A friend of mine recently retired and has expressed a desire to learn
code (International Morse). I hope that someone on this list may have
taught code as part of an Amateur Radio class and will have a
suggestion of a good software package that my friend could use.
MikeW5FTD
___
If you're anticipating a treat when you get your hands on a K3 to operate
for the first time, you'll be blown away with two of them in a SO2R
configuration. I ran two K3s tonight in the NCCC Sprint and experienced yet
another level of operating pleasure. Incomparable. Prior to this, with the
K3
Typical of news reports, the media seems to concentrate on the
sensational. Certainly, the proliferation of throw-away consumer
electronics ending up in landfills is a grave concern for adding to the
lead content of our environment, and I applaud the efforts to keep that
to a minimum.
But, c
A recent Associated Press article discusses a topic that's received much
attention on this reflector: the negative consequences of
environmental restrictions on lead in solder for electronics. The
primary concern the article mentions is that tin, when in an alloy
absent of lead, promotes the
In a message dated 10/18/2007 5:25:18 P.M. Pacific Daylight Time,
[EMAIL PROTECTED] writes:
I have all but about the 1st 20 QST's, so can supply a
quality copy if that will help.
Will need the issue to locate the article.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
_
Joe,
Easy - go into the menu, select ST L, then press EDIT to edit the
parameter. Tap DISPLAY to toggle the sidetone source. When you hear
sidetone, stop tapping DISPLAY.
73,
Don W3FPR
Joe Fowler wrote:
Well, I did it. While playing with my K2's menu, I killed my sidetone. Any
Ideas? Tnx
Well, I did it. While playing with my K2's menu, I killed my sidetone. Any
Ideas? Tnx Joe
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://m
Test. Please disreguard. KF6HAP
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
So is anyone else in the process of building a K3? It's been kind of
slow on the reflector the last couple of days, so several people must be in
the process of construction.
Stan Rife
W5EWA
Not sure which wave...just ordered
_
I have all but about the 1st 20 QST's, so can supply a
quality copy if that will help.
Will need the issue to locate the article.
73! Ken Kopp - K0PP
[EMAIL PROTECTED]
or
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
Y
Hi,
We've been receiving a flood of emails lately asking questions about K3 shipping
and what we're up to here in Aptos. I apologize that we can not reply to all of
them as we're totally focused on getting K3s out the door.
We are slowly ramping up in fits and starts and definitely have shipp
Remember that the K3 is designed to be built and options added by even
inexperienced builders. Each Option manual assumes that installing it is
the FIRST time that Ham has ever opened the lid of a rig. Elecraft takes
seriously the idea of promoting "Hands-on Ham Radio" not just for solder
jocks, b
I am looking for the WARC bandpack parts for the HW9 tranciever, or a parts
radio.. Thanks, John KF7OM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsu
Google is your friend ... a search for "Tuna Tin Transmitter" yielded
http://www.qsl.net/k0kp/hbrew/tt2.html as the first reference. From
that page you will find a link to the schematic (appears to be a scan
of the original in QST): http://www.qsl.net/k0kp/hbrew/tt2/tt2_sch.html
The K0KP w
Golly..!
You guy's are just amazin'.. WHAT A RESPONSE ..just like bein' in a
"pile-up"... ! Took about 5 minutes then the QRM started..!
Glad to say that many of you came thru on this for me.. and I now have the
information I was looking for.. Infact I HAD the original
QST issue with the articl
> Anyone can edit the page, but if you are going to do that, please
read > the policies and style guide. First thing would be an appropriate
> encyclopedic entry for Elecraft.
In particular noting that:
- Wikipedia is not a primary source, so everything you say must be
supported by reliable e
Matt Palmer wrote:
Having some minor problems here, mainly the external speaker jack does
not fit the hole in the case, not even close.
I found that I had to screw it into the panel hole.
--
David Woolley
Emails are not formal business letters, whatever businesses may want.
RFC1855 says there
Guy's...
This might sound REALLY "out of this world".. BUT..
In all my QRP Library publications,..AND most places I've looked, I just
can't find the original schematic circuit diagram for our very own Doug
DeMaw's ORIGINAL Tuna Tin Tx'er..
Yep.! There's plenty pics of folks creations from the d
A little elf whispered in my ear about my errant facts regarding the number
of cover screws necessary to remove/install when adding an option to the K3.
Despite my undergraduate degree in mathematics I can't count correctly.
Lest I leave people with the wrong perception about the K3 screw count, le
Anyone can edit the page, but if you are going to do that, please read the
policies and style guide. First thing would be an appropriate
encyclopedic entry for Elecraft.
BTW, I am a registered Wiki editor. Properly done, this is a significant
endevour.
--
Clark B. Wierda
N8CBW
> Someone who is
I've built two K3's in the past five days from production kits just as they
are shipped to customers as part of an extended field test deployed by
Elecraft. This is another example of Elecraft's diligent focus on their
customers and quality across the range. Not surprisingly, K3 customers will
be
Hi gang,
Someone who is registered with Wikipedia should add
the Elecraft K3 to this list:
http://en.wikipedia.org/wiki/K3
Thanks & 73,
Jeff
NE2J (formerly WB5GWB)
http://www.qsl.net/liqrp
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
Yo
What is that? - Wave goodbye to it being here soon :-(
Disappointed
On 18/10/07 19:46, "Darwin, Keith" <[EMAIL PROTECTED]> sent:
> - K3 Wave 3 -
--
If a man will begin with certainties, he shall end in doubts; but if he
will be content to begin with doubts, he shall end in certainties.
-Fr
Sorry to clutter the list with this, but I figure I should finish the story.
The mast arrived Wed. It was not boxed at all, just shipped in its carrying
bag. It survived the trip to VT just fine. 12 Pieces, each 48" long, yielding
44 feet of mast length.
So be warned, the goods are good bu
Look - we got a beautiful full size glossy photo of
Lisa Jones out of the deal. How much further behind
could the rest of the good stuff be? ;-)
Yes, that K3 went to a close associate who will be
taking it to exotic places I'm told. And they keep in
VERY close contact with him. They want rollout (
I'd love to hear a K3 on the air! Anyone got one going yet?
Rob WB1AEX
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Elecraft_K3/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://g
> I only know of one delivered K3 (#66) - there must be more out
> there - I really hope there are more out there!
#66 went to a "beta tester" who was to build it and give comments. I
personally think that was the only one that shipped last week, or if more
did, that they went to a small number o
I agree- can we all get to see the vid?
I only know of one delivered K3 (#66) - there must be more out there - I
really hope there are more out there!
On 18/10/07 13:52, "Julian G4ILO" <[EMAIL PROTECTED]> sent:
> Any chance that this is available on YouTube or somewhere for those of
> us who we
Any chance that this is available on YouTube or somewhere for those of
us who weren't present?
Those first K3 owners must be having an absolute ball, to keep them
from posting reports to the reflector...
--
Julian, G4ILO K2 s/n: 392 K3 s/n: ???
G4ILO's Shack: www.g4ilo.com
Zerobeat Ham Forums: w
Eric
Many thanks for your video link talk and question/answer session on
the K3.
I'm sure it was appreciated by everybody in the room, which was
packed out.
I'm looking forward to reading reports back on the working K3s which
should start very soon.
73 Robert G3RCE (K2/100, 5219)
_
30 matches
Mail list logo