On Mon 12 Jun 2017 at 10:36:56 -0400, Thomas George wrote:
> Two computers, an old pc with Debian Stretch and a new Raspberry Pi with the
> raspbian jessie operating system.
>
> The old pc prints to a lan printer with no problem. The lpstat -t shows the
> identical set up on the Raspberry Pi but
On 06/12/2017 11:08 AM, Jan-Peter Rühmann wrote:
Did the same command work with the Debian PC?
Nonetheless have you choose the right driver?
For the love of $DEITY$, must you top post?
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
Did the same command work with the Debian PC?
Nonetheless have you choose the right driver?
It is possible that your printer can´t emulate the old Matrix Printers and so
it can´t
Print Text directly the same goes for GDI Printers.
Hope that helps a little pointing out the Problem.
Am 12.06.2017
Two computers, an old pc with Debian Stretch and a new Raspberry Pi with
the raspbian jessie operating system.
The old pc prints to a lan printer with no problem. The lpstat -t shows
the identical set up on the Raspberry Pi but a command lp test.txt
results in no printer output although the
Levi Darrell wrote:
> Hi All,
>
> I'm attempting to use a Canon Image Class MF628Cw from Debian. I
> downloaded the drivers from the Canon website at
>
Which version of debian and cups?
https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/mf628cw.
> I
That was spot on. I had to download the following packages, some of which
are no longer in the repositories:
libglade2-0
libstdc++6:i386
libxml2:i386
libjpeg62:i386
libbeecrypt7:i386
libbeecrypt-dev:i386
Ran the install.sh script, and it's printing fine now.
Thanks!
Levi
2016-06-17 17:51
On Fri 17 Jun 2016 at 16:50:46 -0600, Levi Darrell wrote:
> Hi All,
>
> I'm attempting to use a Canon Image Class MF628Cw from Debian. I downloaded
> the drivers from the Canon website at
> https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/mf628cw.
> I
Hi All,
I'm attempting to use a Canon Image Class MF628Cw from Debian. I downloaded
the drivers from the Canon website at
https://www.usa.canon.com/internet/portal/us/home/support/details/printers/color-laser/mf628cw.
I installed them via dpkg, then added the printer in CUPS via a web browser
at
Hi,
I have Canon Image Reader Advanced 4025/4035 printer which from windows host I
add printer as PRXXX on SRXXX.
I can nmap SRXXX and output is below:
Host is up (0.0077s latency).
rDNS record for 10.48.2.35: srxxx
Not shown: 990 filtered ports
PORT STATE SERVICE
135/tcp open msrpc
On 6/19/13, Miten Mehta indiami...@gmail.com wrote:
Hi,
I have Canon Image Reader Advanced 4025/4035 printer which from windows host
I add printer as PRXXX on SRXXX.
I can nmap SRXXX and output is below:
Host is up (0.0077s latency).
rDNS record for 10.48.2.35: srxxx
Not shown: 990
On Thu, 24 Nov 2011 00:19:40 +, Andrew Wood wrote:
Is there a bug with adding a new network printer (IPP) in Gnome 3
because I am unable to do it in both Fedora 15 (Gnome 3.0) Fedora 16
(Gnome 3.2) and Wheezy (Gnome 3.0).
There seems to always have been a bug that prevented you from
Is there a bug with adding a new network printer (IPP) in Gnome 3
because I am unable to do it in both Fedora 15 (Gnome 3.0) Fedora 16
(Gnome 3.2) and Wheezy (Gnome 3.0).
There seems to always have been a bug that prevented you from adding a
printer using its DNS hostname, Ive alwyas had to put
Hi, everyone
I'm trying to setup a printer in network environment.
My printer is HP Laserjet 3015 PCL6.
In MS Windows, the printer is set up as follows :
Port : DOT4_001
Generic IEEE 1284.4 Printing Support
HP Laserjet 3015 PCL6
In debian, when I try to install network printer,
it requires URL,
On Sat, 2009-04-04 at 09:04 +0900, 김정환 wrote:
Hi, everyone
I'm trying to setup a printer in network environment.
My printer is HP Laserjet 3015 PCL6.
In MS Windows, the printer is set up as follows :
Port : DOT4_001
Generic IEEE 1284.4 Printing Support
HP Laserjet 3015 PCL6
In
, in the Welcome
section of the page, first, to see if the printer setup you did created
anything. If you see it there, you can then choose to Modify Printer
to verify the setup and perhaps find and fix the problem. You may also
want to look at Set Printer Options, to be sure they are correct.
If you don't
On Dec 30, 11:00 pm, Zach Uram net...@gmail.com wrote:
...
Is there a way I can manually force it to try and print using the
drivers? It should work, I followed all the steps yet it never creates
an entry for my printer :-( What is wrong?
Install the printer by running 'hp-setup' as root.
I hope it is ok to post this in here, the packages are the same in Debian.
Here is what I've done to get my HP Deskjet 960c color inkjet printer
working in Ubuntu 6.06 (Dapper Drake):
Booted up, hooked my printer up to the parallel port and powered it
on, added paper, printer's green light is
On Tue, Oct 02, 2007 at 11:01:00PM -0400, Bob C wrote:
I checked my bios setup and under Parellel Port Mode found four choices.
Normal, Bi-directional, EPP and ECP. I experienced the printer problem
with the bios set to ECP.
When I choose Normal, the printer now works.
Normal is
On Sun, Mar 11, 2007 at 08:31:16PM -0400, Bob C wrote:
I am having a difficult time getting my printer to work on Etch with
CUPS 1.2.7. When I print a page from Openoffice the printer responds,
but prints a line of meaningless symbols.
I had hoped that doing regular updates on my system,
On Mon, 2007-06-04 at 23:39 -0400, Mark Grieveson wrote:
I've tried cups but it asks for a user name and password but does not
accept mine and I have to cancel out of cups. I assume that since I'm
not on line this option will nt work.
You would need to use the root user, and the root
It's only me again! I am taking heart in the fact that I'm learning but!!!
There has to be something really stupid that I'm missing. Cups thinks it
successfully printed test pages from cups and a file from the word processor.
Where is the output going? Why doesn't it get to the printer?
Bob
IIRC cups by default does not accept root for administration.
Really? Mine does. When I open Common UNIX Printing System 1.2.7
page at http://localhost:631, it states quite clearly:
If you are asked for a username and password, enter your login username
and password or the root username and
On Tue, 2007-06-05 at 10:57 -0400, Mark Grieveson wrote:
IIRC cups by default does not accept root for administration.
Really? Mine does. When I open Common UNIX Printing System 1.2.7
page at http://localhost:631, it states quite clearly:
If you are asked for a username and password,
On Tue, Jun 05, 2007 at 13:17:28 +, bobsetch AT comcast DOT net wrote:
It's only me again! I am taking heart in the fact that I'm learning
but!!! There has to be something really stupid that I'm missing. Cups
thinks it successfully printed test pages from cups and a file from
the word
Back again. I finally have etch gnome up and running again but am still having
problems with my hp printer. I've tried using gnome desktop to setup the
printer and everything seems to be ok until I print the test page and nothing
happens. When I looki at the que iI see status: job stopped.
On Mon, Jun 04, 2007 at 05:04:23PM +, [EMAIL PROTECTED] wrote:
Back again. I finally have etch gnome up and running again but am still
having problems with my hp printer. I've tried using gnome desktop to setup
the printer and everything seems to be ok until I print the test page and
Andrew Sackville-West wrote:
On Mon, Jun 04, 2007 at 05:04:23PM +, [EMAIL PROTECTED] wrote:
Back again. I finally have etch gnome up and running again but am still having
problems with my hp printer. I've tried using gnome desktop to setup the
printer and everything seems to be ok until I
I've tried cups but it asks for a user name and password but does not
accept mine and I have to cancel out of cups. I assume that since I'm
not on line this option will nt work.
You would need to use the root user, and the root password. Go to
http://localhost:631, and, when asked, use root,
Roberto C. Sanchez wrote:
Just to be clear, printing from OOo works but the test page does not?
Yes that is what I got again this morning after rebooting the system.
When I click on Print Test Page under my printer settings in the CUPS
utility, I get the message Quota limit reached. The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, 12 Mar 2007 08:45:07 -0400
Bob C [EMAIL PROTECTED] wrote:
Roberto C. Sanchez wrote:
Just to be clear, printing from OOo works but the test page does
not?
Yes that is what I got again this morning after rebooting the system.
Hi Roberto,
Roberto C. Sanchez wrote:
There could always be some sort of bug. What does it say in
/var/log/cups/{access_log,error_log,page_log} when you try and print?
When I looked at the CUPS log files earlier today, I did not have
debugging enabled, in the file /etc/cups/cupsd.conf. I
I am having a difficult time getting my printer to work on Etch with
CUPS 1.2.7. When I print a page from Openoffice the printer responds,
but prints a line of meaningless symbols. Another strange thing is that
When I try to print a test page from CUPS setup program at
http://localhost:631/, I
On Sun, Mar 11, 2007 at 08:31:16PM -0400, Bob C wrote:
I am wondering if there is something obvious I am missing or doing wrong
here? I realize Etch is a testing version of Debian, so could there be
some sort of bug?
There could always be some sort of bug. What does it say in
Bob C wrote:
I am having a difficult time getting my printer to work on Etch with
CUPS 1.2.7. When I print a page from Openoffice the printer responds,
but prints a line of meaningless symbols. Another strange thing is that
When I try to print a test page from CUPS setup program at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sun, 11 Mar 2007 20:31:16 -0400
Bob C [EMAIL PROTECTED] wrote:
I am having a difficult time getting my printer to work on Etch with
CUPS 1.2.7. When I print a page from Openoffice the printer responds,
but prints a line of meaningless symbols.
Hi Roberto,
There could always be some sort of bug. What does it say in
/var/log/cups/{access_log,error_log,page_log} when you try and print?
When I print a page from Openoffice I get this in the log files
c2d:/var/log/cups# tail -f error_log
(no messages)
c2d:/# tail -f
On Sun, Mar 11, 2007 at 11:29:57PM -0400, Bob C wrote:
Hi Roberto,
There could always be some sort of bug. What does it say in
/var/log/cups/{access_log,error_log,page_log} when you try and print?
When I print a page from Openoffice I get this in the log files
c2d:/var/log/cups#
Freddy-Freeloader wrote:
I had this problem a while back, but for the life of me I can't
remember what the fix was. One thing you might try is HPLIP, if you're
not using it already.
Thanks for the suggestion. I installed HPLIP and find that it doesn't
detect my HP Deskjet 500.
When I ran
Rodolfo Medina [EMAIL PROTECTED] writes:
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get any help googling around.
Please a
Rodolfo Medina [EMAIL PROTECTED] writes:
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get any help googling around.
Please a
On Thu, 29 Jun 2006, Rodolfo Medina wrote:
Rodolfo Medina [EMAIL PROTECTED] writes:
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not
Rodolfo Medina [EMAIL PROTECTED] writes:
Operating system: Debian GNU/Linux 3.1 r2 Sarge.
After the Debian base installation, I had chosen the manual
packages selection and installed the following packages:
make gcc less
On Thursday 29 June 2006 7:40 am, Rodolfo Medina wrote:
I remember that without rebooting my printer wouldn't start:
we need trying again.
Ah, as root '/etc/init.d/cupsys restart' should do the trick next time.
--
Watch what people are cynical about, and one can often
discover what they
Rodolfo Medina wrote:
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get any help googling around.
Please a suggestion?
Clive
Clive Menzies [EMAIL PROTECTED] writes:
From a webbrowser go to: localhost:631
Rodolfo Medina wrote:
Thanks, I did so but cannot get in: it asks for a password
that I don't know, or it says:
The connection was refused when attempting to contact localhost:631
What then?
At:
I did: `# apt-get install cupsys'. Then, in my system, at:
/usr/share/doc/cupsys/online-docs
I found a useful document. The first step there described is:
# lpinfo -v
, but my system does not find the command `lpinfo'
nor will it install it with: `# apt-get install lpinfo':
W: Unable to
On (06/06/06 14:32), Rodolfo Medina wrote:
I did: `# apt-get install cupsys'. Then, in my system, at:
/usr/share/doc/cupsys/online-docs
I found a useful document. The first step there described is:
# lpinfo -v
, but my system does not find the command `lpinfo'
nor will it install
On Tue, 2006-06-06 at 14:32 +0200, Rodolfo Medina wrote:
I did: `# apt-get install cupsys'. Then, in my system, at:
/usr/share/doc/cupsys/online-docs
I found a useful document. The first step there described is:
# lpinfo -v
, but my system does not find the command `lpinfo'
nor
Hi, all Debian users.
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get any help googling around.
Please a suggestion?
Thanks,
Rodolfo
On Mon, 5 Jun 2006, Rodolfo Medina wrote:
Date: Mon, 05 Jun 2006 14:39:31 +0200
From: Rodolfo Medina [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Subject: Printer setup!
Resent-Date: Mon, 5 Jun 2006 07:59:47 -0500 (CDT)
Resent-From: debian-user@lists.debian.org
Hi, all Debian users
On Mon, 2006-06-05 at 14:39 +0200, Rodolfo Medina wrote:
Hi, all Debian users.
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get
On (05/06/06 14:39), Rodolfo Medina wrote:
Hi, all Debian users.
I'm new with Debian, I've only been using it for a few weeks now.
MandrakeLinux would immediately recognize and set up my
Epson Stylus C20UX printer, whereas Debian Sarge does not
seem to see it.
I could not get any help
I could not get any help googling around.
Please a suggestion?
hi rodolfo,
install the following packages and try again:
foomatic-gui, foomatic-db, foomatic-db-engine, foomatic-filters and
cupsys (as others said).
i guess it will work then.
bb sämi
--
Samuel Bächler
--
To UNSUBSCRIBE,
Samuel Bächler wrote:
I could not get any help googling around.
Please a suggestion?
hi rodolfo,
install the following packages and try again:
foomatic-gui, foomatic-db, foomatic-db-engine, foomatic-filters and
cupsys (as others said).
i guess it will work then.
bb sämi
Also
Hello!
How can I setup margins correlated to the edges of A4 paper?
I have the printer HP Business Inkjet 1000 and use the hpjis driver to
print.
If I use Gnome-cups-manager to setup the printer, and I print a test
page therein with format paper of A4, then to check margin settings, I
can
Csanyi Pal wrote:
Hello!
How can I setup margins correlated to the edges of A4 paper?
I have the printer HP Business Inkjet 1000 and use the hpjis driver to
print.
If I use Gnome-cups-manager to setup the printer, and I print a test
page therein with format paper of A4, then to check
On Sun, Apr 30, 2006 at 11:23:09AM -0400, Roberto C. Sanchez wrote:
How can I setup margins correlated to the edges of A4 paper?
I have the printer HP Business Inkjet 1000 and use the hpjis driver to
print.
If I use Gnome-cups-manager to setup the printer, and I print a test
Hello. I'm trying to set up a printer on a Pentium II running Sarge, with a
2.4.27 kernel image. The printer is an Epson Stylus Photo 890, and I've
successfully
found the driver for it (gimpprint). However, nothing happens when I try to
print a test page for it. When I check the status of the
[EMAIL PROTECTED] wrote:
Hello. I'm trying to set up a printer on a Pentium II running Sarge, with a
2.4.27 kernel image. The printer is an Epson Stylus Photo 890, and I've
successfully
found the driver for it (gimpprint). However, nothing happens when I try to
print a test page for it. When
.
Thank you.
Ramiro.
Ted
-Original Message-
From: Ramiro Aceves [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 04, 2005 1:50 AM
To: Ted Mittelstaedt
Cc: S Salamander; freebsd-questions@freebsd.org
Subject: Re: Epson Stylus C84 printer setup
Ted Mittelstaedt wrote:
Why in heavens
Perdonad amigos, se me coló este mensaje cuando en realidad debió ir a
la lista de FreeBSD.
Perdonad las molestias.
Ramiro.
On Thu, 2004-12-02 at 13:45 -0500, Thomas H. George wrote:
On Thu, Dec 02, 2004 at 11:17:58AM +, Chris Halls wrote:
On Wed, 2004-12-01 at 18:59 -0500, Thomas H. George wrote:
The other box does not find its attached printer and insists on using a
generic printer which only spits out
On Wed, 2004-12-01 at 18:59 -0500, Thomas H. George wrote:
The other box does not find its attached printer and insists on using a
generic printer which only spits out dozens of blank pages. If,
instead, I comment out export SAL_DISABLE_CUPS=1 openoffice finds the
attached printer but it
On Thu, Dec 02, 2004 at 11:17:58AM +, Chris Halls wrote:
On Wed, 2004-12-01 at 18:59 -0500, Thomas H. George wrote:
The other box does not find its attached printer and insists on using a
generic printer which only spits out dozens of blank pages. If,
instead, I comment out export
On Thu, 2 Dec 2004 01:45 pm, Thomas H. George wrote:
If oopadmin is started on Box #1 the add printer option apparently
looks in the /usr/share/foomatic/db/source/printer directory - at
least the only choices it offers are found in that directory and
DeskJet drivers are not among these
On Thu, 2 Dec 2004 01:45 pm, Thomas H. George wrote:
If oopadmin is started on Box #1 the add printer option apparently
looks in the /usr/share/foomatic/db/source/printer directory - at
least the only choices it offers are found in that directory and
DeskJet drivers are not among these
I have two boxes both using a kernel completed from kernel-source-2.4.26
and both using CUPS and openoffice.org.
Both have the latest dist-upgrade from testing.
On both I have edited /etc/openoffice/openoffice.conf and have enabled
export SAL_DISABLE_CUPS=1.
One box finds its attached printer,
On Thu, Dec 18, 2003 at 10:22:04AM +0100, Mark Schouten wrote:
On Wed, Dec 17, 2003 at 01:00:31PM -0800, Gruessle wrote:
My printer man says following. Is there a HOWTO on this?
Unix Systems
Follow the traditional configuration procedure on Unix platforms to set
up the SpeedStream 2614
On Wed, Dec 17, 2003 at 01:00:31PM -0800, Gruessle wrote:
My printer man says following. Is there a HOWTO on this?
Unix Systems
Follow the traditional configuration procedure on Unix platforms to set
up the SpeedStream 2614 print
server. The printer name is lp.
Personally, I very much
On Thu, Dec 18, 2003 at 10:22:04AM +0100, Mark Schouten wrote:
On Wed, Dec 17, 2003 at 01:00:31PM -0800, Gruessle wrote:
My printer man says following. Is there a HOWTO on this?
Unix Systems
Follow the traditional configuration procedure on Unix platforms to set
up the SpeedStream 2614
My printer man says following. Is there a HOWTO on this?
Unix Systems
Follow the traditional configuration procedure on Unix platforms to set
up the SpeedStream 2614 print
server. The printer name is lp.
--
Gruessle
http://VMCLinks.com
http://GuyScope.com
--
To UNSUBSCRIBE, email to
On Wed, Dec 17, 2003 at 01:00:31PM -0800, Gruessle wrote:
My printer man says following. Is there a HOWTO on this?
$ apt-get install doc-linux-html
$ dpkg -S doc-linux-html | grep -i print
Unix Systems
Follow the traditional configuration procedure on Unix platforms to set
up the
I'm just getting started with xsane with an epson 2400 scanner and an
epson c82 printer. I am using cups so the print command from the
console is lp. The xsane copy works only if I use lpr for the print
command and then the output is all black to green. Obviously I can
fiddle with the
I have 3 printers:
Xerox Docuprint N32
Techtronix Phaser 850
Lexmark Optra 614
all connected via ethernet on Novell Print Server
How can I configure samba to be the server for these printers?
Is there an ethernet way to do it?
thks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
On Thu, 2002-03-28 at 14:14, Bill Moseley wrote:
Before spending too much time reading dated docs, is their a current
Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not sure if they can be
used together - or if they conflict.
On Thu, Mar 28, 2002 at 11:14, Bill Moseley wrote:
Before spending too much time reading dated docs, is their a current
Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not sure if they can be
used together - or if they conflict.
I
On 30 Mar 2002 15:14:42 -0500 Brian Stults wrote:
I have an HP1200 that I set up to work with CUPS. I have a very
unofficial CUPS howto here:
http://stults.dyndns.org/~bs7452/linuxhelp/
I actually found that (through google, IIRC) and was helpful. Thanks.
I can print the test page
On Thu, 2002-03-28 at 13:14, Bill Moseley wrote:
Before spending too much time reading dated docs, is their a current
Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not sure if they can be
used together - or if they conflict.
On Thursday 28 March 2002 19:20, Dale Hair wrote:
On Thu, 2002-03-28 at 13:14, Bill Moseley wrote:
Before spending too much time reading dated docs, is their a
current Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not
sure if
Before spending too much time reading dated docs, is their a current
Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not sure if they can be
used together - or if they conflict.
Anyone using an HP1100 that can share their experience?
On 29 Mar 2002, Bill Moseley wrote:
Before spending too much time reading dated docs, is their a current
Debian-specific howto/doc on setting up printing?
I installed magicfilter, and now looking at CUPS, but not sure if they
can be used together - or if they conflict.
Anyone using an
Background info: Using potato
installed: lprng
installed: apsfilter
Apsfilter seems to have successfully set up my printer. I assume this as it
successfully printed the test sheet. When I try to print any file from bash
(i.e., cat printcap /dev/lp0), however, paper just runs through the
* Curtis Vaughan [EMAIL PROTECTED], 2002-01-30 14:46 -0500:
Background info: Using potato
installed: lprng
installed: apsfilter
Apsfilter seems to have successfully set up my printer. I assume this as it
successfully printed the test sheet. When I try to print any file from bash
(i.e.,
Trying a2ps yields the same results were I to try lpr: i.e.,
sending job '[EMAIL PROTECTED]' to [EMAIL PROTECTED]
connecting to 'localhost', attempt 1
connected to 'localhost'
requesting printer [EMAIL PROTECTED]
error 'LINK_TRANSFER_FAIL' sending str '^Blp' to [EMAIL PROTECTED]
job '[EMAIL
I'm having some trouble setting up an Epson Stylus Color
880 USB printer on my linux system. I've compiled a new
2.4.17 kernel since the 'older' 2.2.x kernels do not have
much in the way of USB support without a patch (or so I've
heard). Seems to be working fine and my OHCI USB port can
detect
In message [EMAIL PROTECTED],
Jack Pistachio [EMAIL PROTECTED] writes
I'm having some trouble setting up an Epson Stylus Color
880 USB printer on my linux system. I've compiled a new
2.4.17 kernel since the 'older' 2.2.x kernels do not have
much in the way of USB support without a patch (or so
On Fri, Jan 18, 2002 at 02:14:29PM -0500, Thomas H. George wrote:
My fault. I mistakenly built the kernel with UHCI when I should have used OHCI.
Tom George
On Fri, Jan 18, 2002 at 10:43:14AM -0500, Jerome Acks Jr wrote:
On Thu, Jan 17, 2002 at 04:23:00PM -0500, Thomas H. George,,,
On Thu, Jan 17, 2002 at 04:23:00PM -0500, Thomas H. George,,, wrote:
I have an Epson StylusColor 860 which I wish to use on a usb port. I
compiled my 2.2.19 kernel with usb support, usb file support and usb
printer. cat /proc/bus/usb/devices is emplty, cat /proc/bus/usb/drivers
I would
On Fri, Jan 18, 2002 at 10:43:14AM -0500, Jerome Acks Jr wrote:
On Thu, Jan 17, 2002 at 04:23:00PM -0500, Thomas H. George,,, wrote:
I have an Epson StylusColor 860 which I wish to use on a usb port. I
compiled my 2.2.19 kernel with usb support, usb file support and usb
printer. cat
I have an Epson StylusColor 860 which I wish to use on a usb port. I
compiled my 2.2.19 kernel with usb support, usb file support and usb
printer. cat /proc/bus/usb/devices is emplty, cat /proc/bus/usb/drivers
shows:
hub
usbdevfs
0- 15: usblp
I have checked BIOS
Hey,
I am trying to setup a Lexmark Optra M410 laser printer over a small
lan, and have so far come to nothing.
I have used both apsfilter and magicfilter to set up /etc/printcap,
but when I lp or lpr a job, nothing happens.
Can anyone help? This is a native postscript printer
Cheers,
Robert
* Patrick Mauro [EMAIL PROTECTED], 20010410 08:40 +0200:
I have an Epson Stylus Color 400. I want to be able to use it with text,
pictures, netscape, star office, etc... Well, everything.
What do I do? I've been reading vague references to CUPS, magicfilter,
apsfilter, stp, etc, etc.
On Tue, Apr 10, 2001 at 09:40:02AM +0200, Andre Berger wrote:
You also need Ghostscript (apt-cache search gs; prefer gs-aladdin,
don't forget the fonts) for aps-/magicfilter and lpr/lprng/... CUPS, on
the other hand, uses .ppd's (PS Printer Definitions, like drivers) and
its own spooling
I can't seem to figure out how to set up my printer under linux. I've done
almost everything else (with some help in some areas) but I've found that
setting up a printer is now well documented.
I have an Epson Stylus Color 400. I want to be able to use it with text,
pictures, netscape, star
From: jens [EMAIL PROTECTED]
I installed 1.1.6 the same way you are suggesting and all went fine. I
then tried installing kups which is a nicer interface as part of
snip
Did you have the same problem ? Do you use kups ? How did you resolve
the issue ?
Sorry, no, I simply use the web
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 23 March 2001 16:13, Chris Howells wrote:
From: jens [EMAIL PROTECTED]
I installed 1.1.6 the same way you are suggesting and all went
fine. I then tried installing kups which is a nicer interface
as part of
snip
Did you
Any advice on documentation or where to look for documentation about
setting up a printer in debian? I've got an O'Riely book and the debian
web page doesn't seem to have a talk about setting up a printer where it's
easy to find. Can any one point me in the right direction?
Thanks,
Eric Cheney
I've the same problem! Coming from RedHat with its magic printtool I'm
somewhat distressed about setting up a printer under Debian (e.g. epson 640
stylus color, which is surely supported).
Please help the both of us
Vittorio
On Thursday 22 March 2001 07:58, Eric R Cheney wrote:
Any advice on
it at first but know i'm a full
fledged documentation worm.
Greetings and underance to you and all of you,
Joris
-Original Message-
From: Victor [mailto:[EMAIL PROTECTED]
Sent: donderdag 22 maart 2001 12:17
To: debian-user@lists.debian.org
Subject: Re: printer setup
I've the same problem
Hallo Victor!
Am Don, 22 Mär 2001, schrieb Victor:
I've the same problem! Coming from RedHat with its magic printtool
I'm somewhat distressed about setting up a printer under Debian
(e.g. epson 640 stylus color, which is surely supported). Please
help the both of us Vittorio
I've done
1 - 100 of 171 matches
Mail list logo
