Which DATA mode you are in affects the sideband selection.DATA MODE A
normally uses USB for all bands (see the Elecraft manual on Data Mode
Selection, page 31 in may manual. It's easy to end up with a different
Data Mode and then things vary band to band. When you activate the Data
Actually a K3 should always be in LSB when in CW mode unless ALT has been
activated and then REV shows up right under CW on the right hand side of the
display.
Ken WA8JXM
On Nov 4, 2014, at 11:17 AM, Matt VK2RQ wrote:
To understand what sideband the radio is on in CW mode, listen to the
Hi Matt,
This isn't a sideband issue... It seems to be some issue with teh
software, not the radio... The radio is keeping in the correct
sideband, I see it 100% of the time with FLDigi... More as I get into
it.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
BTW Ken, I forgot to thank you for the reply! THANK YOU!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
Where do you get antennas like the one you use for finding noise?
Sent from my iPhone this time
On Nov 1, 2014, at 7:16 PM, Dale Parfitt pari...@frontier.com wrote:
Over the past few days I started to hear a random popcorn popping type noise
on 160, MW and lower. I had never heard a
http://www.mfjenterprises.com/Product.php?productid=MFJ-856
73, Tony K4QE
On Sun, Nov 9, 2014 at 8:16 AM, Gerry leary gerrylear...@icloud.com wrote:
Where do you get antennas like the one you use for finding noise?
Sent from my iPhone this time
On Nov 1, 2014, at 7:16 PM, Dale Parfitt
If your not using the KPAK3AUX cable kit, are you sure the key line is
connected?
Jack WA9FVP
-
Jack WA9FVP
Sent from my TRS-80 :-)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA500-tp7594350p7594501.html
Sent from the Elecraft mailing list archive at
Hi Ken,
I am in CW mode... It acts exactly as you describe, but when in CW
mode, I never see the REV below CW, and I have checked, the rig stays in
CW mode...
There is some difference between this rig and the Pro III, and II...
This issue never happened using the Icom rigs. It strikes me that
For those interested, I have a review of that antenna at:
http://nk7z.net/mfj/
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
Don:
Many thanks for the tips! RFC3 looks to be right. T2 was sitting right on the
board but I was able to pry the side next to T3 up so that it is certainly
clear of all the leads around it and there was no change. So I guess I will
have to wait a day or two until I get home and have a go
Hello,
Have you always wanted an Elecraft? A KX1, K1, K2, K3, whatever? Does
your K2 need a tuneup?
I build and service them all!
See what my clients have said about my construction and service work at
http://www.eham.net/reviews/detail/6768
Photos of the popular Twins -- the KPA100 and
I am getting 0 RF output from my K3 on all bands regardless of the commanded
power level. Pressing the TX button results in -- where the SWR would
normally be displayed.
Any suggestions or ideas on how to resolve this issue are greatly
appreciated.
Thanks
Gregg w6izt
It means TX Inh(ibit) has been activated. Check your menu setting.
73,
Rick, WA6NHC
iPad = small keypad = typos = sorry ;-)
On Nov 9, 2014, at 10:14 AM, Gregg W6IZT gregg.w6i...@gmail.com wrote:
I am getting 0 RF output from my K3 on all bands regardless of the commanded
power level.
Gregg, did you accidentally put your rig into test mode? Are the antennas
connected?
Good luck finding the problem source.
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
10-10 #74624, North Georgia Chapter #2038
K3# 281, P3 #688, KPA500 #1468
-Original Message-
Moin,
könnte auch sein, das das bei dem 38Special-Filter deshalb so große
Auswirkungen hatte, weil das Filter bereits verstimmt war. Die
Sollfrequenz wird hier sicher schon im abfallenden Bereich des Filters
gelegen haben. Der Abfall über der Sollfrequenz ist dann sicher größer
als -0.8dB.
Sorry, wrong recipient.
73 Wolfgang, DL2KI
--
73 de DL2KI
http://www.dl2ki.de
DOK K41
DL-QRP-AG #3247
G-QRPC #13541
Jabber-ID: dl...@jabber.ccc.de
GnuPG:
Öffentlicher Schlüssel erzeugt am: 2012-10-27
Key-ID: 0xFB3F3B7A
Algorithmus: RSA(4096 Bit)
Fingerprint: 4530 9FCB 9D48 9B50 967C F81C
(fault now fixed – am copying to main Elecraft Reflector in case anyone else
has similar fault or further comments)
From: G3PQA
Sent: Friday, November 07, 2014 12:13 PM
To: ZL3IO [via Elecraft]
Cc: Gary Surrency, W3FPR, GM3SEK
Subject: Re: KAT3 Mistuning (in response to email from ZL3IO
Looks like I lost a PIN diode in the TR switch, I've ordered replacements.
Thanks to all who replied.
Gregg
-Original Message-
From: Ian - Ham [mailto:km4ik@gmail.com]
Sent: Sunday, November 09, 2014 18:23 PM
To: 'Gregg W6IZT'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3
I was in the WAE rtty contest today when I heard a pop fizz, Red fault lamp on
the kpa500 was lit up and 60v err in the window.
I reset this fault, (switch off, and on) 2 hrs later I had another err fault,
this time 270v err, I again reset the amp, 2hrs passed and had another 60v err,
but this
Good Day,
After a week of almost constant rain we finally have some less wet
weather. I won't go so far as to say it is dry since the nightly fog
has the forest dripping by daybreak. But, with the sporadic sun
sightings, you can walk through the grass and not get soaked by 2 or 3
in the
Below...
On Sun, Nov 9, 2014 at 8:58 AM, David Cole d...@nk7z.net wrote:
Hi Ken,
I am in CW mode... It acts exactly as you describe, but when in CW
mode, I never see the REV below CW, and I have checked, the rig stays in
CW mode...
When in CW do a HOLD on MODE ALT. This will toggle
Steve,
Re-check the voltage on Q6. The emitter should be 0.6 volts *lower*
than the base - which should put it at the manual's voltage of 0.4
volts. The power setting should not matter for that measurement.
Check the emitter resistor on U6 - it should be 1.5 ohms. If this is a
K2 below
Hi Ken,
The fuse used is extremely popular in the US so I'd be surprised if it is
not also readily available in the UK.
The common reference is type 3AG fast blow cylindrical fuse and it is 6 amp
at 250 volt. Here's a Littlefuse part number 0312006.HXP. If you follow this
link you'll be able to
Ken,
How much power out were you running on RTTY with
your KPA500? I'm interested because I have the
amp, but have not yet used it on digital modes
(use the K3 barefoot at 25 W or so).
Phil W7OX
On 11/9/14 11:06 AM, Ken Chandler wrote:
I was in the WAE rtty contest today when I heard a
I'm debugging some communication issues between Writelog and K3 when the
RS-232 connection is routed through my power amp. Things mostly work,
but intermittent errors. Can someone please advise correct (or
preferred) Writelog settings? It would be a big help to eliminate
possible cockpit
25 matches
Mail list logo