Not wanted here. I already have the best rig ever: K3/100 thank-you.
'73. 2E0BWQ.
If you have nothing good to say, say nothing!
Sent from my iPad
> On 31 Jan 2014, at 21:19, David Gilbert wrote:
>
>
> Spending development effort, time, and money on a product for a limited or
> highly compe
Well, I may be pouring cold water. Compared with HF radio, high end multimode
VHF/UHF radios is of much less demand.
The current XV transverter series with K3 is also not quite a solution for
serious V/U operators especially digital mode user. Frequency and power
stability of K radio + XV tra
Done
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-P3-tp7581595p7583559.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listin
I would appreciate any ideas and/or suggestions regarding the following
problem, please, especially from K3/100 users with a SPE 2K-FA amplifier:
I am running a K3 with the SPE 2K-FA amplifier and sometimes when I am in S & P
mode, I call a station as 'G4BUE' and they answer me as 'F4BUE'. It
You haven't mentioned this, Chris, but have you tried resetting the K3
to factory settings (after saving your configuration with the K3
Utility, of course)? Also, reloading the latest firmware to the K3 might
help. The latest firmware is MCU 4.67, DSP 2.81, FL 1.15.
73 de David G4DMP
G-QRP 11046
Hello,
I have built the first prototype of my interface and everything works very
well!
It opens to me a new dimension in the use of the KAT500, via serial commands
and Arduino microcontroler.
What I have done is :
Arduino TTL serial TX/RX connected to a classic MAX232 IC (TTL pins)
MAX 232 TX/R
Back in volume 117, issue 39 there was some chatter about having no output
power from a K3. Whatever became of that issue? I have seen nothing since.
I have a K3 that has no output power. If I key the rig while listening
with an external receiver, I can hear what I am keying on the frequency th
Hi Gary,
You didn't indicate if you are running split or diversity. Here's a solution
if you are in diversity.
There are times that you would like the RX ANT to be steered to both your
MAIN RX and SUB RX. I do that with a splitter on my RX antenna cable. One
leg goes to the AUX RF BNC socket for
David,
Its a Hi-Z Triangular array, it is only a rx antenna, not for
transmit. Used to be sold by Hi-Z themselves but now sold are now
sold albeit at a higher price by DXEngineering. You can read about
their antennas here: http://www.hizantennas.com There are links on
their antenna pages to DX
No, not interested.
73,
Arie PA3A
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Pleas
Hi Mike,
What you're suggesting sounds like a good idea. I don't often use
diversity because of the dB loss and the stations I am usually trying
to work are the faintest ones out there. instead, I use the two
receivers linked on the same frequency, that gives me the best
sensitivity and I just
Gary,
If you want to hear the same antenna in both ears, connect it
to the RX IN jack and press RX ANT on the Main RX. Yes, you
will see a 3 dB "loss" due to the splitting on both receivers
but that's unavoidable *anytime* you feed a single antenna to
both receivers.
73,
... Joe, W4TV
On
Jeff
K2SDR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Working now.
Jeff
-Original Message-
From: Jeff Kelly
Sent: Saturday, February 01, 2014 9:19
To: elecraft@mailman.qth.net
Subject: [Elecraft] Is the Elecraft website down?
Jeff
K2SDR
__
Elecraft mailing list
Home: http:/
Let's let this thread rest for now.
73,
Eric
List Moderator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
Some great photos showing complete K line at :
http://www.amsterdamdx.org/ft5zm-press-release-1/
Or go to:
http://www.amsterdamdx.org/news/and select press release #1
Rick K2XT
__
Elecr
Since its a Saturday, thought I'd try here. I'm on the front panel board of
the K2 and my eyes are playing games with me today.
On pg. 24, a diode for D4 was installed.
On pg. 26 a 5-k linear-taper R1 was installed.
After installing these two and looking from the bottom side, it appears as
if the
The schematic shows that D4 is connected to the wiper of R1. So yes, it
is supposed to be like that!
On 2/1/2014 2:00 PM, Lane wrote:
Since its a Saturday, thought I'd try here. I'm on the front panel board of
the K2 and my eyes are playing games with me today.
On pg. 24, a diode for D4 was in
Lane,
The center (wiper) contact of R1 is indeed connected to the cathode of
D4 - refer to the Front Panel schematic and you can confirm that fact
for yourself.
73,
Don W3FPR
On 2/1/2014 5:00 PM, Lane wrote:
Since its a Saturday, thought I'd try here. I'm on the front panel board of
the K2
A rig would be good but whats more my interest I would really like to
see Elecraft make a matching amplifier for VHF/UHF to go with the
transverters and K3 with the 2m added.
David Moes
VE3DVY
__
Elecraft mailing list
Home: ht
Take a look at the K144XV-K Internal 2 M 10w Module Kit for the K3.
It works great!
Amateure Radio Operator N5GE
On Sat, 01 Feb 2014 17:08:58 -0500, you wrote:
>
>A rig would be good but whats more my interest I would really like to
>see Elecraft make a matching amplifier for VHF/UHF to g
Haven't seen any postings from Ron in a whiledo hope he is OK - and
maybe just having a rest from radio?
Mike, zl1mh.
--
Attn all spooksHope you found this one to be of interest!!
__
Elecraft mailing list
Home: http://mailman.
Ron is on vacation - all is well.
73,
Don W3FPR
On 2/1/2014 5:50 PM, Mike wrote:
Haven't seen any postings from Ron in a whiledo hope he is OK -
and maybe just having a rest from radio?
__
Elecraft mailing list
Home: http://mai
I'm entertaining the idea of adding the K144XV 2m module to my K3.
1) How necessary is the K144RFLK REFLOCK for routine SSB/CW operation,
with maybe some FM thrown in?
No plans for digital at this time.
2) Is there still room to add transverters to my transverter interface
module, whi
I would love an option that had 144/222/70cm/and 1.2 in a box. I've been
thinking about getting a ts-2000x, but I don't need all the HF stuff. If
Elecraft came out with such a product, I know many hams in my social group
who would get one.
Wayne & Eric, please let this idea become reality!
73 Ste
Hello Jim,
K144RFLK is adequate for SSB/CW unless you go for digital which you will also
need external 10Mhz reference. Of course, I assume you have already installed
the KTCXO3
According to the operation manual, you can add more transverters as long as you
have the KXV3A installed.
73
John
I told the wife I would build my K3 for "an hour or so each night after
dinner." However, I forgot how much I love putting together a well-engineered
kit... it was done by the following day...
After it was done I was messing around with the settings (with NO antenna
connected) and ran across a
Good Evening,
Weather has turned colder this weekend. Snow is due tomorrow so the
dry spell is over. The sun has been actively tossing ions our way and
causing some noise in the process. There is a blast due tomorrow which
may give the earth a glancing blow. We shall see.
Please join us
. 2/1/2014 9:43 AM, Rick Stealey wrote:
Some great photos
Best evidence of the success of this operation is that they are working
most of NA on 160M, including me on Friday morning. From my QTH, that is
11,360 miles. For W0, it's another 1,000 miles or so (and approximately
the antipode)
.
The weekly Elecraft SSB net meets tomorrow (Sunday, 2/2/14) at 1800z on 14.3035
MHz. I will be NCS from western Oregon. See you there.
Happy Ground Hog Day and go Seahawks (sorry)!
73,
Phil, NS7P
__
Elecraft mailing list
Home: http://
Hi there Paul,
Mike K2MK mentioned that & Joe, W4TV along the same line. I made up
the pieces today and did as was suggested. Indeed this is exactly
what I wanted to do with the K3 & the directional Rx antenna, mission
accomplished. Now I can null out offending stations sometimes to the
point
31 matches
Mail list logo