Hi Matt, This isn't a sideband issue... It seems to be some issue with teh software, not the radio... The radio is keeping in the correct sideband, I see it 100% of the time with FLDigi... More as I get into it. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sun, 2014-11-09 at 07:52 -0500, Ken wrote: > Actually a K3 should always be in LSB when in CW mode unless ALT has been > activated and then REV shows up right under CW on the right hand side of the > display. > > Ken WA8JXM > > On Nov 4, 2014, at 11:17 AM, Matt VK2RQ wrote: > > > To understand what sideband the radio is on in CW mode, listen to the > > radio's speaker and tune up the band. If the signals you hear go UP in > > pitch as you tune UP the band, it is using LSB. If the pitch of the signals > > goes DOWN as you tune UP the band, the radio is using USB. Once you > > understand whether the radio is set to use LSB or USB for a particular > > band, you can then set your digital mode software to match. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
