Hi all,
I don't know if crossposting with the Yahoo thread is allowed, but i'll do
it only once.
I have been FO/F5LCI on Hao atoll, 900 KM east of Tahiti, in the vast
Tuamotu archipelago (more
precisely BH91nv) during 3 months, and I have made circa 300 QSOs (200 in
CW,
100 in JT65). Not a
Thank you very much! I also like the idea of having another different choice
for the key, to have it send CW while still in SSB mode, as others have
mentioned.
Josh
Sent from my iPad
On Oct 24, 2012, at 7:45 AM, Wayne Burdick n...@elecraft.com wrote:
I'm curious: Would it be possible to
On Oct 24, 2012, at 4:47, Josh Lehan krel...@krellan.net wrote:
I'm glad you have an accessory cable kit available. Finding good 3.5mm
to 2.5mm adapters that actually work seems to be unusually difficult.
Most of them are made for cellular headsets (4-pin), not stereo
headphones (3-pin). I
I have 2 items for sale both are essentially new and purchased recently. I
bought them to check em out, did so, then put em back in their boxes. Both
perform as designed and are excellent items but just won't get used in my shack
so I'm passing them on.
I'm pricing them below my cost at $150
The INFO 080 message means that the MCU (Control Board U1) is not
communicating with some other firmware IC over the AUXBUS signal line.
The only other controller that is present at this stage of your build is
the MCIO in the middle of the RF board.
I would suggest that it is a solder
Ariel,
I would think your K2 finals are OK (for now).
My best guess is that you have a KPA100 and a static charge has damaged
diodes D16 and D17 in the KPA100. If you do not have the KPA100, then
you most likely have the KAT2 and the diodes are D1 and D2 - the same
principle applies.
To test
I have a brand new Signalink with cables for K2 for sale. Digital modes not my
cup of tea.
$95 shipped in original box with cables, manuals etc.
Reply off list to
steve...@shoreham.net
---
Steve Roberts-W1SFR
Sudbury, VT
The items are no longer available.
73s Jim, W4ATK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
My encoder failed and I received a replacement. As I did not build my K3, I
need step-by-step instructions on how to replace it.
Since the contest is this weekend and I left this to the last minute, I need
help quickly. No problem responding off-list.
Thanks to one and all.
73, Dick WN3R
Thanks to Jim, Vic and Don for the return comments
I disconnected the KPA100 and put on the K2 top with the KAT2 ATU. With the K2
ATU connected and the dummy load connected - the SWR correctly reads 1:1 with
menu set for CALS. With the menu set to CALP, the power levels appeared to
modulate
What is the availability date for the KXBC3 trickle charge mode
(automatically switch over to trickle charge when charging is completed)?
73, Heinz HB9BCB
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-KXBC3-Trickle-charge-mode-tp7564557.html
Sent from the
Ariel,
Do not be too quick to conclude that there is something wrong with the
base K2. The basic K2 uses only an RF voltage diode to display the
power output, and it may not be exact - it depends on the load and may
vary from band to band - if it only off by a watt or two, then all is OK
Hi Dick,
On our web site you'll find the manual for installing the DVR module.
It includes instructions on removing the front panel.
Once the panel is off, look at the VFO A encoder module. Make sure it
isn't unplugged (due to its hardware becoming loose). If that's the
only problem, plug
Dick,
The easiest way I can give you instructions for getting to the encoder
backside is to tell you to follow the dis-assembly instructions in the
K3 DSP Low Pass Filter mod kit instructions. You can download from
http://www.elecraft.com/K3/mods/K3_DSP_LP_Filter_Install_Rev_A.pdf.
Of course
Does the XG3 have the stability and output power to be used as a VFO for older
(1950-60s) CW and Phone rigs like the T-50, DX-40, etc.?
Are there software programs that have been written that allows VFO operation?
Lee - K0WA
In our day and age it seems that Common Sense is in short supply.
Lee Buller wrote:
Does the XG3 have the stability and output power to be used as a VFO
for older
(1950-60s) CW and Phone rigs like the T-50, DX-40, etc.?
Yes, with appropriate level conversion, and possible filtering (the
output of the XG3 is closer to a squarewave than a sinewave, so a
Follow on question...
What type of signal (wave?) does a crystal, as used in old rigs like the Eico
720, produce? I am thinking that the oscillator of something like in the 720,
would clean up the output of the XG3 a little bit. I was actually thinking of
using the XG3 as a crystal
A crystal oscillator generally produces something approaching a
sinewave, with varying degrees of harmonic distortion depending on how
much output power the designer was trying to get out of it.
The XG3's signal is quite stable as it is derived from a crystal
oscillator. But its output will
Thanks for the quick answer. This may be a winter project.
PEH's iPad
On Oct 25, 2012, at 10:28 AM, Wayne Burdick n...@elecraft.com wrote:
A crystal oscillator generally produces something approaching a sinewave,
with varying degrees of harmonic distortion depending on how much output
I will check and reheat soldering points as suggested, probably later this
evening when I'm back home from work, and post how things go. Thanks for
the quick suggestions!
--
View this message in context:
The XG3 cannot be tuned by 1 Hz steps, the resolution is a function of the
operating frequency but generally it is within 24 Hz of the selected
frequency. If your VFO application does not require this accuracy, the XG3
may be a good choice. However as Wayne outlined, proper filtering would be
I don't see that on the Elecraft product list and a search of their
web doesn't find anything.
What is it?
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 25 Oct 2012 22:43:23 +0530, Nand Kishore vu2...@gmail.com
wrote:
Any news on ready to ship date.
Nandu
Appears to be bad BNC-BNC cable that was supplied with P3. Easy to replace.
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
10m preamp - TBA
David
KD4NUE
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N5GE
Sent: Thursday, October 25, 2012 2:04 PM
To: Nand Kishore
Cc: elecraft
Subject: Re: [Elecraft] K3-PR10
I don't see that on the Elecraft
OFF the Elecraft List,,,
If the tuner is still available I will buy it from you.
Thanks
Nels Nelsen
NE7LS
On Thu, Oct 25, 2012 at 5:08 AM, Pete Meier pme...@me.com wrote:
I have 2 items for sale both are essentially new and purchased recently.
I bought them to check em out, did so, then put
I asked about 2 weeks ago and Lisa said they are building inventory before
listing it on the order form. It is a 10 meter preamp, similar to the PR-6.
God Bless 73!Jack - WE5ST
From: N5GE li...@n5ge.com
To: Nand Kishore vu2...@gmail.com
Cc: elecraft
This is perplexing. Why not have a PR10/6 where both bands are in the
same unit? Surely that is possible.
73 de Brian/K3KO
On 10/25/2012 20:07, Jack Berry wrote:
I asked about 2 weeks ago and Lisa said they are building inventory before
listing it on the order form. It is a 10 meter
That would make the most sense for sure and save some space as well.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian Alsop
Sent: Thursday, October 25, 2012 3:11 PM
To: elecraft@mailman.qth.net
Subject:
Hi Mic
The IF is 8.215, so the image will be on 44.68MHz. Or listening on
44.676, the image will be on 28.246. Does this explain it?
BTW, I found that the main rx had quite good image rejection, but the
subreceiver is not so good. I designed a filter for the subreceiver to
deal with this -
We started with the PR6. We didn't know anyone would ever want a PR10
until last year. A two-band unit might be possible, but it's not in
our plan (yet).
73,
Wayne
N6KR
On Oct 25, 2012, at 1:10 PM, Brian Alsop wrote:
This is perplexing. Why not have a PR10/6 where both bands are in the
Wayne thanks for the consideration of the 2 band unit. It's things like
these that make Elecraft such a great company.
73,
Fred/N0AZZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Thursday, October 25,
In process of building an older K2 kit, SN 3943. I'm at the Part 1 alignment
page 42 - the optical encoder test.
Status: All ok to this point with display reading 40M 7100.00c and VFO A
However, the indication does not change when turning the VFO knob. I've
verified per the steps in
Hi all,
I am trying to configure WriteLog to communicate with my K3 (with a US
Interface Navigator). I'm having no luck. I am sure I am just missing something
simple. Is there a setup guide for dummies GRIN?
Thanks ns advance,
Chuck, WØBBO
Cecil,
I suggest you check the soldering on the front panel board, be
especially aware that on all ICs pin 1 is soldered, that is easy to miss.
Check the schematic for the front panel board and look at the symbol for
the encoder. Measure to make certain you have 5 volts on the 5 volt pin
How about some user reports from the new KAT500 users?
73
jim ab3cv
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
End of first paragraph - should be ohms instead of volts.
73,
Don W3FPR
Cecil,
I suggest you check the soldering on the front panel board, be
especially aware that on all ICs pin 1 is soldered, that is easy to miss.
Check the schematic for the
When will the KAT500 be shown on the Products page ?I see a lot of talk and I
may want to purchase one but where is the data published?Ciaode Bill-w7kxb . .
__
Elecraft mailing list
Home:
Boy...I was thinking of buying a PR-6 soon. I'd buy a dual band unit in
a heartbeat.
On 10/25/2012 3:59 PM, Wayne Burdick wrote:
We started with the PR6. We didn't know anyone would ever want a PR10
until last year. A two-band unit might be possible, but it's not in
our plan (yet).
73,
Bill,
It is on the order page, but not yet on the Products page. It should be
moved to the products page soon (I have no inside information to say when).
73,
Don w3FPR
On 10/25/2012 8:47 PM, Bill Harris wrote:
When will the KAT500 be shown on the Products page ?I see a lot of talk and
I
Don
The K2 with the ATU behaves as expected - internal meter agrees well with the
external meter, current draw is as expected, and so forth for various power
levels up to 10watts checked out. It was connected to a dummy load.
Without the ATU and the dummy load connected to the base K2
40 matches
Mail list logo