I've heard about pfSense but never got into it.
One point for Untangle in my opinion is that it is based on Debian. Being an
Ubuntu sysadmin, I feel right at home. ;)
--
Rafael Fonseca
www.nunca.com.br
On 6/05/2010, at 4:32 AM, Jake Ortman wrote:
>> Just a nice gui, check pfSense
Bear in mind, though, that it required me to upgrade the hardware Endian was
running on to use all of the features. On the same hardware it was
struggling a bit.
--
Rafael Fonseca
On 5 May 2010 11:05, Alberto Ferrer wrote:
> Untable looks better than Endian on many ways, that console... Je
t, coupled with some pretty big
long-standing bugs (in my opinion) made me look somewhere else.
Endian is great at leveraging old hardware for a good all-round solution,
but if you need to step up, look elsewhere.
--
Rafael Fonseca
On 5 May 2010 09:01, Steven Sher wrote:
> I have also been
ing by username.
Since setup, I haven't had any issues with it. I'm considering switching
other clients to it as well.
If you're after Captive Portal, have a look at it.
PS: The interface is a completely different concept, so it takes a little
bit of time getting used to.
Regards
Sounds like someone got access to your box. Check Kernel log for SSH in and out.
--
Rafael Fonseca
On 7/04/2010, at 1:31 PM, Andres Gonzalez wrote:
> I disabled the remote system access and (Firewall -> System Access) and now
> everything is ok ... could be that the apache services
I too would like an ETA, Endian devs. Any news?
--
Rafael Fonseca
www.nunca.com.br
On 17 March 2010 22:18, Fabian Abplanalp wrote:
> Hi
>
> Is there a planned release date for 2.3.1? Or "when it's finish"? For us
> especially the "RBL Bug" is
I would expect so, but I'm not sure on that. Test and see how it goes.
--
Rafael Fonseca
www.nunca.com.br
On 11/02/2010, at 1:04 AM, Wolf Paul wrote:
> Shouldn't need rules if the phones are registered with asterisk -- that ring
> is coming in on the existing connection of
Any traffic that crosses between zones needs rules. From memory, traffic from
green is always allowed to blue/orange. The way back, however, will need to be
allowed for incoming packets from the Asterisk server to ring the phones (not
100% sure on this one, though).
--
Rafael Fonseca
Green if it's supposed to be an internal PBX server. Orange if it's supposed
to be a public one.
--
Rafael Fonseca
www.nunca.com.br
On 9 February 2010 10:43, Vassilis V. wrote:
> Hello all,
>
> I successfully managed to get an Asterisk running behind my Endian
> fire
You probably need to use the SIP Proxy for this, but I don't think it is
possible at all to have an open port without redirecting it to an internal IP.
--
Rafael Fonseca
www.nunca.com.br
On 15/01/2010, at 6:02 AM, jonas kellens wrote:
> Hello list !
>
> How can I open up some U
config file
from dhcpd to make it work. If someone logs into the GUI and restarts the
DHCP through the web interface, the problem reappears.
Hope this helps other people as well.
Regards,
--
Rafael Fonseca
www.nunca.com.br
2009/12/8 Rafael Fonseca
> I've noticed that whenever rules
Any luck getting VMware tools on it? I'm also interested.
--
Rafael Fonseca
2009/11/12 Bodo Olschewski
> Elmar Natter writes:
>
> >
> >
> > I'm using EFW 2.3 in a ESXi Enviroement. Performance is just
> > great but I still miss the VMWare Tools to hav
fic regardless of VPN firewall rules.
>
>
> At 07:03 PM 07-12-09, you wrote:
> >Have you cheked the VPN firewall config?
> >Cheers,
> >Pedro
> >On Monday 07 December 2009 07:58:17 Rafael Fonseca wrote:
> > > I'm getting the same thing. Any news?
> > &g
I'm getting the same thing. Any news?
--
Rafael Fonseca
www.nunca.com.br
2009/11/7 Elmar Natter
> I've just encountered a new problem while switching from 2.2 to
> 2.3. The same config which worked perfect under 2.2 cause a
> problem under 2.3. Now only the router is pi
Maybe your Spam folder got something?
Gmail is known for marking messages from unknown boxes as Spam. I had to
manually add rules to my Inbox to prevent messages coming from my home
server to be sent to Spam.
Regards,
--
Rafael Fonseca
www.nunca.com.br
2009/10/28 Matt Hayes
> Ok, Got
I guess this answers my question about upgrading 2.2 to 2.3 using
efw-upgrade.
--
Rafael Fonseca
www.nunca.com.br
2009/10/28 Christian Graffer
> Hello Community,
>
> As some of you have already noticed today we can proudly announce the
> final release of Endian Firewall C
That's what I'm also looking forward to do. I haven't tried 2.3rc1 on it, so
I'll be going straight from 2.2 to 2.3.
--
Rafael Fonseca
www.nunca.com.br
2009/10/28 Matt Hayes
> Luca Giovenzana wrote:
> > Best option is to backup, reinstall and restore, that'
So what's the procedure to do an in-place upgrade using the update
system? Is it possible at all or do I have to pull out the CD drive
again to perform the upgrade?
--
Rafael Fonseca
www.nunca.com.br
On 28/10/2009, at 5:28 AM, Pedro M. S. Oliveira wrote:
> Well I've just inst
I believe you achieve that by using the Content Filter inside the Proxy
settings. I'm not sure you can block specific words, though. Only
pre-configured patterns.
--
Rafael Fonseca
www.nunca.com.br
2009/8/13 Fellipe Pinheiro - Analista de Redes <
fellipepinhe...@macae.rj.gov.br>
&g
Not necessary in this case. They're for error reporting and tidying up
output from cron-jobs, but in your case I'd just ignore them.
--
Rafael Fonseca
www.nunca.com.br
On 30/07/2009, at 11:19 PM, Vassilis wrote:
> Hello Rafael!
>
> I added the root there since it was there f
Why did you add the 'root' part in front of the script? AFAIK, that
shouldn't be there. Just make sure you chmod 755 the script, and you don't
even need to sh
Do you have 512MBs of RAM?
I've noticed that under 1GB of RAM, Endian shows 50% use. As of now,
the Endian system I'm running has 512MB and it does show almost full
usage of the RAM.
Regards,
--
Rafael Fonseca
www.nunca.com.br
On 6/05/2009, at 6:34 PM, Tunç YURDAKUL wrote:
Hel
If you mean the proxy in transparent mode, then yes.
--
Rafael Fonseca
www.nunca.com.br
On 7/03/2009, at 10:18 AM, Andres Gonzalez wrote:
Can someone please confirm whether, using two network interfaces
(RED and
GREEN), can Endian can operate in transparent/bridge mode?
Regards,
Andres
Same here.
--
Rafael Fonseca
www.nunca.com.br
On 21/02/2009, at 3:37 AM, Allie Syadiqin wrote:
Mike, sounds great. I'll look forward to the demo.
2009/2/20 Mike Knisely
You'll need to make certain that the hardware you have is supported
by the ESX hypervisor. You need s
I'm considering virtualization as the next step for our
infrastructure, and ESXi3 looks like the way to go. I would love to
see how it working, but couldn't get a test server yet for that.
--
Rafael Fonseca
www.nunca.com.br
On 20/02/2009, at 9:51 AM, Allie Syadiqin wrote:
Than
abling the RAID, installing Endian. If it fails, we'll know
it's not the controller. If it doesn't fail, you'll know what the
issue is. :)
Only then can we try and 'fix it'. Maybe with a custom kernel compile,
maybe with a kernel module. But first th
HCP server), and I have this weird feeling that it may be related.
I've added the above line manually to my .conf file and will see how
it goes.
--
Rafael Fonseca
www.nunca.com.br
On 21/01/2009, at 5:53 PM, wharfratjoe wrote:
>
> I just verified that this is an an issue with endian. dom
Even though it's not a solution, your email just made me a whole lot
happier.
I was beginning to wonder what was wrong with my network setup,
routers, etc... LOL!
--
Rafael Fonseca
www.nunca.com.br
On 21/01/2009, at 5:53 PM, wharfratjoe wrote:
>
> I just verified that this is
I have 2.2rc3 with everything enabled on a VDSL2 network with 10Mb
down/2Mb up and I do get full speed. Could it be something with your
modem routing and Endian?
--
Rafael Fonseca
www.nunca.com.br
On 12/01/2009, at 5:12 AM, Vassilis wrote:
> Hello Stéphane,
>
> I am using 2.2rc3 too
So, just to clarify: it's NOT an issue in Endian, but rather on your
outgoing firewall?
I have this issue but on roadwarriors connecting to Endian from
outside the office. The information is pushed, but no name resolving.
--
Rafael Fonseca
www.nunca.com.br
On 9/01/2009, at 11:
Incoming or outgoing?
--
Rafael Fonseca
www.nunca.com.br
On 9/01/2009, at 10:05 AM, wharfratjoe wrote:
>
> Due to lack of sleep it was a firewall issue blicking udp port 53.
> Pushing
> Vpn settings work fine in 2.2 RC3, as seen below
>
> Here is another example that is worki
don't know if I'm
using the optimal settings for Endian.
Regards,
--
Rafael Fonseca
www.nunca.com.br
--
Check out the new SourceForge.net Marketplace.
It is the best place to buy or sell services for
just about
at's because AD treats the Users folder as a Container, rather
than the normal Organizational Unit.
hope it helps.
--
Rafael Fonseca
www.nunca.com.br
On 7/01/2009, at 10:57 AM, Eduardo Silva wrote:
> Hello list,
>
> I just installed EFWC 2.2 rc3 and i'm getting some problems to
It is indeed a somewhat old P4 entry-level motherboard. Running with
512Mb of RAM.
--
Rafael Fonseca
On 16/12/2008, at 6:35 AM, Scott Silva wrote:
> on 12-14-2008 2:26 PM Rafael Fonseca spake the following:
>> Just thought I'd give you guys a follow up to this one.
>>
>
h the same result: 2 sticks = slow down; 1 stick
= fine.
Weird.
--
Rafael Fonseca
www.nunca.com.br
On 13/10/2008, at 12:31 PM, Mike Tremaine wrote:
>
> On Oct 11, 2008, at 1:56 PM, Rafael Fonseca wrote:
>
>> Hi Chris,
>>
>> It didn't completely fail. It ju
That traffic accounting module REALLY interests me.
Let us know when you get a first version out.
[]'s
--
Rafael Fonseca
www.nunca.com.br
On 13/10/2008, at 11:48 PM, Pedro M. S. Oliveira wrote:
I did upgrade my virtual machine from rc2 to rc3 in 5 minutes and
rebooting no pro
Sounds very similar to what I experienced.
Orange became green for me, but it took a while to answer to pings as
well at first.
--
Rafael Fonseca
www.nunca.com.br
On 14/10/2008, at 2:46 AM, woodrowbone wrote:
>
> I had problems connecting to the "green" card after
:/
I have marked you guys' emails for later reference when I attempt the
upgrade again.
--
Rafael Fonseca
www.nunca.com.br
On 13/10/2008, at 12:31 PM, Mike Tremaine wrote:
>
> On Oct 11, 2008, at 1:56 PM, Rafael Fonseca wrote:
>
>> Hi Chris,
>>
>> It didn't
with
nothing to do (g/f working), so I'll take a day to test all the
options again.
I'd rather have RAID on it, but if it slows things down more, I'm
gonna have to dump it.
--
Rafael Fonseca
www.nunca.com.br
On 13/10/2008, at 8:46 AM, compdoc wrote:
>
> Does it bo
RAID, reinstalled onto a single HDD, then restored with a
settings-only backup. Same thing.
Put back the old HDD with 2.1.2, boots fine.
Hardware is a P4 3.0Ghz with 1Gb of Kingston RAM and 4 NICs (1 onboard/
1 3Com/2 Realteks).
--
Rafael Fonseca
www.nunca.com.br
On 11/10/2008, at 9:51 PM, Chris
Quite interesting, in fact. Especially after my failed attempt this
morning at upgrading a 2.1.2 box to 2.2-rc3 which took me more than 4
hours and I ended up reverting.
Something's really weird in the new version: booting a clean system
took more than 15 minutes!
--
Rafael Fo
I'd also like to know the same. I'm planning on that same upgrade
here, but not without taking a copy of the hard-drive first, just in
case.
Anyone that did it already care to shed some light?
--
Rafael Fonseca
www.nunca.com.br
On 8/10/2008, at 4:54 PM, Matt Hayes wrote:
>
, so that I can
add the Active Directory integration for OpenVPN that I use here and
I'm sure users on this list would like too.
Regards,
--
Rafael Fonseca
www.nunca.com.br
On 8/10/2008, at 6:33 AM, Mike Tremaine wrote:
>
> On Oct 7, 2008, at 8:57 AM, Chris Mair wrote:
>
release of 2.2).
--
Rafael Fonseca
www.nunca.com.br
On 12/09/2008, at 5:14 AM, Marcelo Santos wrote:
No matter the brand of firewall you choose to use, the main concept
at an VPN is that the firewall creates a tunnel, and in that tunnel
you can pass any protocol that you pass in a normal ne
Why don't you just turn off the logs then?
--
Rafael Fonseca
www.nunca.com.br
On 29/08/2008, at 11:25 AM, iomega55 wrote:
>
> Hi:
>
> How can I delete the proxy logs in Endian?
>
> I have a user that is generating a lot of records around more than
> 70,000
> re
7;ll wait for Endian, yet again.
Thanks for all the replies.
--
Rafael Fonseca
www.nunca.com.br
On 24/07/2008, at 12:53 PM, Mike Tremaine wrote:
>
> On Jul 23, 2008, at 5:28 PM, Rafael Fonseca wrote:
>
>> Since the updates of 2.1.2 we have had random occurrences of this
>> me
/var.
Regards,
--
Rafael Fonseca
www.nunca.com.br
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is
It seems your Squid settings have the 'Offline mode' enabled. It's
under Proxy > Cache management. This is 2.1.2. It may differ to other
versions.
<>
--
Rafael Fonseca
www.nunca.com.br
On 22/07/2008, at 9:05 AM, <[EMAIL PROTECTED]> <[EMAIL PROTECTED
Bless you!
--
Rafael Fonseca
www.nunca.com.br
On 21/07/2008, at 11:17 AM, Mike Tremaine wrote:
>
> On Jul 20, 2008, at 4:11 PM, Rafael Fonseca wrote:
>
>> I've been noticing these messages every few minutes in the SMTP logs:
>>
>> spamd[4145]: Can't loca
i386-linux-thread-multi /
usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/
vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/
5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.
Anyone seen them as well?
--
Rafael Fonseca
www.nu
Screen is a program that allows you to run multiple programs (or
shells) in the background. Kinda like a window-manager, but text-only.
--
Rafael Fonseca
www.nunca.com.br
On 17/07/2008, at 5:40 PM, Gregory Machin wrote:
> What is screen ?
>
> Rafael Fonseca wrote:
>> Anyone g
Anyone got squidview to open at startup. Love the tally function.
If only I could get screen to install, but when it comes to RPM-based
distros, I fail!
Zola-3 wrote:
>
> hi
>
> glibc:
> http://schwarzecker.homelinux.net/index.php?option=com_remository&Itemid=28&func=selectfolder&filecatid=43
Much appreciated!
Scott Silva wrote:
>
> on 7-15-2008 2:00 PM Rafael Fonseca spake the following:
>> Can anyone please post the full contents (or attach)
>> /etc/init.d/spamassassin
>> as a reply to this message?
>>
>> My version of this
Can anyone please post the full contents (or attach) /etc/init.d/spamassassin
as a reply to this message?
My version of this file seems to have gone missing and
restartspamassassin.py is complaining about it.
Thanks in advance!
--
View this message in context:
http://www.nabble.com/Request-for
Howdy!
I just came across this Dynalink ADSL PCI card that I think would make a perfect
addition to my Endian box, but first wanted to check if it's actually supported.
The model is ALH-181. The card is here:
http://www.dynalink.co.nz/cms/index.php?page=adsl-internal-modem-alh181
Anyone knows an
yylaw <[EMAIL PROTECTED]> writes:
>
> I have installed the following packages:
> clamav-0.92.1-0.endian5.i386.rpm
> clamav-db-0.92.1-0.endian5.i386.rpm
> clamav-devel-0.92.1-0.endian5.i386.rpm
> havp-0.86-3.endian8.i386.rpm
> perl-Mail-Clamav-0.20-1.endian0.i386.rpm
> perl-Mail-Clamav-extras-0.20
Gustavo Villaran <[EMAIL PROTECTED]> writes:
>
> Hi, i just changed to the las stable version and is not working good,
> havpd have some strange behavour,
> and the box takes like 20 minutes to fully startup, the proxy logs are
> not working also.
>
> anyone knows how to correct this situation
ajh <[EMAIL PROTECTED]> writes:
>
>
> Hi!
>
> If I enable virus checking on the HTTP proxy, then no one can access any web
> pages. Off - it's OK. I've had a look at the HAVP log and can't see a
> problem. In the clamav log this appears:
>
> squid[14306]: Squid Parent: child process 14308 exit
I don't know if this was covered before, but I've searched through the
knowledgebase and the bug tracker and could not find an answer: does the
upcoming stable release of Endian support opening ports between two zones
without a set destination IP?
I have an FTP server on one of my zones (orange) w
59 matches
Mail list logo
