For Sale in Europe QRP CW transceiver K2 SN 2745.
290 Euro plus shipping.
73 Val LZ1VB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
That's what I thought too - good upgrade . maybe it just has not
happened to you yet!
73 HankK8DD
Hector Padron wrote:
My upgrade to the latest FW 3.30 and DSP 2.26 was smooth and easy as all
the other Beta ones and it works perfect,no distorsion,audio is
practically the same
John wrote:
At 09:47 PM 06/09/09, you wrote:
spilled beer on the keyboard (but I have a couple spares)
referring to beers I hope.
k7up
Fortunately both.
73HankK8DD
Receive Notifications of Incoming Messages
Easily
Fix needed?
This happened to me during the TN QSO party - I was on 80 cw trying to adjust
the antenna tuner when it hit - it was loud - no volume control, no signals -
Thank
God I wasn't running my headset thought it was going to blow the speaker.
I shut rig off and turned it back on and
Well its been a week installed and using the radio daily has nothing
wrong,the fact that it happened to you don't mean that will happen to
us.
AD4C
The difference between genius and stupidity is that genius has its limits. --
Albert Einstein
--- On Mon, 9/7/09, .k8dd. k...@inbox.com wrote:
There are a couple of choices. I chose to use a 15-pin Y connector and
plug a microHAM cable on one side of the Y and a Top Ten Devices Band
Decoder on the other. Another choice is a little breakout board with
connectors for leads. And of course you can make up your own cable.
All of these have
Make sure you CC supp...@elecraft.com when you have issues to be sure
someone see the problem.
I was one of the first people to report this same issue with the last
revision of the beta and on my second post I included support which
elicited a response on the weekend and they started working on
Digital scope screen shot of a K3's dit
http://www.wd1v.net
73,
John Seney, WD1V [fn42]
http://www.wd1v.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
You're right - the 3.30/2.26 NR, although it is slow, it is really good
once you find the setting that works best for the situation. And
although it cannot be readily duplicated, it is still a problem that
would most likely cause those who have had it happen to see it as a
major problem,
and
Yeah, I guess that sometimes we forget what the role of a beta tester
is. It's not to be the first one to have the new software. When you
are a beta tester, which you are if you load beta software, your role
and responsibility is to report problems and not to complain about
them. No
If anyone experiences a loud noise blast from your K3 when running the
latest Beta code, it would help us immensely if you could supply the
following information:
1) Was NR in use?
2) If so, what was the NR setting (NR ADJ value)
3) Does the noise go away if NR is turned off?
4) What were
Lyle,
Most of us understand that we are beta testers and what our
responsibilities in that role are.
We appreciate what you are doing and I will repeat again that the new
NR function is awesome -- better than anything else out there by a lot.
We are all anxious to help solve the noise
I am done with Heil headsets.
I have had 3 that had failures in the wiring, impossible to fix on my own.
Headphones: SONY MDR 7506, Elecraft hand mike.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hello all,
The K2 is still for sale, Now only $800.00!!
I am wanting to buy a K3 and need to sell my loaded K2.
The serial # is 3644. I have used the rig for receive only as I never finished
the transmitter alignment.
My ears could not discern a difference in tone. The soldering is
Go to your local audio store and get a Sony MDR-V150 for little less than 20
bucks and those will last forever and sound better than the Heil ones,that's
what I have been using for about 8 years now.
AD4C
The difference between genius and stupidity is that genius has its limits. --
Albert
I was operating in the TN QSO party on 80m last night in Diversity mode with
headphones on. I'm not sure what I did but I got a huge continuous blast in my
right headphone. I couldn't get the headset off fast enough. I did a power on
reset and it cleared. I don't remember if I pushed NR or
Lyle, it has happened to me once after upgrading to 3.30/2.26. My AGC
settings were at default and I did not have the NR on. I was on CW with my
500hz roofing filter engaged as FL2. When I pushed the filter button to go
back to FL1 the noise blast hit.
73, Bill nz0t
--
View this message
Hi,
I gave a test to my PSK31 setup today - barefoot K2 #5932 with M-Audio sound
card in my desktop pc. My laptop pc was connected to a FT-840 and listening.
Both used old good DigiPan.
I let my laptop measure IMD and also asked for this value during QSOs. In
all cases it's about -16dB which is
Welcome to the K3 world Jim. I have used the one transistor interface
from the MMTTY help files built into a D plug. It uses 1 x NPN
transistor (any small signal one will do), 2 x resistors and 2 x diodes.
I no longer use the MMTTY program but recall not needing a PTT
connection, only the FSK one
On 5 Sep 2009, at 8:39 PM, Johnny Siu wrote:
Fourthly, I had used the entire IC756 family (i.e. IC756 original to
latest IC7600). I fully understand how this family has been
evolving. Similarly, I notice improvements of K2 and K3 throughout
the years. My first K2 is #1146. My K3
On Mon, 7 Sep 2009 09:49:25 -0700 (PDT), Hector Padron
ad4c2...@yahoo.com wrote:
Go to your local audio store and get a Sony MDR-V150 for little less than 20
bucks and those will last forever and sound better than the Heil ones,that's
what I have been using for about 8 years now.
AD4C
[snip]
http://akqg2.2pycn.servertrust.com/iHearSafe_0153_Headphones_p/hp0871s.htm
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Ralph k1...@comcast.net
To: elecraft@mailman.qth.net
Sent: Monday, September 07, 2009 1:32 PM
Subject: Re: [Elecraft] K3 huge noise
I was operating in
The difference between the brands, sepic wise will never be night
and day. You cann't call any of one brand, junk.
The big difference between them all is company philosophy. Elecraft
builds on what they have already made. Even if the others do offer
frimware up grades here and there. The
Dick,
That current is definitely too high (except on 20 meters).
The most common cause for that symptom is the Low Pass Filters. Do
count the number of turns on the toroids in the LPF area - count each
pass of wire through the center of the core as one turn. I believe you
will find you have
Oleg,
With the K2, you should have zero ALC bars illuminated - reduce your
audio input level until the ALC bar does not illuminate.
Are you using SSB mode? If so, have you set the menu SSBC parameter to1:1?
You can set up the RTTY filter set (turn RTTY=ON in the secondary menu),
and you will
I've been stuck for a couple years now with a Whirlpool Duet front loading
washing machine. The internal MCU and switcher power supply trashes entire HF
at S9 +10, I have to use an MFJ-1026 to remedy this. Whirlpool Duet and Maytag
Neptune are notoroius for this with no known sure fire remedies
Don
Read down through this thread. You might want to contact this guy.
http://lists.contesting.com/_rfi/2005-02/msg00041.html
Steve
N4LQ
n...@carolina.rr.com
- Original Message -
From: Don Rasmussen wb8...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Monday, September 07, 2009 10:23 PM
On Mon, 7 Sep 2009 19:23:45 -0700 (PDT), Don Rasmussen wrote:
I've been stuck for a couple years now with a Whirlpool Duet front
loading washing machine. The internal MCU and switcher power supply
trashes entire HF at S9 +10,
Your post is timely. As it happens, there are two recent threads
On Mon, 7 Sep 2009 19:23:45 -0700 (PDT), Don Rasmussen wrote:
I've been stuck for a couple years now with a Whirlpool Duet front
loading washing machine. The internal MCU and switcher power supply
trashes entire HF at S9 +10,
Your post is timely. As it happens, there are two recent threads
29 matches
Mail list logo