I have the same problem here. I am using v8.03, Windows XP, SP3 , USB
interface RigExpert Tiny, virtuale: COM1 - CAT; COM2, PTT delay 0, DTR =
CW keying, RTS = PTT. When I start a CW keyboard message the FT1000MP locks
on key down. Changes and values DTR and RTS do not give positive result.
V
OS:XP
Brand of Desktop =Dell B110
Real serial on boardTo be sure check in control panel|system|device manager
if the comport is installed ok
normally it should be Yes it is and it works with V7.05/7.04
9600 = Baud
8 bits
None=parity
1 stopbit
None=flow control
DX4WIN SETUP
COMPORT = COM1 (on boa
>Hello
>I have also the same problem : locks on key down (cw via virtual serial
>ports)
>Equipement here :
>Windows XP SP3
>micro keyer II
>Icom 7700
>All work on 8.02 but not on 8.03
>The solution for me, is use now winkey via micro keyer II and all work
!
>Best 73
>HNY
>Yann F5NBU
>www.f5nbu
n-boun...@mailman.qth.net
> [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas Stamatis
> Sent: 05 January 2010 12:57
> To: REFLECTOR dx4win
> Subject: Re: [Dx4win] CW keying issue
>
> Maybe someone with the problem can try this to tell me if it
> works (it worked in
.
73 Kostas sv1dpi
- Original Message -
From: "ON4AOI"
To:
Sent: Monday, January 04, 2010 6:02 PM
Subject: [Dx4win] CW keying issue
> HNY All,
> Like I asked before I like the following info
>>From those that have the keying problem
>
> Example
> OS: VIS
HNY All,
Like I asked before I like the following info
>From those that have the keying problem
Example
OS: VISTA HOME
Brand of LAPTOP = HP DV9700
Real Serial on MB = NO
Real serial via add on board = NO
USB to serial = YES brand GEMBIRD
To be sure check in control panel|system|devicemanager
if t
when the comport is not there or changed when the program is running to a
>> port that does not exist
>>
>> GUY ON4AOI
>>
>>
>>
>>> -----Oorspronkelijk bericht-
>>> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
>>> bou
-Message d'origine-
De : dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
De la part de ON4AOI
Envoyé : lundi 4 janvier 2010 08:50
À : 'Ian Trusson'
Cc : dx4win@mailman.qth.net
Objet : Re: [Dx4win] CW keying issue?
Hi Ian,
The discussion did not end behind
>> -Oorspronkelijk bericht-
>> Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
>> boun...@mailman.qth.net] Namens Ian Trusson
>> Verzonden: maandag 4 januari 2010 3:17
>> Aan: dx4win@mailman.qth.net
>> Onderwerp: [Dx4win] CW keying issue?
>>
>&
n Trusson
> Verzonden: maandag 4 januari 2010 3:17
> Aan: dx4win@mailman.qth.net
> Onderwerp: [Dx4win] CW keying issue?
>
> I have been following the "CW Keying Issue" thread in the archive, but
> the
> thread seemed to come to an end on 28 Dec 2009 without a resolution.
>
I have been following the "CW Keying Issue" thread in the archive, but the
thread seemed to come to an end on 28 Dec 2009 without a resolution.
I have the same problem here. I am using v8.03, Windows 7, USB to serial
converter, COM1, PTT delay 1, DTR = CW keying, RTS = PTT. When I start a CW
keybo
Just as a follow-up, I switched the keying from COM3, which is on an
added-on card to COM1, which is the serial port located on the
motherboard (on the off chance there was something odd about the serial
port drivers) and unfortunately it made no difference.
On 12/28/2009 4:04 PM, David, K2DBK
So has anyone else got any thoughts about the issue with CW keying
locking up in version 8.03? As I posted to this list, I've tried
literally every combination of using CW Keying & PTT on both DTR and RTS
with no luck. I've tried a completely clean install on the same computer
with the same iss
13 matches
Mail list logo
