From: Amaranath Somalapuram
adding api for flow_ctrl_get and flow_ctrl_set
by default axgbe driver flow control is dissabled
adding dpdk flow control to set water high and low
Signed-off-by: Amaranath Somalapuram
---
drivers/net/axgbe/axgbe_ethdev.c | 85 +++-
drive
From: Kalesh AP
return value stored in "ret" but it has been overwritten before use.
CID 353621: Code maintainability issues (UNUSED_VALUE)
Fixes: 57813868 ("net/bnxt: fix VLAN strip")
Fixes: df6cd7c1 ("net/bnxt: handle reset notify async event from FW")
Signed-off-by: Kalesh AP
Reviewed-by:
From: Kalesh AP
Use "dev->data->dev_started" state, instead of local "dev_stopped"
to check whether port has been started or not.
Fixes: 316e412299fd ("net/bnxt: fix crash when closing")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Somnath Kotur
Signed-off-by: Somnath Kotur
---
Certain applications(Ex: OVS-DPDK) can issue rte_flow_create with mark id
set to 0. The mark table entry creation in the driver was assuming
non-zero mark ids. Fix it to have a valid flag for each entry.
Also, it is possible that both RSS flags and cfa_code/ mark id are
set as part of the Rx packet
Allow RSS action with group ID 0. The RSS match check will ensure if
requested RSS action configuration parameters should be allowed as per
the VNIC's RSS configuration or not and if it does match as it is
by design in OVS-DPDK use case, the default vnic can be used to create
the filter. As part of
From: Kalesh AP
This change could help in reducing the size of bnxt PMD private
data structure by converting a uint8_t variable to use bit map flag.
Fixes: 5cd0e2889c432 ("net/bnxt: support NIC Partitioning")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Somnath Kotur
Signed-off-b
From: Kalesh AP
Since "eth_dev->data->dev_started" has been assigned to 0 at the
beginning of bnxt_dev_stop_op() routine, the code inside the if()
condition is redundant. Remove it.
Anyways "eth_dev->data->dev_link.link_status" will be set to 0 in
bnxt_dev_set_link_down_op() later in the routine
From: Kalesh AP
Use "dev->data->dev_started" state, instead of local BNXT_FLAG_INIT_DONE
to check whether device has been initialised or not.
Fixes: ed2ced6fe927 ("net/bnxt: check initialization before accessing stats")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Ajit Kumar Khapa
Invoke bnxt_get_unused_filter() inside bnxt_alloc_filter() so that
all filters are allocated from one common routine.
Fixes: f92735db1e4c ("net/bnxt: add L2 filter alloc/init/free")
Reviewed-by: Kalesh Anakkur Purayil
Signed-off-by: Somnath Kotur
---
drivers/net/bnxt/bnxt_filter.c | 4 +---
1
Please apply.
Kalesh AP (5):
net/bnxt: remove redundant if statement
net/bnxt: remove redundant macro
net/bnxt: remove unnecessary structure variable
net/bnxt: remove a redundant variable
net/bnxt: fix coverity warnings
Somnath Kotur (4):
net/bnxt: fix bnxt_alloc_filter() to use a com
Now that the L2 filter reference count is bumped up in all cases
including bnxt_alloc_filter() which is issued in init, just move this
ref count bump inside the routine issuing the HWRM cmd so that it is
bumped up only if the cmd is successful.
Fixes: f0f6b5e6cf94 ("fix reusing L2 filter")
Review
Hi,
>
> From: Sardar Shamsher Singh
>
> test application to test Cipher/Authentication/AEAD in AMD CCP
> a crypto controller. This test application can be used as
> reference to develop/test crypto algo.
>
> Signed-off-by: Sardar Shamsher Singh
> ---
Why do you need a separate example applicat
From: Kalesh AP
Use "dev->data->dev_started" state, instead of local "dev_stopped"
to check whether port has been started or not.
Fixes: 316e412299fd ("net/bnxt: fix crash when closing")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Somnath Kotur
Signed-off-by: Kalesh AP
---
dri
From: Kalesh AP
This change could help in reducing the size of bnxt PMD private
data structure by converting a uint8_t variable to use bit map flag.
Fixes: 5cd0e2889c432 ("net/bnxt: support NIC Partitioning")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Somnath Kotur
Signed-off-b
Allow RSS action with group ID 0. The RSS match check will ensure if
requested RSS action configuration parameters should be allowed as per
the VNIC's RSS configuration or not and if it does match as it is
by design in OVS-DPDK use case, the default vnic can be used to create
the filter. As part of
Certain applications(Ex: OVS-DPDK) can issue rte_flow_create with mark id
set to 0. The mark table entry creation in the driver was assuming
non-zero mark ids. Fix it to have a valid flag for each entry.
Also, it is possible that both RSS flags and cfa_code/ mark id are
set as part of the Rx packet
Now that the L2 filter reference count is bumped up in all cases
including bnxt_alloc_filter() which is issued in init, just move this
ref count bump inside the routine issuing the HWRM cmd so that it is
bumped up only if the cmd is successful.
Fixes: f0f6b5e6cf94 ("fix reusing L2 filter")
Review
From: Kalesh AP
Use "dev->data->dev_started" state, instead of local BNXT_FLAG_INIT_DONE
to check whether device has been initialised or not.
Fixes: ed2ced6fe927 ("net/bnxt: check initialization before accessing stats")
Reviewed-by: Santoshkumar Karanappa Rastapur
Reviewed-by: Ajit Kumar Khapa
From: Kalesh AP
Since "eth_dev->data->dev_started" has been assigned to 0 at the
beginning of bnxt_dev_stop_op() routine, the code inside the if()
condition is redundant. Remove it.
Anyways "eth_dev->data->dev_link.link_status" will be set to 0 in
bnxt_dev_set_link_down_op() later in the routine
Invoke bnxt_get_unused_filter() inside bnxt_alloc_filter() so that
all filters are allocated from one common routine.
Fixes: f92735db1e4c ("net/bnxt: add L2 filter alloc/init/free")
Reviewed-by: Kalesh Anakkur Purayil
Signed-off-by: Somnath Kotur
---
drivers/net/bnxt/bnxt_filter.c | 4 +---
1
Please apply.
Kalesh AP (4):
net/bnxt: remove redundant if statement
net/bnxt: remove redundant macro
net/bnxt: remove unnecessary structure variable
net/bnxt: remove a redundant variable
Somnath Kotur (4):
net/bnxt: fix bnxt_alloc_filter() to use a common routine
net/bnxt: fix bumpin
>
> Looks good to me.
>
> Acked-by: Ravi Kumar
>
> Regards,
> Ravi
> >
> >
> >
> >fixes ccp crypto driver to make aes-gcm output match with openssl/NIST
> output
> >
> >Signed-off-by: Selwin Sebastian
> >---
Please mention commit id for the original patch for which this fix is submitted.
"Fi
> >
> > Remove one AES GCM scatter-gather unit test repetition
> > and enable this test on QAT (after a fix included in the commit
> > b26ef1a11f21).
> >
> > Fixes: 157d0b11d204 ("test/crypto: add capability checks")
> > Fixes: b26ef1a11f21 ("test/crypto: fix missing operation status check")
> >
>
>
> DPAA sec driver is using virtual to physical address
> translation in its data path and driver is using
> dpaax_iova_table_update() API in every address translation
> which is very costly.
> This patch moves dpaax_iova_table_update() calling to rte_dpaa_mem_ptov(),
> only if it fails to found
>
> The devices which are masked by cryptodev mask should not be initialized
> and skipped while traversing the device list.
>
> Fixes: 61a7018ba0 ("examples/l2fwd-crypto:skip dev configure for masked
> devices")
> Cc: sta...@dpdk.org
>
> Signed-off-by: Apeksha Gupta
> ---
Acked-by: Akhil Goy
>
>
> Looks good to me.
>
> Acked-by: Ravi Kumar
>
Applied to dpdk-next-crypto
Thanks
> >
> > This commit adds cycle-count mode to the compression perf tool.
> > The new mode enhances the compression performance tool to allow
> > cycle-count measurement of both hardware and softwate PMDs.
> >
> > Signed-off-by: Artur Trybula
> Acked-by: Fiona Trahe
Applied to dpdk-next-crypto
Th
On Wed, Jan 22, 2020 at 10:36 AM Honnappa Nagarahalli
wrote:
>
>
>
> > Subject: [PATCH] event/dsw: use custom element size ring for control
> >
> > Replace DSW's use of regular DPDK rings (and code for packing/unpacking
> > control messages into void pointers) with custom size rings.
> >
> > In a
From: Pavan Nikhilesh
Add em main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/l3fwd.h | 10 ++
examples/l3fwd/l3fwd_em.c| 177 +++
examples/l3fwd/l3fwd_em.h|
From: Pavan Nikhilesh
Update l3fwd user guide to include event device related information.
Update release notes and MAINTAINERS file.
Signed-off-by: Pavan Nikhilesh
---
MAINTAINERS | 1 +
doc/guides/rel_notes/release_20_02.rst | 5 ++
doc/guides/sample_app_ug/l3_
From: Pavan Nikhilesh
Add event eth Rx/Tx adapter setup for both generic and internal port
event device pipelines.
Signed-off-by: Sunil Kumar Kori
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/l3fwd_event.c | 3 +
examples/l3fwd/l3fwd_event.h | 1 +
example
From: Pavan Nikhilesh
Add service core setup when eventdev and Rx/Tx adapter don't have
internal port capability.
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/l3fwd_event.c | 6 ++
examples/l3fwd/main.c| 188 +++
2 files changed, 150 insertions(+)
From: Pavan Nikhilesh
Add graceful teardown that addresses both event mode and poll mode.
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/main.c | 50 +--
1 file changed, 34 insertions(+), 16 deletions(-)
diff --git a/examples/l3fwd/main.c b/examples/
From: Pavan Nikhilesh
Add lpm main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/l3fwd.h | 9 ++
examples/l3fwd/l3fwd_event.c | 9 ++
examples/l3fwd/l3fwd_event.h | 5 +
examples/l3fwd/l3fwd_lpm.c | 203 +
From: Sunil Kumar Kori
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori
---
examples/l3fwd/l3fwd_event.c | 28 +-
examples/l3fwd/l3fwd_event.h | 1 +
examples/l3fwd/l3fwd_event_generic.c |
From: Pavan Nikhilesh
Add event device configuration based on the capabilities of the
probed event device.
Signed-off-by: Pavan Nikhilesh
---
examples/l3fwd/l3fwd_event.c | 3 +
examples/l3fwd/l3fwd_event.h | 36 ++
examples/l3fwd/l3fwd_event_generic.c
From: Sunil Kumar Kori
Add ethernet port Rx/Tx queue setup for event device which are later
used for setting up event eth Rx/Tx adapters.
Signed-off-by: Sunil Kumar Kori
Signed-off-by: Nipun Gupta
---
examples/l3fwd/l3fwd.h | 10 +++
examples/l3fwd/l3fwd_event.c | 138 +
From: Sunil Kumar Kori
Add infra to split eventdev framework based on event Tx adapter
capability.
If event Tx adapter has internal port capability then we use
`rte_event_eth_tx_adapter_enqueue` to transmitting packets else
we use a SINGLE_LINK event queue to enqueue packets to a service
core whi
From: Pavan Nikhilesh
This patchset adds support for event mode in l3fwd.
The poll mode is still the default mode of operation.
The following new command line parameters are added:
--mode: Dictates the mode of operation either poll or event. If unset then
by default poll mode is used.
From: Sunil Kumar Kori
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RT
Hi Akhil, Konstantin,
Do you have any further comments?
Thanks,
Anoob
> -Original Message-
> From: dev On Behalf Of Anoob Joseph
> Sent: Monday, January 20, 2020 7:15 PM
> To: Akhil Goyal ; Radu Nicolau
> ; Thomas Monjalon
> Cc: Anoob Joseph ; Jerin Jacob Kollanukkaran
> ; Narayana Pra
Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.
Legacy mode is not currently supported.
Signed-off-by: Konstantin Ananyev
Signed-off-by: Marcin Smoczynski
---
examples/ipsec-secgw/ipsec.c |
Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.
Signed-off-by: Konstantin Ananyev
Signed-off-by: Marcin Smoczynski
---
examples/ipsec-secgw/test/common_defs.sh
Update documentation with a description of cpu crypto in cryptodev,
ipsec and security libraries.
Add release notes for 20.02.
Signed-off-by: Marcin Smoczynski
---
doc/guides/cryptodevs/aesni_gcm.rst | 5
doc/guides/prog_guide/cryptodev_lib.rst | 31 +
doc/guid
Update library to handle CPU cypto security mode which utilizes
cryptodev's synchronous, CPU accelerated crypto operations.
Signed-off-by: Konstantin Ananyev
Signed-off-by: Marcin Smoczynski
---
lib/librte_ipsec/esp_inb.c | 154 ++-
lib/librte_ipsec/esp_outb.c
Introduce CPU crypto action type allowing to differentiate between
regular async 'none security' and synchronous, CPU crypto accelerated
sessions.
Signed-off-by: Marcin Smoczynski
---
lib/librte_security/rte_security.h | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/lib/
Add unit and performance tests for CPU crypto mode currently implemented
by AESNI-GCM cryptodev. Unit tests cover AES-GCM and GMAC test vectors.
Signed-off-by: Marcin Smoczynski
---
app/test/Makefile | 1 +
app/test/cpu_crypto_all_gcm_perf_test_cases.h | 11 +
app/
Add support for CPU crypto mode by introducing required handler.
Crypto mode (sync/async) is chosen during sym session create if an
appropriate flag is set in an xform type number.
Authenticated encryption and decryption are supported with tag
generation/verification.
Signed-off-by: Marcin Smoczy
Add new API allowing to process crypto operations in a synchronous
manner. Operations are performed on a set of SG arrays.
Sync mode is selected by setting appropriate flag in an xform
type number. Cryptodevs which allows CPU crypto operation mode have to
use RTE_CRYPTODEV_FF_SYM_CPU_CRYPTO capabi
Originally both SW and HW crypto PMDs use rte_crypot_op based API to
process the crypto workload asynchronously. This way provides uniformity
to both PMD types, but also introduce unnecessary performance penalty to
SW PMDs that have to "simulate" HW async behavior (crypto-ops
enqueue/dequeue, HW ad
13/01/2020 22:55, Pallavi Kadam:
> Added support for additional common files in meson build
> to expand Windows EAL and to support the lcore parsing
> feature on Windows.
>
> Signed-off-by: Pallavi Kadam
> Signed-off-by: Antara Ganesh Kolar
> Reviewed-by: Ranjit Menon
> Reviewed-by: Keith Wiles
13/01/2020 22:55, Pallavi Kadam:
> Added #ifndef WIN64 to exclude syslog definitions and parameters
> from Windows builds.
>
> Signed-off-by: Pallavi Kadam
> Reviewed-by: Ranjit Menon
> ---
> --- a/lib/librte_eal/common/eal_common_options.c
> +++ b/lib/librte_eal/common/eal_common_options.c
> @@
13/01/2020 22:55, Pallavi Kadam:
> Modified \common\include\arch\x86\rte_vect.h
> to include SSE4 header for Windows.
>
> Adding dlfcn.h on Windows to support common code.
>
> Adding eal_filesystem.h to support functions and
> path defines for files and directories on Windows.
I don't see any re
Hello,
Can someone clarify what I am interpreting as a documentation conflict
regarding the "priority" field for rte_table_acl_rule_add_params? Below
documentation says "highest priority wins", but the header file comment says 0
is highest priority. Based on my testing with conflicting entries
Previously, when librte_bpf is built with meson+ninja, its
headers such as bpf_def is not installed to the system.
This commit fixes this problem.
Fixes: 94972f3 ("bpf: add BPF loading and execution framework")
Signed-off-by: Junxiao Shi
---
lib/librte_bpf/meson.build | 2 +-
1 file changed, 1
Even though there are some vendors which offer Regex HW offload, due to
lack of standard API, It is diffcult for DPDK consumer to use them
in a portable way.
This _RFC_ attempts to standardize the RegEx/DPI offload APIs for DPDK.
This RFC crafted based on SW Regex API frameworks such as libpcre a
When OpenSSL or AESNI-MB cryptodev is being used in sessionless mode
for symmetric crypto operation (e.g. SHA256 hash), the driver prints
error message:
CRYPTODEV: set_sym_session_private_data() line 489:
Set private data for driver 0 not allowed
Then, AESNI-MB driver segfaults
27/01/2020 16:37, Ferruh Yigit:
> On 1/24/2020 7:37 PM, Thomas Monjalon wrote:
> > 24/01/2020 17:36, Ferruh Yigit:
> >> On 1/23/2020 6:20 PM, Alexander Kozyrev wrote:
> >>> Remove -Werror-all flag in ICC configuration file to stop treating ICC
> >>> warnings as errors in DPDK due to many false posi
On Mon, Jan 27, 2020 at 9:43 PM Aaron Conole wrote:
>
> Jerin Jacob Kollanukkaran writes:
>
> > Hi All,
> >
> > I would like to add tracing support for DPDK.
> > I am planning to add this support in v20.05 release.
> >
> > This RFC attempts to get feedback from the community on
> >
> > a) Tracing
On 1/27/2020 3:34 AM, Stephen Hemminger wrote:
> The previous patch to change default IP addresses for tx only
> mode got the wrong values (typo).
>
> Fixes: bf5b2126bf44 ("app/testpmd: add ability to set Tx IP and UDP
> parameters")
> Cc: sta...@dpdk.org
> Signed-off-by: Stephen Hemminger
> ---
On Fri, Jan 24, 2020 at 9:35 AM wrote:
>
> From: Pavan Nikhilesh
>
> This patchset adds support for event mode in l3fwd.
> The poll mode is still the default mode of operation.
>
> The following new command line parameters are added:
> --mode: Dictates the mode of operation either poll or event.
Jerin Jacob Kollanukkaran writes:
> Hi All,
>
> I would like to add tracing support for DPDK.
> I am planning to add this support in v20.05 release.
>
> This RFC attempts to get feedback from the community on
>
> a) Tracing Use cases.
> b) Tracing Requirements.
> b) Implementation choices.
> c) T
If ibverbs_link is static and the application choose to link DPDK
as static libraries, both PMD and ibverbs libraries must be linked
as static libraries. And the dependencies of ibverbs (netlink) must
still be linked as shared libraries.
Unfortunately, meson forget about the static requirement for
The libibverbs (and libmlx4/5) can be statically embedded
in the shared PMD library, or in the application with the static PMD.
It was supported with make build system in
commit 2c0dd7b69fb0 ("config: add static linkage of mlx dependency").
The same feature is enabled with meson when using pkg-con
This is the follow-up of the feature I added one year ago:
static linkage of libibverbs in mlx PMDs.
The first implementation was focused on "make".
This second round does the same with "meson".
changes in v2:
- split mlx patch for normal addition and workarounds
- fix ldflags for ibverbs install
If a dependency is required for a driver build,
but should not be exposed to the application (via pkg-config),
it can be declared in the array hidden_deps.
The hidden_deps are used as internal dependencies,
when building the shared library and the first stage of static library.
The final static li
The shell script options-ibverbs-static.sh was used with make
in forcing static linkage of ibverbs libraries.
When choosing to link with a static dependency in meson,
the generated .pc file will not force such static linkage.
The solution will rely on using this script in meson.
If linking with l
On 1/24/2020 7:37 PM, Thomas Monjalon wrote:
> 24/01/2020 17:36, Ferruh Yigit:
>> On 1/23/2020 6:20 PM, Alexander Kozyrev wrote:
>>> Remove -Werror-all flag in ICC configuration file to stop treating ICC
>>> warnings as errors in DPDK due to many false positives. We are using
>>> GCC and Clang as a
Thanks Prateek for the comments. Agree with both the corrections. Would you
like to submit a patch?
Thanks,
Honnappa
> -Original Message-
> From: Thomas Monjalon
> Sent: Sunday, January 26, 2020 3:36 PM
> To: prateekag
> Cc: dev@dpdk.org; Honnappa Nagarahalli
> Subject: Re: [dpdk-web]
Hi Jerin, Akhil,
Let me summarize the design changes from the discussions below.
Currently, drivers/crypto/octeontx2/otx2_security.c defines all security ctx
ops for the ethdev (idea was to add all crypto security ctx for lookaside also
there). That will be moved to drivers/net/octeontx2 as is.
Use the MLX4_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX4_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX4_DEBUG is enabled MLX4_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX4_DEBUG is disabled
Use the MLX5_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX5_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX5_DEBUG is enabled MLX5_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX5_DEBUG is disabled
Remove -Werror-all flag in ICC configuration file to stop treating ICC
warnings as errors in DPDK due to many false positives. We are using
GCC and Clang as a benchmark for warnings anyway for simplification.
Suggested-by: Thomas Monjalon
Signed-off-by: Alexander Kozyrev
Acked-by: Viacheslav Ovs
Use the RTE_LIBRTE_MLX5_DEBUG configuration flag to get rid of dependency
on the NDEBUG definition. This is a preparation step to switch
from standard assert clauses to DPDK RTE_ASSERT ones in MLX5 driver.
Signed-off-by: Alexander Kozyrev
Acked-by: Viacheslav Ovsiienko
---
drivers/net/mlx5/Make
The Mellanox PMD uses the NDEBUG definition to control built-in debug
features including the asserting one. The DPDK uses a bit different
approach and provides RTE_ASSERT macro and appropriate global
configuration option: CONFIG_RTE_ENABLE_ASSERT.
The patch set introduces the MLX_ASSERT macros that
Use the RTE_LIBRTE_MLX4_DEBUG compilation flag to get rid of dependency
on the NDEBUG definition. This is a preparation step to switch
from standard assert clauses to DPDK RTE_ASSERT ones in MLX4 driver.
Signed-off-by: Alexander Kozyrev
Acked-by: Viacheslav Ovsiienko
---
drivers/net/mlx4/Makefi
Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.
meson -Ddisable_drivers=crypto/*,event/* build
to do a build omitting
Hi,
Could not find a way to map specific port queues to specific cores.
For example, mapping port 0 to cores 1-7, port 1 to cores 8-14 and port 2 to
cores 15-21 is very easy in 'l3fwd' test application:
--config '(0,0,1),(0,1,2),(0,2,3),(0,3,4),(0,4,5),(0,5,6),(0,6,7),
(1,0,8),(1,1,9),(1,2,10),(
Hello community,
I am working on a project in ns-3(network simulator) where we have a
NetDevice implemented called "DpdkNetDevice" which emulates a net device
using dpdk. The traffic control module/layer having the qdisc is a part of
ns-3 and the transmit ring is a part of the dpdk environment. Bot
Defects reported by coverity scan are resolved.
Coverity issue: CID 353611 - Error handling.
Coverity issue: CID 353622 - Error handling.
Coverity issue: CID 353632 - NULL pointer dereference.
Signed-off-by: Mahipal Challa
---
drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c | 18 ++
1
On Mon, Jan 27, 2020 at 12:26:53PM +0100, Andrzej Ostruszka wrote:
> On 1/24/20 4:10 PM, Bruce Richardson wrote:
> > Rather than having to explicitly list each and every driver to disable in a
> > build, we can use a small python script and the python glob library to
> > expand out the wildcards. T
On Fri, 2020-01-24 at 15:10 +, Bruce Richardson wrote:
> Rather than having to explicitly list each and every driver to
> disable in a
> build, we can use a small python script and the python glob library
> to
> expand out the wildcards. This means that we can configure meson
> using e.g.
>
>
>
> Bugzilla ID: 377
>
> Signed-off-by: Junxiao Shi
> ---
Please add appropriate description about the bug and also add
Fixes line to show the original commit.
Change the patch title also as
"drivers/crypto: fix ..."
Hi Jerin,
>
> On Mon, Jan 27, 2020 at 4:10 PM Akhil Goyal wrote:
> >
> >
> > >
> > > On Wed, Jan 22, 2020 at 6:26 PM Akhil Goyal wrote:
> > > >
> > > > > > >
> > > > > > > Hi Jerin,
> > > > > > >
> > > > > > > Will do the suggested change (RX/rx-> Rx & TX/tx->Tx). Do you
> > > > > > > want
>
On 1/24/20 4:10 PM, Bruce Richardson wrote:
> Rather than having to explicitly list each and every driver to disable in a
> build, we can use a small python script and the python glob library to
> expand out the wildcards. This means that we can configure meson using e.g.
>
> meson -Ddisable_d
Hi Pavel,
> From: Pavel Belous
>
> This RFC suggest possible API to implement generic MACSEC HW
> offload in DPDK infrastructure.
>
> Right now two PMDs implementing MACSEC hw offload via private
> API: ixgbe (Intel) and atlantic (Aquantia).
>
> During that private API discussion it was decide
On Mon, Jan 27, 2020 at 4:10 PM Akhil Goyal wrote:
>
>
> >
> > On Wed, Jan 22, 2020 at 6:26 PM Akhil Goyal wrote:
> > >
> > > > > >
> > > > > > Hi Jerin,
> > > > > >
> > > > > > Will do the suggested change (RX/rx-> Rx & TX/tx->Tx). Do you want
> > > > > > me
> > > > > > to trim the headline as
> -Original Message-
> From: dev On Behalf Of Stephen Hemminger
> Sent: Wednesday, January 22, 2020 4:19 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] SPDX license nag
>
> Files without SPDX License
> --
> app/test-pmd/flowgen.c - Tilera/
> -Original Message-
> From: dev On Behalf Of Mcnamara, John
> Sent: Monday, January 20, 2020 6:00 PM
> To: Thomas Monjalon ; Trahe, Fiona
> ; Trybula, ArturX
> Cc: dev@dpdk.org; sta...@dpdk.org; shal...@marvell.com; Dybkowski, AdamX
> ; Danilewicz, MarcinX
> ; Akhil Goyal
> Subject:
> -Original Message-
> From: dev On Behalf Of Stephen Hemminger
> Sent: Wednesday, December 4, 2019 3:55 PM
> To: dev@dpdk.org
> Cc: Stephen Hemminger
> Subject: [dpdk-dev] [PATCH 2/5] devtools: add license tag to cocci.sh
>
> This file still had original BSD boilerplate text.
> Replace
On Sun, 2020-01-26 at 14:58 +, Ali Alnubani wrote:
> Hi Luca,
> Sorry for the late response 😊
>
> > -Original Message-
> > From: Luca Boccassi <
> > bl...@debian.org
> > >
> > Sent: Thursday, January 23, 2020 1:06 PM
> > To: Ali Alnubani <
> > alia...@mellanox.com
> > >; dpdk stable <
>
> On Wed, Jan 22, 2020 at 6:26 PM Akhil Goyal wrote:
> >
> > > > >
> > > > > Hi Jerin,
> > > > >
> > > > > Will do the suggested change (RX/rx-> Rx & TX/tx->Tx). Do you want me
> > > > > to trim the headline as well?
> > > > >
> > > >
> > > > Hi Anoob,
> > > >
> > > > > @Akhil, did you get a
In current version, there is a function which parses
the corelist based on user value. A new generic
function eal_parse_optionlist is added which will
parse corelist as well as similar user input so
that we can use it as a public API too.
Signed-off-by: Hariprasad Govindharajan
---
lib/librte_ea
In current version, we are setting the ports
using portmask. With portmask, we can use only
upto 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
- Using portmask (-p [0x]nnn): mask must be in hex for
This patchset contains 2 patches.
The first one will be changes to testpmd where a new option
portlist is added.
The second one adds a function eal_parse_optionlist which will
parse user input
The following new command line parameter is added:
--portlist: user can specify the list of forwarding p
This patch reorganize the members of a structure
used by driver in its data-path to improve
performance.
Signed-off-by: Gagandeep Singh
---
drivers/crypto/dpaa_sec/dpaa_sec.h | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h
b/drivers
DPAA sec driver is using virtual to physical address
translation in its data path and driver is using
dpaax_iova_table_update() API in every address translation
which is very costly.
This patch moves dpaax_iova_table_update() calling to rte_dpaa_mem_ptov(),
only if it fails to found translation fro
Hi Akhil,
Minor correction. Please see inline.
Thanks,
Anoob
> -Original Message-
> From: dev On Behalf Of Anoob Joseph
> Sent: Monday, January 27, 2020 1:33 PM
> To: Akhil Goyal ; Declan Doherty
> ; Thomas Monjalon
> Cc: Vamsi Krishna Attunuru ; Jerin Jacob
> Kollanukkaran ; Narayana
Hi Akhil,
Please see inline.
Thanks,
Anoob
> -Original Message-
> From: Akhil Goyal
> Sent: Monday, January 27, 2020 12:31 PM
> To: Anoob Joseph ; Declan Doherty
> ; Thomas Monjalon
> Cc: Vamsi Krishna Attunuru ; Jerin Jacob
> Kollanukkaran ; Narayana Prasad Raju Athreya
> ; Kiran Kuma
99 matches
Mail list logo
