On Thu, Mar 29, 2018 at 10:27:36PM +0530, Aditya Xavier wrote:
> Thanks for the tip. Would try that too..
>
> However, I have tried few variations to check the BLE side ( whether it was
> responsible for truncating )
>
> 1. I am able to send the same message using encoding only.. i.e. if I
Hi Lichun,
On 29 March 2018 at 10:42, Li-Chun Ko wrote:
> Hi all,
>
> I am running blemesh with mynewt 1.3.0 on Nordics pca 10040. Here are two
> questions I have:
>
> 1. Is it correct that the current mynewt release doesn't support the
> Provisioner's role? I wasn't able
Hi Łukasz,
I am using the ADV bearer.
I don't have the log at hand but you should get all the information from
the picture I attached in my previous email. It was captured by a low cost
Nordic sniffer.
I used bascally the same steps that were mentioned in the BLE mesh tutroial
except I changed
Attached it again here.
Łukasz Rymanowski 於 2018年3月29日 週四 下午6:33 寫道:
> Hi Lichun
>
> On 29 March 2018 at 12:28, Li-Chun Ko wrote:
> > Hi Łukasz,
> >
> > I am using the ADV bearer.
> >
> > I don't have the log at hand but you should get all
I hope it works this time!
https://imgur.com/ZsqnidG
Cheers,
Lichun
2018-03-29 19:39 GMT+08:00 Michał Narajowski
:
> Hi Li-Chun,
>
> We still didn't get the picture. Please try using some hosting website
> like Imgur and send us the link to the picture.
>
> Best
Hi Li-Chun,
We still didn't get the picture. Please try using some hosting website
like Imgur and send us the link to the picture.
Best regards
Michał Narajowski
2018-03-29 13:20 GMT+02:00 Li-Chun Ko :
> Attached it again here.
>
> Łukasz Rymanowski
Hi,
On 29 March 2018 at 14:16, Li-Chun Ko wrote:
> I hope it works this time!
>
> https://imgur.com/ZsqnidG
Thanks. Well this looks good to me. You can verify with Mesh Profile
Specification chapter 3.9.2 Unprovisioned Device beacon
Probably Wireshark does not decode it
Hi Aditya,
On Thu, Mar 29, 2018 at 08:52:08PM +0530, Aditya Xavier wrote:
[...]
> And it doesn’t work when am trying to trigger it from BLE.
>
> Assuming it was a memory issue, I used a mem_pool, mbuf, allocating
> and reserving space. However, problem remains.
>
> It usually encodes and sends