gdm3 and lightdm both worked
in the past but now I'm getting the same symptom with all of them
section to the sources, things
worked again.
The symptoms I'm getting are the same as what it used to display when I
tried to use sddm to start the desktop. Gdm3 and lightdm both worked in
the past but now I'm getting the same symptom with all of them - a blank
screen with a cursor flashing
Aren Vardhan wrote:
> It worked, thanks a lot for your help.
>
> Can you also help me in installing the Damask software in My debian
> OS. I am not able locate the package through the sudoers.
If you mean https://damask.mpie.de/ then a quick look at
It worked, thanks a lot for your help.
Can you also help me in installing the Damask software in My debian OS. I
am not able locate the package through the sudoers.
On Sun, Apr 9, 2023, 16:19 Timothy M Butterworth <
timothy.m.butterwo...@gmail.com> wrote:
>
>
> On Sun, Apr 9, 2023 at 6:39 AM
Aren Vardhan wrote:
> Hello, I am Aren Vardhan, a Graduate Student. I am reaching
> out to you to help me with the User Access. I recently
> installed the Debian 11 Operating System for a project
> purpose. I want to get permitted the Admin Rights to my
> system so that I can install the Damask
On Sun, Apr 9, 2023 at 6:39 AM Aren Vardhan
wrote:
> Hello, I am Aren Vardhan, a Graduate Student. I am reaching out to you to
> help me with the User Access. I recently installed the Debian 11 Operating
> System for a project purpose. I want to get permitted the Admin Rights to
> my system so
Aren Vardhan (12023-04-09):
> Hello, I am Aren Vardhan, a Graduate Student. I am reaching out to you to
> help me with the User Access. I recently installed the Debian 11 Operating
> System for a project purpose. I want to get permitted the Admin Rights to
> my system so that I can install the
Hello, I am Aren Vardhan, a Graduate Student. I am reaching out to you to
help me with the User Access. I recently installed the Debian 11 Operating
System for a project purpose. I want to get permitted the Admin Rights to
my system so that I can install the Damask software using Sudo commands.
Hello again:
I'm just getting around to firing up my new laptop (Lenovo X1 Carbon Gen
10), which came with Ubuntu installed. (By the way, I appreciate all of the
feedback I got.) Although Ubuntu is a Debian-derivative, I didn't much care
for the feel of it. This is entirely subjective, I realize
On Tue, Jan 17, 2023 at 21:27 David wrote:
...
> On Wed, 18 Jan 2023 at 10:39, Tom Browder wrote:
>> On Tue, Jan 17, 2023 at 10:06 Tom Browder wrote:
>>> In a previous thread you fellow Debianites gave me excellent advice on
>>> running Windows on a VM
>>> running on a Debian host. Now I have
On Wed, 18 Jan 2023 at 10:39, Tom Browder wrote:
> On Tue, Jan 17, 2023 at 10:06 Tom Browder wrote:
>> In a previous thread you fellow Debianites gave me excellent advice on
>> running Windows on a VM running on a Debian host. Now I have my shiny new
>> Debian Silent PC host quietly waiting.
On Tue, Jan 17, 2023 at 17:38 Tom Browder wrote:
.,,
> I've followed the instructions from the Debian wiki, fired up
> virt-manager, and got this warning:
>
> KVM is not available. This may mean the KVM package is not installed
> or the KVM kernel modules are not loaded.
>
And it seems
On Tue, Jan 17, 2023 at 10:06 Tom Browder wrote:
> In a previous thread you fellow Debianites gave me excellent advice on
> running Windows on a VM running on a Debian host. Now I have my shiny new
> Debian Silent PC host quietly waiting.
I've followed the instructions from the Debian wiki,
In a previous thread you fellow Debianites gave me excellent advice on
running Windows on a VM running on a Debian host. Now I have my shiny new
Debian Silent PC host quietly waiting.
I intend to try to copy data from the old Win box via the network but, if
that doesn't work, can I do this:
Take
log size 0 is invalid
> > thunderbolt 0-0: reading DROM failed
> > BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
> > Enter 'help' for list of built-in commans.
> > (initramsfs) _
> >
> > I tried it multiple times, including first formatting the USB as a F
Greg Wooledge writes:
> However, if a newer X server, Mesa or whatever else is also needed, then
> it might be worth trying to run testing.
Indeed. I've run into trouble with backports kernels since apparently
the kernel team doesn't give a damn about what other packages break with
an updated
On Mon, Dec 05, 2022 at 07:45:52PM -0500, Timothy M Butterworth wrote:
> According to: https://ubuntu.com/certified/202204-30215
>
> This system was tested with 20.04 LTS, running the 5.14.0-1033-oem kernel.
>
> If you got the X1 Carbon Gen 10 then you will likely need to install
> Debian
On Mon, Dec 5, 2022 at 4:32 PM Andrew M.A. Cater
wrote:
> On Sun, Dec 04, 2022 at 09:51:49PM -0500, Patrick Wiseman wrote:
> > Hello, fellow Debian users:
> >
> > I've had Debian on my computers for a very long time (can't remember
> > exactly when but early 2000's for sure); and I've had Lenovo
On Sun, Dec 4, 2022 at 9:52 PM Patrick Wiseman wrote:
>
> ... And, although I'm a rare participant on this list, I enjoy the lurk and
> would presumably need to go elsewhere if I had questions about my Ubuntu
> experience.
Ubuntu-users (https://lists.ubuntu.com/mailman/listinfo/ubuntu-users)
On Sun, Dec 04, 2022 at 09:51:49PM -0500, Patrick Wiseman wrote:
> Hello, fellow Debian users:
>
> I've had Debian on my computers for a very long time (can't remember
> exactly when but early 2000's for sure); and I've had Lenovo laptops for
> ages too. I finally need to replace my main laptop
On 05/12/2022 22:59, Linux-Fan wrote:
Patrick Wiseman writes:
Hello, fellow Debian users:
I've had Debian on my computers for a very long time (can't remember
exactly when but early 2000's for sure); and I've had Lenovo laptops
for ages too. I finally need to replace my main laptop (an at
Patrick Wiseman writes:
Hello, fellow Debian users:
I've had Debian on my computers for a very long time (can't remember exactly
when but early 2000's for sure); and I've had Lenovo laptops for ages too. I
finally need to replace my main laptop (an at least 10-year old ThinkPad), so
I've
On 12/4/22, Patrick Wiseman wrote:
> Hello, fellow Debian users:
>
> I've had Debian on my computers for a very long time (can't remember
> exactly when but early 2000's for sure); and I've had Lenovo laptops for
> ages too. I finally need to replace my main laptop (an at least 10-year old
>
Hello, fellow Debian users:
I've had Debian on my computers for a very long time (can't remember
exactly when but early 2000's for sure); and I've had Lenovo laptops for
ages too. I finally need to replace my main laptop (an at least 10-year old
ThinkPad), so I've bought an X1 from Lenovo, with
On Sun, 4 Dec 2022 04:21:47 + (UTC)
L Dimov wrote:
> On Thursday, December 1, 2022, 10:12:21 PM GMT+1, Andrew M.A. Cater
> wrote:
>
>
>
> I try hard not to use the live CD but to use the normal Debian
> installer instead.
>
>
I take your point, but when things get tough, it's worth
> > BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
> > Enter 'help' for list of built-in commans.
> > (initramsfs) _
> >
> > I tried it multiple times, including first formatting the USB as a FAT32.
> > None of that helped.
> >
>
On Thu, Dec 01, 2022 at 09:53:37PM +0100, Thomas Schmitt wrote:
> Hi,
>
> L Dimov wrote:
> > DPC: RP PIO log size 0 is invalid
>
> Looks like
> https://bugzilla.kernel.org/show_bug.cgi?id=209943
> where it is characterized as annoying message but elsewise harmless.
>
>
> > thunderbolt 0-0:
On Thu, Dec 01, 2022 at 08:43:29PM +, L Dimov wrote:
>On Thursday, December 1, 2022 at 03:28:33 PM EST, Andrew M.A. Cater
> wrote:
[...]
> > Exactly how did you copy the image onto the USB stick - what command did
> > you use and did you wait until it had copied fully?
> >
> > Andy
; Enter 'help' for list of built-in commans.
> > (initramsfs) _
> >
> > I tried it multiple times, including first formatting the USB as a FAT32.
> > None of that helped.
> >
> > Any help in getting this party started will be greatly appreciated!
> > Thanks!
On Thu 01 Dec 2022 at 18:58:11 (+), L Dimov wrote:
> I am trying to run debian stable (11.5) live on a new Dell XPS laptop from a
> USB drive. After the Debian logo displays for a bout a minute, I get this
> text:
>
> DPC: RP PIO log size 0 is invalid
I agree with Thomas, just ignore it
Hi,
L Dimov wrote:
> DPC: RP PIO log size 0 is invalid
Looks like
https://bugzilla.kernel.org/show_bug.cgi?id=209943
where it is characterized as annoying message but elsewise harmless.
> thunderbolt 0-0: reading DROM failed
Looks like a problem with the egg-laying woolmilkpig, which
tting the USB as a FAT32.
> None of that helped.
>
> Any help in getting this party started will be greatly appreciated!
> Thanks!
> Luben
>
Exactly how did you copy the image onto the USB stick - what command did
you use and did you wait until it had copied fully?
Andy Cater
0-0: reading DROM failed
> BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash)
> Enter 'help' for list of built-in commans.
> (initramsfs) _
>
> I tried it multiple times, including first formatting the USB as a FAT32.
> None of that helped.
>
> Any help in
'help' for list of built-in commans.
(initramsfs) _
I tried it multiple times, including first formatting the USB as a FAT32. None
of that helped.
Any help in getting this party started will be greatly appreciated!
Thanks!
Luben
On Fri, 2022-11-18 at 16:00 +0100, hw wrote:
> On Fri, 2022-11-18 at 09:35 -0500, Jeffrey Walton wrote:
> > On Mon, Nov 14, 2022 at 6:25 AM hw wrote:
> > >
> > > I have an X540-AT2 network card in my backup server and it worked when I
> > > was
> > > running Fedora on the server.
> > >
> > > I
On Wed, 14 Sep 2022 08:51:56 -0700
Paul Scott wrote:
> On 9/14/22 06:49, pa...@quillandmouse.com wrote:
> > Folks:
> >
> > I just installed Debian testing. I do PHP development. I host live
> > websites at /var/www/html and development sites at
> > /home/paulf/public_html. I have Apache
On 9/14/22 06:49, pa...@quillandmouse.com wrote:
Folks:
I just installed Debian testing. I do PHP development. I host live
websites at /var/www/html and development sites at
/home/paulf/public_html. I have Apache configured so that
localhost/~paulf/ gets me to the sites at
Folks:
I just installed Debian testing. I do PHP development. I host live
websites at /var/www/html and development sites at
/home/paulf/public_html. I have Apache configured so that
localhost/~paulf/ gets me to the sites at /home/paulf/public_html.
I have an index.html and a script to test PHP
On 7/17/22 2:07 AM, Nicolas George wrote:
Gary L. Roach (12022-07-16):
Some time ago I installed backuppc and then decided to not use it. Even
though I purged the program and made sure that I deleted all directories, I
still get a backuppc password request when starting any of my programs.
Gary L. Roach (12022-07-16):
> Some time ago I installed backuppc and then decided to not use it. Even
> though I purged the program and made sure that I deleted all directories, I
> still get a backuppc password request when starting any of my programs.
> Anyone had this problem and if so, do you
On 7/17/22, David Wright wrote:
> On Sat 16 Jul 2022 at 19:13:25 (-0700), Gary L. Roach wrote:
>> I used apt install to install the standard debian package and used apt
>> purge to uninstall. Further, I used rm -r to clean up the directories
>> that were left. If it helps:
>>
>
> Were I to
On Sat 16 Jul 2022 at 19:13:25 (-0700), Gary L. Roach wrote:
> On 7/16/22 5:51 PM, David wrote:
> > On Sun, 17 Jul 2022 at 10:24, Gary L. Roach wrote:
> >
> > > Some time ago I installed backuppc and then decided to not use it. Even
> > > though I purged the program and made sure that I deleted
Sorry
I used apt install to install the standard debian package and used apt
purge to uninstall. Further, I used rm -r to clean up the directories
that were left. If it helps:
Operating System: Debian GNU/Linux 11
KDE Plasma Version: 5.20.5
KDE Frameworks Version: 5.78.0
Qt Version: 5.15.2
On Sun, 17 Jul 2022 at 10:24, Gary L. Roach wrote:
> Some time ago I installed backuppc and then decided to not use it. Even
> though I purged the program and made sure that I deleted all
> directories, I still get a backuppc password request when starting any
> of my programs. Anyone had this
Hi all,
Some time ago I installed backuppc and then decided to not use it. Even
though I purged the program and made sure that I deleted all
directories, I still get a backuppc password request when starting any
of my programs. Anyone had this problem and if so, do you know how to
get rid of
On Tue, May 03, 2022 at 04:39:04PM +0100, Adam Dinwoodie wrote:
Exactly what I needed, thank you!
I hadn't known about the -mentors list, and I wasn't sure going straight
to -devel was appropriate, but I think that gives me my next steps here
:)
Good luck!
--
Please do not CC me for
On Tue, May 03, 2022 at 10:22:29AM +0100, Jonathan Dowland wrote:
> On Tue, May 03, 2022 at 09:19:36AM +0100, Adam Dinwoodie wrote:
> > So I guess the question now is: what, if anything, can I do to get that
> > code into a build and out the door and onto the Debian package
> > repositories?
>
>
On Tue, May 03, 2022 at 09:19:36AM +0100, Adam Dinwoodie wrote:
So I guess the question now is: what, if anything, can I do to get that
code into a build and out the door and onto the Debian package
repositories?
Can you prepare an NMU patch (which incorporates the fix patch, as well
as a
On Mon, May 02, 2022 at 11:03:01AM -0400, songbird wrote:
>
> Adam Dinwoodie wrote:
>
> i've sent a private reply since i'm not sure gmane sent the
> Cc: i requested.
It didn't :(
> ...
> > Can anyone give any advice about what my next steps might be if I want
> > to get this patch made more
~deb11u1) do not match the installed libraries (version
2.36.0-3~deb11u1).
Is there a process for getting the dbgsym packages updated?
thanks,
mike
Adam Dinwoodie wrote:
...
> Can anyone give any advice about what my next steps might be if I want
> to get this patch made more widely available?
in looking at the following i see there is a request for
help and that not much else has happened.
Hello!
I've found a bug in the dhcpcd5 package[0]. I've submitted a patch[1],
and I'd like to look at getting it included in the official package, not
least so I can stop maintaining my own local patches. However -- unlike
when I've gone through this process after reporting bugs in other
Replying to this old mail, as I have new information...
On 2020-04-21 19:09:32 +0200, Sven Joachim wrote:
> On 2020-04-21 17:07 +0200, Vincent Lefevre wrote:
> > Sometimes packages get renamed. A renamed package becomes a
> > "transitional package", which can be tracked by deborphan and
> > can
Greg Wooledge wrote:
...
> Well, that's interesting. You *can* specify an absolute directory by
> this mechanism. I guess I learned something today.
:)
> So, what exactly was the complaint? That songbird shot themselves in
> the foot by specifying an absolute directory for core dumps that
On Mon, Feb 28, 2022 at 11:41:27AM -0500, The Wanderer wrote:
> By default, yes, that's the case. However, from songbird's original
> post:
>
> i have the following set in my /etc/sysctl.conf:
>
> # core file location and file name format
>
Hi.
On Mon, Feb 28, 2022 at 11:41:27AM -0500, The Wanderer wrote:
> On 2022-02-28 at 11:35, Greg Wooledge wrote:
>
> > On Mon, Feb 28, 2022 at 11:25:13AM -0500, songbird wrote:
> >
> >> >> me@ant(14)~$ ulimit -a
> >> >> real-time non-blocking time (microseconds, -R) unlimited
> >> >>
The Wanderer wrote:
> On 2022-02-28 at 11:35, Greg Wooledge wrote:
>> On Mon, Feb 28, 2022 at 11:25:13AM -0500, songbird wrote:
>>
>>> >> me@ant(14)~$ ulimit -a
>>> >> real-time non-blocking time (microseconds, -R) unlimited
>>> >> core file size (blocks, -c) unlimited
>>>=20
>>> i
On 2022-02-28 at 11:35, Greg Wooledge wrote:
> On Mon, Feb 28, 2022 at 11:25:13AM -0500, songbird wrote:
>
>> >> me@ant(14)~$ ulimit -a
>> >> real-time non-blocking time (microseconds, -R) unlimited
>> >> core file size (blocks, -c) unlimited
>>
>> i had accomplished the ulimit
On Mon, Feb 28, 2022 at 11:25:13AM -0500, songbird wrote:
> >> me@ant(14)~$ ulimit -a
> >> real-time non-blocking time (microseconds, -R) unlimited
> >> core file size (blocks, -c) unlimited
>
> i had accomplished the ulimit change already, but the lack of
> the proper permission
Greg Wooledge wrote:
...
> Just put 'ulimit -c unlimited' into the appropriate dot file to put
> things back to how they used to be.
>
> This changed a *really* long time ago. I don't know exactly when, or
> how. It pissed me off too, but it's the norm now, because everything
> has been dumbed
On Mon, Feb 28, 2022 at 10:01:05AM -0500, songbird wrote:
>
> i had some fun trying to figure out why a regular user could not
> dump a core file
Just put 'ulimit -c unlimited' into the appropriate dot file to put
things back to how they used to be.
This changed a *really* long time ago. I
i had some fun trying to figure out why a regular user could not
dump a core file and i had all the settings figured out. since it
was a silly and obvious thing but it stumped me for a bit i
figured it would be worth sharing. :)
the answer is at the end...
using Debian testing.
i have
On Sb, 11 dec 21, 06:04:09, Tim Woodall wrote:
> On Sat, 11 Dec 2021, Steve Dondley wrote:
>
> > > I've not used apt to install packages from files but can you put
> > > ../roundcube*.deb?
Yes, that would have worked.
> > Thanks but I just figured it out literally 30 seconds ago. Had to do the
On Sat, 11 Dec 2021, Steve Dondley wrote:
I've not used apt to install packages from files but can you put
../roundcube*.deb?
You need to install both roundcube and roundcube-core from your local
build.
If mt first suggestion doesn't work, try installing roundcube-core
first.
If you
I've not used apt to install packages from files but can you put
../roundcube*.deb?
You need to install both roundcube and roundcube-core from your local
build.
If mt first suggestion doesn't work, try installing roundcube-core
first.
If you haven't built roundcube-core then you need to
On Fri, 10 Dec 2021, Steve Dondley wrote:
I'm running bullseye with roundcube version 1.4.11 currently installed. I am
trying to upgrade to version 1.5.1.
I followed the instructions at "SimpleBackportCreation" at
https://wiki.debian.org/SimpleBackportCreation
Everything went fine until
I'm running bullseye with roundcube version 1.4.11 currently installed.
I am trying to upgrade to version 1.5.1.
I followed the instructions at "SimpleBackportCreation" at
https://wiki.debian.org/SimpleBackportCreation
Everything went fine until the very last step:
===
$ sudo
mplayer -vo vdpau -vc ffhevcvdpau 4k_stream.mp4
On Sat, Oct 30, 2021 at 4:24 PM Intense Red wrote:
>How can I convince Bullseye's VLC to read/play H265 videos?
>
>I have various h265 CODECS installed and other sources on the net
> report
> than VLC can play these files -- but not
On Sunday, October 31, 2021 2:34:57 PM CDT Georgi Naplatanov wrote:
> If VLC is not hard requirement then you can try SMPlayer/mpv or mpv only.
Thanks! Both smplayer and mpv will play the videos.
--
"There are decades where nothing happens; and there are weeks where decades
happen." --
On Sun, 2021-10-31 at 12:58 -0500, Intense Red wrote:
> > Works out of the box on mine. Played H265 4K no problem. What is the
> > error you're getting?
>
>VLC doesn't give an error, it just endlessly tries loading and reloading
> the file (a video from a security
On 10/31/21 19:58, Intense Red wrote:
>> Works out of the box on mine. Played H265 4K no problem. What is the
>> error you're getting?
>
>VLC doesn't give an error, it just endlessly tries loading and reloading
> the file (a video from a security camera).
>
>
> Works out of the box on mine. Played H265 4K no problem. What is the
> error you're getting?
VLC doesn't give an error, it just endlessly tries loading and reloading
the file (a video from a security camera).
I'm guessing it's some oddity in the file format produced by the
On 30/10/2021 22:04, piorunz wrote:
Played H265 4K no problem
VLC with
Gigapixels Of Andromeda - Remastered - h265 + 2160p + 60fps.mp4
https://i.imgur.com/yKguMos.jpg
--
With kindest regards, Piotr.
⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘⠷⠚⠋⠀ https://www.debian.org
out of the box on mine. Played H265 4K no problem. What is the
error you're getting?
"I have various h265 CODECS installed"
VLC does not require any codecs to work, what do you mean by that?
--
With kindest regards, Piotr.
⢀⣴⠾⠻⢶⣦⠀
⣾⠁⢠⠒⠀⣿⡁ Debian - The universal operating system
⢿⡄⠘
How can I convince Bullseye's VLC to read/play H265 videos?
I have various h265 CODECS installed and other sources on the net report
than VLC can play these files -- but not Bullseye's VLC.
Can anyone whack me with a clue-bat? TIA.
--
"It's easier for our software to compete with
1 - 100 of 4714 matches
Mail list logo
