Yeah, I know this subject has been kicked around for a while, but none
the
less. When I built the K2, I had no trouble getting the 10W out on 10M.
1) I have rewound T2 and elevated it above the board 1/16 inch.
2) Band Power at W6 Measured output.
Greetings from a newbie K2 builder. I am currently building #5390. Into phase 3
now, somewhere in the early stage of the rf board. Don't get too much time for
this detailed work and my xyl has made me clear out the spare bedroom in our
apartment (aka construction area), as she does not seem to l
Have KXPD1 paddle for KX1 will ship CONUS for $50
4mos old used once in the field.
Steve/n0tu
__
QRP-L mailing list
Home: http://mailman.qth.net/mailman/listinfo/qrp-l
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[EMAIL PROTECTED]
Very cool indeed. I've looked at / longed for one of those keys, but
it's a bit rich for my blood.
Yes, let us know how it is.
Diana should pick a time and schedule to be on the air. If she lets us
know in advance, she night end up with a 5 wpm pile up. Now wouldn't
that be cool. The tie to M
I'm clueless but can offer an observation for you to laugh at and
ignore.
On 10 meters, -29.3 DBM yields 2.0 watts while -26.7 yields 5 watts.
The change in drive level is about 3 dB which is twice the power so that
looks like what I'd expect.
On 20, the change is about 6 dB or 4x power and you
Is on the air. Third qso was vi9ni on 40m. Guess it works.
Pat N8VW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailm
So, how do you do it? I originally set mine up to use all BNC
plumbing, tees and female barrels with a right angle at the end. This
is giving inconsistent result, presumably because of inaccuracy in
spacing and stress on the plumbing. Today we've been trying various
combinations of stubs to the pl
Jim,
There are 3 stages of RF amplification in the transmit chain between the W6
jumper and the LPF, you will have to refine the search a bit - right now,
all I can say with certainty is that the problem lies between W6 and the
LPF.
I would suggest checking all the components in the base circuit
Hi all,
I frequently use XIT as a way to quickly move off frequency to re-tune
the auto-tuner. I just leave the K2's RIT/XIT offset control set fully
clockwise (or counterclockwise). Then, when I want to re-tune the ATU,
I turn on *both* RIT and XIT first. This is equivalent to moving the
VFO
I just finished building the XG1 and it works great.
Has anyone put it in an Altoids box??? Will it change the output
characteristics?
Thanks
DE KEN K1UM
PS My KX-1 PROJECT IS ALMOST READY FOR PHASE 2 TESTS...
___
Elecraft mailing list
Post to:
No need to do, Bart,
They have forgotten to put the errata into the kit. This happened first time
and I got an alarm message immediate from Elecraft to add it to my stock
kits. Normaly the erratas are in the kit.
73 de Peter, DL2FI
www.qrpproject.de
> -Ursprüngliche Nachricht-
> Von: [EMA
Wyn,
I have an antique Hallicrafters HT33A with a PL172 tube, and I
modified it so it will accept lower drive. Right now when I drive it
with about 20 watts from my K2/100 in PSK31, I get about 400 watts
out. That's a gain of 20 times, or 13 dB. The tube input is swamped
with a 50 ohm res
Thanks for the great tip, Wayne!
Bill
K9YEQ
K2-35 & 5279; KX1-35/3080
___
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, su
On Jun 8, 2006, at 9:33 AM, <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
wrote:
I am working on an building a "Novice Special" 12 watt transmitter
- think 70s qst - uses a 6c4 and a 5763 tube. After I get the base
transmitter working, I want to replace the Crystal with a DDS vfo
similar to t
On Jun 7, 2006, at 9:13 PM, David A. Belsley wrote:
Needless to say, this is not a procedure recommended for pcbs or
for delicate or breakable items, but for things like jacks, plugs,
switches, and whatever, it seems to be a nice way to go without
heating up the Hakko.
I've been doing th
For awhile, I've been experiencing a down shift of about 200 hertz, but
rarely and randomly in my K2 serial 0063. It's enough to change the
characteristic tone in the receiver and degrades from the filter settings.
Any suggestions as to where to start looking? Doesn't seem to be
temperature-depe
And to think
the casual observer would see the Elecraft genre as only about a really cool
cadillac of a portable rig that you can build. IMHO, the fact that it is a
catalyst of imagination, bringing together ideas of things to try, wether it be
vintage tube (valves for those of you across th
Peter,
No need to do, Bart,
They have forgotten to put the errata into the kit. This happened first time
and I got an alarm message immediate from Elecraft to add it to my stock
kits. Normaly the erratas are in the kit.
'Normally' being the key word here. Apparently they can't keep up at the
mo
18 matches
Mail list logo