jsharper wrote:
> peter;336092 Wrote:
>
>> I noticed that both my controllers and one SB3 did not renew their
>> lease but just kept using the IP they had before.
>> ...
>> It seems to me the controllers and sb's should request a new address
>> after losing connectivity to avoid this kind of th
peter;336092 Wrote:
>
> I noticed that both my controllers and one SB3 did not renew their
> lease but just kept using the IP they had before.
> ...
> It seems to me the controllers and sb's should request a new address
> after losing connectivity to avoid this kind of thing.
>
I don't believe
I got it working! I hope! I didn't do anything differently this time,
that I know of.
I uninstalled SC again and reset both of my Squeezeboxes again. I set
everything up in the Squeezeboxes until they said they couldn't find
SqueezeCenter. Then I installed SqueezeCenter, rebooted the computer
I also noticed IP conflicts the other day when I connected my three
Squeezebox Receivers and two Controllers, but didnt think of it being
related to the Squeezeboxes, because I was also setting up my internet
connection, wireless network and three laptops at the time.
--
KasperLK
-
Phil Leigh wrote:
> do you use dhcp from the router? - could there be an ip conflict on your
> network?
>
I just had an event myself where my squeeze devices seemed to cause ip
conflicts. Many of my devices have static ip addresses, but since my
router only allows 10 of those I use dynamic (a
Is this an IP conflict what is the IP of router what is the IP of the
SB3.
Or is it firewall antivir problem, sometimes firewalls can be triggered
to block all access when they are unhappy enough.
What did you have before install of 7.2 did you have a version so old
that it was named slimserver
do you use dhcp from the router? - could there be an ip conflict on your
network?
--
Phil Leigh
You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...SB3+Stontronics PSU - Altmann
JISCO/UPCI - TACT RCS 2.2X + Good Vibrations S/W - MF
Triplethreat(A
I checked the MAC addresses and they match, so that wasn't it.
I uninstalled and reinstalled. It seemed to work at first until I went
to look at the configuration on my router, and I couldn't get into it.
So I uninstalled SC and it worked fine.
I have no idea what is going on. I've never had
Yep, the 7.2 download from the site.
Never would have thought to check the MAC address. I'll take a look
and see what's up. Thanks for the help.
BTW, when SC was working properly it was great. I like 7.2. Runs
quick, well thought out.
--
slimman
---
When you say latest I presume you mean the official 7.2 release? That is
the one you should be running.
Check that the mac address (on the label on the underside of your SB)
matches what is in the settings in SC... I recall having the identical
symptoms to this a year or so ago and it turned out
I have installed the latest SqueezeCenter a few times now. I thought
everything was working great until I restarted my computer last night
and the problem was back.
It seems there must be some kind of conflict with SqueezeCenter and
another program on my computer because after I install SqueezeC
11 matches
Mail list logo
