I don't use multiple X servers too often but I think that since X 4.x
there are some problems when running multiple X servers on same machine
(voodoo 3 card).
I have dri enabled, it works ok. as long as I run only one instance
of X it works without any problems.
the probl
[EMAIL PROTECTED] wrote:
>
> Um, I have been compiling kernels with DRI and VooDoo 3 driver. It won't
> work! I can't find the tdfx driver in there though .. is it vital? will it
> help? Where do I find it in make xconfig (what category?..)
yes, it's vital. it
Um, I have been compiling kernels with DRI and VooDoo 3 driver. It won't
work! I can't find the tdfx driver in there though .. is it vital? will it
help? Where do I find it in make xconfig (what category?..)
Thanks,
Deven Gallo
In a message dated 11/17/01 2:32:38 AM Eastern Sta
On Friday 16 November 2001 22:15, [EMAIL PROTECTED] wrote:
> I have a VooDoo 3 installed and the dev/3dfx device installed with the
> correct major/minor numbers, but Unreal Tournament Demo always quits saying
> it can't find the V3/Banshee card.
>
> Does anyone know
said:
> I have a VooDoo 3 installed and the dev/3dfx device installed with
> the correct major/minor numbers, but Unreal Tournament Demo always
> quits saying it can't find the V3/Banshee card.
what version of X? Glide with unreal tournament ONLY works
under Xfree 3.3.6.
t
I have a VooDoo 3 installed and the dev/3dfx device installed with the
correct major/minor numbers, but Unreal Tournament Demo always quits saying
it can't find the V3/Banshee card.
Does anyone know why it's doing this?
-- Deven Gallo
y, but from the moment I
> run it to the moment I quit it's unbelievably slow. I have a Duron 880mhz
> with 196mb RAM, VooDoo 3, 2.4.5 kernel, and XFree86 (dunno what version,
> whatever comes standard with 2.2.19pre17 Debian ISO image-made discs). Can
> someone please help me?
's unbelievably slow. I have a Duron 880mhz
with 196mb RAM, VooDoo 3, 2.4.5 kernel, and XFree86 (dunno what version,
whatever comes standard with 2.2.19pre17 Debian ISO image-made discs). Can
someone please help me?
Thanks,
Deven Gallo
Jonathan Daugherty wrote:
> > I *haven't* created the tdfx device file (/dev/cards/tdfx?), because i
> > can't remember how to (or even what the name of the file is). I
> > searched on google, without luck.
>
> It's /dev/3dfx, and you don't create it manually. Get the device3dfx-source
> packag
> I *haven't* created the tdfx device file (/dev/cards/tdfx?), because i
> can't remember how to (or even what the name of the file is). I
> searched on google, without luck.
It's /dev/3dfx, and you don't create it manually. Get the device3dfx-source
package. Build the deb from that (make-kpkg
Hey,
I've set up my voodoo like 8 times before, but something is making me
stupid and i can't figure it out this time. This is what I've
done/have:
-X 4.1.0 (w/ the DRI section configured correctly)
-Glide 3
-TDFX support enabled in the kernel (2.4.4)
I *haven't* created the tdfx device file (/
Joerg Johannes wrote:
> Hello List
>
> After my upgrade to woody (and XFree4), I cannot run q3a and ut any
> more. Both of them crash X comletely (means: gdm restartsthe X server
> automatically after a few seconds). I do not know where to start
> searching for the reasons of this. According to a
Hello List
After my upgrade to woody (and XFree4), I cannot run q3a and ut any
more. Both of them crash X comletely (means: gdm restartsthe X server
automatically after a few seconds). I do not know where to start
searching for the reasons of this. According to a posting in the
debian-x list, I on
, 2001 at 01:01:13AM -0800, Peter Jay Salzman wrote:
> dear all,
>
> i'm having the hardest time getting my voodoo 3 to work correctly. i'm
> running woody with X 4.0.
>
> i can run gears, and resize the window without a noticeable change in
> framerate, so SOMETHING
-
From: Peter Jay Salzman [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 25, 2001 1:01 AM
To: Debian user mailing list
Subject: help with voodoo 3
<< File: ATT00349.dat >> dear all,
i'm having the hardest time getting my voodoo 3 to work correctly. i'm
runni
On Sun, Feb 25, 2001 at 01:01:13AM -0800, Peter Jay Salzman wrote:
> dear all,
>
> i'm having the hardest time getting my voodoo 3 to work correctly. i'm
> running woody with X 4.0.
>
> i can run gears, and resize the window without a noticeable change in
> fr
dear all,
i'm having the hardest time getting my voodoo 3 to work correctly. i'm
running woody with X 4.0.
i can run gears, and resize the window without a noticeable change in
framerate, so SOMETHING has to be going right.
however, whenever i try to play quake3 or unreal tournamen
i'm having a hell of a time getting quake3 to run on my girlfriend's
machine. she has a
voodoo 3/3000
woody
Xfree 4 with tdfx module loaded
kernel 2.4.0 with DRI support compiled in.
3dfx module loaded in
the problem is frame rate -- slo, as if there
hate to say this, but don't use the quake from debian. the package sucks,
and if the package manager is anything like many of the other package
managers, he's unresponsive and doesn't care about his package anylonger.
do yourself a favor, and download quakeforge. you'll be much happier.
pete
s
On Wed, 10 Jan 2001, Peter Jay Salzman wrote:
> On Wed 10 Jan 01, 11:30 AM, Peter Gruber said...
> >
> > The problem is: If I start test3dfx in a xterm from X ist works.
>
> great
>
> > If I start it from the console it doesn't.
>
> it's not supposed to work from a console
>
> > If I start q
On Wed 10 Jan 01, 11:30 AM, Peter Gruber said...
>
> The problem is: If I start test3dfx in a xterm from X ist works.
great
> If I start it from the console it doesn't.
it's not supposed to work from a console
> If I start quake from X it works it just ignores keypresses unless I
> switch to
On 9 Jan 2001, Willy Lee wrote:
> "Peter" == Peter Gruber <[EMAIL PROTECTED]> writes:
>
> > On Sat, 6 Jan 2001, David Steinberg wrote:
> >> But I'm completely lost as to what to do to get it to work...
> >>
> >> If I try to run /usr/bin/test3Dfx, I get: gd error (glide): Can't
> >> find or acc
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
"Peter" == Peter Gruber <[EMAIL PROTECTED]> writes:
> On Sat, 6 Jan 2001, David Steinberg wrote:
>> But I'm completely lost as to what to do to get it to work...
>>
>> If I try to run /usr/bin/test3Dfx, I get: gd error (glide): Can't
>> find or acces
David Steinberg wrote:
> Hi all,
>
> I was wondering if anyone could help me figure out what to do to set up my
> voodoo 3 to provide hardware-accelerated OpenGL under X 3.3.6?
>
> At this point, what I think I know is that Mesa is a free implementation
> of the OpenGL API,
dear peter and david,
i couldn't get the voodoo3 to work until i installed X 4.0 and used the DRI
drivers.
pete
On Tue 09 Jan 01, 11:34 AM, Peter Gruber said...
> On Sat, 6 Jan 2001, David Steinberg wrote:
>
> > But I'm completely lost as to what to do to get it to work...
> >
> > I've install
On Sat, 6 Jan 2001, David Steinberg wrote:
> But I'm completely lost as to what to do to get it to work...
>
> I've installed the following packages (from potato):
> libglide2-v3
> libglide2-dev
> glide2-base
> mesag3-glide2
> mesag3-widgets
> mesag-glide2-dev
> mesag-widgets-dev
>
> Okay, so th
Hi all,
I was wondering if anyone could help me figure out what to do to set up my
voodoo 3 to provide hardware-accelerated OpenGL under X 3.3.6?
At this point, what I think I know is that Mesa is a free implementation
of the OpenGL API, and that it can work with (over?) Glide, which is the
>> >Can anybody tell me, what I have to install / configure to have a working
>> >GL-lib based on DRI with hardware acceleration?
>> >
>> >mfg
>> > Mischel S aus P
>>
>> Go to http://www.debianplanet.org and look on the left hand side. There is a
>> nice tutorial on installing XF4 in Debian usi
> >Can anybody tell me, what I have to install / configure to have a working
> >GL-lib based on DRI with hardware acceleration?
> >
> >mfg
> > Mischel S aus P
>
> Go to http://www.debianplanet.org and look on the left hand side. There is a
> nice tutorial on installing XF4 in Debian using a Voodo
>Can anybody tell me, what I have to install / configure to have a working
>GL-lib based on DRI with hardware acceleration?
>
>mfg
> Mischel S aus P
Go to http://www.debianplanet.org and look on the left hand side. There is a
nice tutorial on installing XF4 in Debian using a Voodoo card.
Scot
Can anybody tell me, what I have to install / configure to have a working
GL-lib based on DRI with hardware acceleration?
mfg
Mischel S aus P
Homepage: http://fsinfo.cs.uni-sb.de/~waldi
E-Mail: [EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
ICQ: #27995885
On Tue, Nov 21, 2000 at 01:08:20AM -0500, David Z Maze wrote:
> Chris Palmer <[EMAIL PROTECTED]> writes:
> CP> Anyone running a 3dfx Voodoo3 3000 on Debian?
> CP> Just curious if it works well or not.
My Voodoo3 2000 worked fine with the older Glide stuff in X 3.3.6, and
works fine with the DRI st
On Mon, Nov 20, 2000 at 07:42:38PM -0800, Chris Palmer wrote:
> Hi, all...
>
> Anyone running a 3dfx Voodoo3 3000 on Debian?
> Just curious if it works well or not.
Voodoo3 3dfx 2000 myself. Works great.
Mike
--
Michael P. Soulier <[EMAIL PROTECTED]>
"...the word HACK is used as a verb
Chris Palmer <[EMAIL PROTECTED]> writes:
CP> Anyone running a 3dfx Voodoo3 3000 on Debian?
CP> Just curious if it works well or not.
I have a Voodoo3 2000, and it works fine. I used the XF86_SVGA server
on XFree86 3.3.6 (the version in potato), and am using the XFree86
server in woody. Getting
Definitely a thumbs up.
http://linux.3dfx.com for drivers, etc.
-JoshNarins
Hi, all...
Anyone running a 3dfx Voodoo3 3000 on Debian?
Just curious if it works well or not.
-Chris
I haven't tried the 4.0 server with my Voodoo card yet - just the Mach64.
And unfortunately, I don't quite remember what went on with the config file. As
far as I
remember, it updated it automatically - but I could be completely wrong here.
I'm pretty sure
that XF4.0 can't read XF3.3.x config fil
Colin Watson wrote:
> Juergen Fiedler <[EMAIL PROTECTED]> wrote:
> >The first time I tried to install Debian on that machine, I installed
> >the base system from floppies. Then, when I tried to install X by
> >issuing an 'apt-get install task-x-window-system', I got an internal
> >error after downl
anden/ woody/$(ARCH)/
> deb-src http://samosa.debian.org/%7Ebranden/ woody/source/
>
> As to the Voodoo 3 drivers for 4.0: They scare me. The description on their
> site seems to
> indicate that games that rely on glide won't work with this server - and what
> would be t
Juergen Fiedler <[EMAIL PROTECTED]> wrote:
>The first time I tried to install Debian on that machine, I installed
>the base system from floppies. Then, when I tried to install X by
>issuing an 'apt-get install task-x-window-system', I got an internal
>error after downloading the necessary files (if
7;t you have to specify the card you want to use when you set
> > > the X system
> > > up? Or did Debian autoprobe your Voodoo card? If you actually had to
> > > specify a card,
> > > which one did you pick?
> > >
> > > Thanks,
> > > Juer
to use when you set
> > the X system
> > up? Or did Debian autoprobe your Voodoo card? If you actually had to
> > specify a card,
> > which one did you pick?
> >
> > Thanks,
> > Juergen
> >
> > Colin Watson wrote:
> >
> > > Juer
id you pick?
>
> Thanks,
> Juergen
>
> Colin Watson wrote:
>
> > Juergen Fiedler <[EMAIL PROTECTED]> wrote:
> > >I am trying to get a Voodoo 3 2000 to run under Debian 2.2 - with the
> > >added bonus that this instance would have to run on a 300Mhz
> The first time I tried to install Debian on that machine, I installed the
> base system
> from floppies. Then, when I tried to install X by issuing an 'apt-get install
> task-x-window-system', I got an internal error after downloading the
> necessary files
> (if I was still at a download speed
y a
card,
which one did you pick?
Thanks,
Juergen
Colin Watson wrote:
> Juergen Fiedler <[EMAIL PROTECTED]> wrote:
> >I am trying to get a Voodoo 3 2000 to run under Debian 2.2 - with the
> >added bonus that this instance would have to run on a 300Mhz AMD K6. Is
> &g
Juergen Fiedler <[EMAIL PROTECTED]> wrote:
>I am trying to get a Voodoo 3 2000 to run under Debian 2.2 - with the
>added bonus that this instance would have to run on a 300Mhz AMD K6. Is
>there a way to do it or should I just return the card?
It just works on my Debian unstable
Hi!
I am trying to get a Voodoo 3 2000 to run under Debian 2.2 - with the
added bonus that this instance would have to run on a 300Mhz AMD K6. Is
there a way to do it or should I just return the card?
Thanks in advance,
Juergen
hi evan,
i've tried and tried. can't get test3Dfx to work, even as root. it says
"can't find or access board", even though it's detected at boot time:
Oct 17 21:29:01 satan kernel: fb: Voodoo3 memory = 16384K
Oct 17 21:29:01 satan kernel: fb: MTRR's turned on
Oct 17 21:29:01 satan kernel: fb
Peter Jay Salzman wrote:
>
> dear all,
>
> when i try to run test3Dfx on my dual celery550 (debian 2.2, kernel
> 2.4.0-test9), it reports:
1) run it as root, does it work? If so, then it's a module problem.
2) I had some problems with the debian distro of the glide libs and
ended
up compilei
dear all,
when i try to run test3Dfx on my dual celery550 (debian 2.2, kernel
2.4.0-test9), it reports:
test00:
Clear screen to blue
2.60.00.0415
Resolution: 640x480
Press A Key To Begin Test.
gd error (glide): Can't find or access Banshee/V3 board
Hey,
I continue to make progress with the curse-ed setup
of this blasted video card (Voodoo 3 3000 AGP), but I can't seem to ever quite
get it to work. I have installed device3dfx-source, mesag2-v3, and
mesa-glide2-dev. I compiled the 3dfx module successfully, and can install
it wi
> Matheson wrote:
>
> Hey,
>
> I've been working on getting my Voodoo 3 3000 AGP to work, but I can't
> seem to. I've compiled the 3dfx module, but when I try to insmod it,
> it gives me the error:
>
> 3dfx: Could not set MTRR for Voodoo card
if
Hey,
I've been working on getting my Voodoo 3 3000 AGP
to work, but I can't seem to. I've compiled the 3dfx module, but when I
try to insmod it, it gives me the error:
3dfx: Could not set MTRR for Voodoo
card
I've made the device, and set the permissions, so
I
> :)
>
> Tal
>
>
> On Sun, 20 Aug 2000 22:48:17 -0400 (EDT), Dave Bresson said:
>
> > On Sun, 20 Aug 2000, David Bellows wrote:
> >
> > > Hello all,
> > >
> > > I'm now trying to configure my Voodoo 3 2000 card for fullscre
Dave Bresson said:
> On Sun, 20 Aug 2000, David Bellows wrote:
>
> > Hello all,
> >
> > I'm now trying to configure my Voodoo 3 2000 card for fullscreen mode.
> > As far as I can tell I've installed everything from the Debian CDs
> > pertaini
On Sun, 20 Aug 2000, David Bellows wrote:
> Hello all,
>
> I'm now trying to configure my Voodoo 3 2000 card for fullscreen mode.
> As far as I can tell I've installed everything from the Debian CDs
> pertaining to glide and mesa and 3dfx. Now I'm left with a
&
Hello all,
I'm now trying to configure my Voodoo 3 2000 card for fullscreen mode.
As far as I can tell I've installed everything from the Debian CDs
pertaining to glide and mesa and 3dfx. Now I'm left with a
device3dfx.tar.gz in /usr/src. When I untared and unzipped it I was
Hey,
I can't seem to figure out how to get my Voodoo 3
3000PCI to work on my Slink. I got the right packages and installed them
off of linux.3dfx.com (Their was a couple listed for slink, you are are
supposed to use alien to debian-ize them. Alien went fine) When I
tried to instal
No, but 2.2 (potato) does.
Sean
kasim kasmani wrote:
>
> I currenlt use mandrake 7, but have heard raving
> things about debian, so I was wondering does debian
> 2.1 support voodoo 3 video card?
I currenlt use mandrake 7, but have heard raving
things about debian, so I was wondering does debian
2.1 support voodoo 3 video card?
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
60 matches
Mail list logo
