Re: [Efw-user] EFW Developer Environment Released

ld-pkgs > 8) /var/efw-devel/build-iso /var/tmp/efw.iso > > > - Original Message - > | From: "Igor Mikolic-Torreira" > | To: efw-user@lists.sourceforge.net > | Sent: Saturday, December 1, 2012 1:15:02 PM > | Subject: Re: [Efw-user] EFW Developer Environment Rel

Re: [Efw-user] EFW Developer Environment Released

# ./retrieve-srpms Can't find configuration file - /root/.efw-dev.cfg As best I can tell, the configuration file isn't created until the setup-devel step. Igor On 12/01/2012 12:26 PM, Igor Mikolic-Torreira wrote: > Robert, > > Thanks for posting a new version. I hit an error when &

Re: [Efw-user] EFW Developer Environment Released

Robert, Thanks for posting a new version. I hit an error when running build-pkgs: root@efw-devel-virtual:~ # /var/efw-devel/build-pkgs Installing /var/efw-devel/2.5.1/EFW-COMMUNITY-2.5.1-201201271721/SRPMS/zlib-1.2.3-3.endian1.src.rpm error: cannot create %sourcedir /2.5.1/rpmbuild/SOURCES err

Re: [Efw-user] EFW Developer Environment Released

gt; > tar -xf efw-devel-1.1.tar.gz > > since the one you downloaded wasn't actually compressed. > > I've replaced the tar file with a compressed one to eliminate future > confusion. > > ----- Original Message - > | From: "Igor Mikolic-Torreira" >

Re: [Efw-user] EFW Developer Environment Released

Robert, I consistently get errors trying to unpack your version 1.1. Specifically: $ tar -xzf efw-devel-1.1.tar.gz gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error is not recoverable: exiting now $ I've downloaded it several times and tried difference computers -- alwa

Re: [Efw-user] EFW Developer Environment Released

Robert, Can't thank you enough for this easy to install EFW development environment. I can finally build some add-on packages that complete my EFW set up, and I'm looking forward to updating some of the EFW components. I do have one question for you. When trying to build acpid 2.0.17 (see h

Re: [Efw-user] EFW 5.1 NTP daemon not auto starting - new topic of re-importing configs

My guess is that you are messing up the line endings. Unix and Windows have different end-of-line markers in text files ( vs ). Your Windows archive tools probably auto-convert to Windows format when you expand, but fail to convert to Linux format when you re-build the archive. Igor On Sep 2

Re: [Efw-user] 2.5.1 upgrade

On 02/03/2012 12:08 PM, Davide Cottignoli wrote: > I get a try to upgrade to 2.5.1: > > from 2.5.0 to 2.5.1: upgrade success and the few services I tested works > normally; Did you upgrade using the "efw-upgrade" command? When I try it I get "No interesting upgrades available.". Igor > > from

[Efw-user] EFW 2.4.1: glibc-devel and others missing from DEVEL_RPMS bundle

Hi, I was trying to make an EFW 2.4.1 development box using the source and development RPMs found at the "Source Code" link at: http://www.endian.com/en/community/download/ Unfortunately, the source tar file is missing some key development RPMs, such as: glibc-devel glibc-headers kernel-devel l

Re: [Efw-user] Devel packages for 2.3

Elmar Natter wrote: > 2009/11/29 Igor Mikolic-Torreira >> Actually, there are a bunch of older packages on the >> updates-devel site. For example, EFW 2.3 comes with rpm >> 4.4.2, but the updates-devel site has rpm 4.4.1. This is >> more than a packaging bump (as

Re: [Efw-user] Devel packages for 2.3

Igor Mikolic-Torreira wrote: > Did you notice that glibc-devel provided on the > updates-devel site (glibc-devel-2.3.4-2.39.endian6) is older > than the glibc installed by the EFW 2.3 installer and > distributed as part of the RPMs and SRPMS > (glibc-2.3.4-2.41.endian8) > &

Re: [Efw-user] Devel packages for 2.3

Patricio A. Bruna wrote: > I found the answer my self, all the packages are available on the > updates-devel site. > > Thanks > > > Patricio Bruna V. > IT Linux Ltda. > http://www.it-linux.cl > Fono : (+56-2) 333 0578 > Móvil: (+56-9) 7776 2899 > IT Linux en

Re: [Efw-user] Devel packages for 2.3

Patricio A. Bruna wrote: > Im trying to build a kernel with xen support, do you know how? > > > Patricio Bruna V. > IT Linux Ltda. > http://www.it-linux.cl > Fono : (+56-2) 333 0578 > Móvil: (+56-9) 7776 2899 > IT Linux en Facebook

Re: [Efw-user] Devel packages for 2.3

Patricio A. Bruna wrote: > The username is the email you register with endian and the password is > community > Got it -- thanks! Somehow I missed this. Busy downloading as we speak :) Igor -- Let Crystal Reports ha

Re: [Efw-user] Devel packages for 2.3

Patricio A. Bruna wrote: > You may found it here: http://updates.endian.org/devel/pool/ > You'll need a username, for this go to the comunity site of endian > Patricio, Thanks -- I'm already registered with the Endian community (via http://www.endian.com/en/community/efw-updates/), but while t

Re: [Efw-user] Devel packages for 2.3

Patricio A. Bruna wrote: > I found the answer my self, all the packages are available on the > updates-devel site. > > Thanks > Could you provide a link please. I've looked all over and haven't been able to find them. I can find the source RPMs for 2.3 at sourceforge https://sourceforge.ne

Re: [Efw-user] Announcement: Endian Firewall Community 2.3rc1

Christian, Does 2.3rc1 restore hiddev support (last seen in 2.1.x)? Without it hiddev, it is very hard to support UPS monitoring and automated shutdown in the case of power loss. Thanks, Igor -- Come build with us! T

Re: [Efw-user] Network UPS Tools (NUT) on EFW 2.2

wayner wrote: > Thanks Igor for your response. I can't answer your questions but hopefully > one of the Devs may respond. > > I have given up trying to install nut-client for the moment. I'm still > interested in how others handle power outages - do you just allow a hard > shutdown of the the

Re: [Efw-user] Network UPS Tools (NUT) on EFW 2.2

wayner wrote: > I found the add-on package apcupsd but as I don't have an APC UPS, this wont > work for me. My UPS is an UPSonic which uses the NUT driver megatec_usb. I > would assume that not all EFW users are using APC UPS's - so how do non-APC > users manage extended power outs? > > Some hel

Re: [Efw-user] how-to compile new kernel?

Unfortunately, the kernel source RPMs from Endian for 2.2rc3 aren't complete and I haven't succeeded in building a kernel from them -- they fail just trying to re-build the current kernel due to missing pieces. I think if Endian would supply a complete kernel source RPM, we could then work fro

Re: [Efw-user] USB HID drivers on Endiian 2.2rc3

Mike Tremaine wrote: > Mike Tremaine wrote: >> Igor Mikolic-Torreira wrote: > >>> In reading stuff I found on the net, I've pretty much >>> convinced myself (perhaps wrongly) that the HID driver >>> itself is not loaded on Endian 2.2rc3 (the competin

Re: [Efw-user] USB HID drivers on Endiian 2.2rc3

Mike Tremaine wrote: > Igor Mikolic-Torreira wrote: >> Mike, >> >> Thanks for the suggestion, but yes, both usbutils and libusb >> are present under 2.2rc3. >> >> In reading stuff I found on the net, I've pretty much >> convinced myself (perh

Re: [Efw-user] USB HID drivers on Endiian 2.2rc3

Mike Tremaine wrote: > > I don't want to boot my desktop up to double check [but I will > tomorrow morning], but is libusb installed? Under Endian 2.0 I see a > lot of usb related packages [do a rpm -q -a | grep -i usb ] libusb > seems the most important [usbuitls might also be]. > Mike,

[Efw-user] USB HID drivers on Endiian 2.2rc3

Hi, I working to port apcupsd to Endian 2.2rc3 (apcupsd is a UPS monitor that can trigger a controlled shutdown of Endian if there is an extended power failure). I had ported this successfully to earlier Endian versions (see http://alumnus.caltech.edu/~igormt/endian/extras.html). However, in

Re: [Efw-user] development kit and source code for 2.2-rc3 released

Chris, Much appreciated! I'll be setting up both a 2.2rc3 "test-to-migrate-to-production" machine and a 2.2rc3 development machine this weekend (and how convenient that this is a long weekend :) Igor Chris Mair wrote: > Hi, > > developers, > > as requested by some of you already, on the SF

Re: [Efw-user] Endian address to the community / release 2.2

Chris, Appreciate the 2.2rc3 release and your move towards being more open to the larger developer community. As an important step in that direction, please release the development RPMs for 2.2rc3 (like your earlier EFW-COMMUNITY-2.1.1-devel-RPMS.tar.bz2 release). Such a package is a key ste

Re: [Efw-user] Report on EFW 2.1.2 and clamav 0.93.1 for EFW 2.1.1 from Stellarcore

Mike Tremaine wrote: > > If anyone feels like chasing that down I pushed the file into the > 2.1-updates directory. [I do not have working 2.1 development box > anymore]. But you would want to grab endianclamav.pl and copy it over > the exiting one. If it works ok then grab the efw-clamav sourc

[Efw-user] Report on EFW 2.1.2 and clamav 0.93.1 for EFW 2.1.1 from Stellarcore

Hi, I have tried out the various clamav updates that Mike Tremaine produced for for EFW 2.1.1 systems on my EFW 2.1.2 system. (1) Recommend installing the clamav-0.92.1 (and related) updates on EFW 2.1.2. It works just fine for me. (2) Recommend NOT installing the clamav-0.93.1 update on EFW

Re: [Efw-user] EFW 2.1.2 and ClamAV (attn Mike Tremaine)

Mike Tremaine wrote: > perl-Mail-ClamAV is the perl module that allows an interface into > libclamav. As far as I know it is not used by anything in Endian but > was there for legacy reasons. I would just force the update. [ -- > force ] it will work. The problem with perl-Mail-Clamav is that

[Efw-user] EFW 2.1.2 and ClamAV (attn Mike Tremaine)

Mike, I just am getting around to trying the clamav-0.93.1-0.endian5.i386.rpm (and related) updates from your EFW 2.1.1 web site on my EFW 2.1.2 system. Previous updates for 2.1.1 have worked well on 2.1.2 (both install itself and subsequent performance), but this time the update fails with the

Re: [Efw-user] efw 2.1.2

Mike Tremaine wrote: > You'll also want to edit the clamd.conf.tmpl file because there are > changes in clamav 0.93+ [this are included in the efw-clamav package > BUT this might not be a good thing to install on 2.1+ systems. Sorry > but I never moved beyond 2.0, I'm hoping 2.2 is easier to

Re: [Efw-user] I am lost with new install, help please

Johannes, I've just been reading this thread and you have me completely confused. Do the following: (1) Install EFW into your "box" with no connections -- both NICs have no cables connected to them. Set up the Green IP as 192.168.100.50/255.255.255.0 (2) Connect your internal LAN computer [

Re: [Efw-user] EFW Community

I started trying to capture all the loose contributions and patches I found at little web site I created at http://alumnus.caltech.edu/~igormt/endian/ I would be happy to fold in everything there into something like you suggest. Igor Tarrant Marshall wrote: > I would be happy to jump on bo

Re: [Efw-user] Block download

If you use Patricio Bruna's extension of EFW for Squid custom ACLs, this can indeed done via the web interface. Patricio's info is at: http://clspace.it-linux.cl/clearspace/blogs/pbruna/tags/endian If you prefer, you can get his stuff all packaged and bundled as an RPM at: http://alumnus.calt

Re: [Efw-user] openvpn set up, mobile clients can only reach firewall's internal green NIC address, no other machines on LAN are reachable

I believe this is the OpenVPN routing bug. This has been discuss previously on this list (a search of the arives should find it). A solution also appears at http://alumnus.caltech.edu/~igormt/endian/bugs.html Igor Ron E. wrote: > Dear All, > > Hopefully someone has an idea about this. I ma

[Efw-user] acpid RPM for Endian

Hi, I have packaged Tim Hockin's acpid daemon to work on Endian 2.1.2, and in particular configured it to trigger system shutdown when the power button is pressed. I found it a very convenient feature to have when running EFW Community Edition on a headless PC (no monitor, no keyboard). You

[Efw-user] apcupsd for EFW 2.1.2

Hi, I've adapted and packaged apcupsd for EFW 2.1.2. The apcupsd package allows your EFW installation to communicate with an APC UPS and automatically trigger a software shutdown if the power goes out. I've tested it on my EFW 2.1.2 box; it works fine for me. I've posted it at: http://alumn