This is a very broad question! If I had no limitations, financial or
regulatory, I would probably get a large Steppir beam on a tower at
least 70' tall. But that is probably not what you are thinking of.
A simple, cheap antenna is a dipole up as high as possible -- no less
than 30 feet in the
I think there's a selection effect; when someone learns Morse quickly
and it becomes known that they're musically inclined then folk make a
correlation. However, when musically inclined folk struggle to learn
Morse their musical inclination is either dis-regarded, or they hear
things like "You'
My monitor reports "no signal" from my P3 SVGA. I've gone into the
menu and enabled SVGA and set the resolution. Is there anything else
I need to do?
Thanks & 73,
Barry N1EU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/
Yes, I have been successful in getting the RPi B+ and RPi2 (both Wheezy
Raspian and Jessie Raspian) to connect to the KX3 with the Elecraft
supplied cables and two different USB sound cards (Griffin iMic and
Creative Labs). Plug and play for me. The device you need to look for is
something like /
7-band, no tuner required,
It's an 80 meter dipole, off center fed.
It has a broad swr bandwidth on 80 meters. What does that mean?
Rick K2XT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hello all..This AM on 160 meters there was a station CQing on 1.820.6 with
a fundamental freq signal strength of S9 on my K3. I also found (with the NB
on) that I could hear him Q5 but very weak on 1.810.6 and the same S 0 reading
but perfectly Q5 on 1.830.6. I turned the noise blanker of
> It has a broad swr bandwidth on 80 meters. What does that mean?
Please, don't take my comment seriously. It was tongue in cheek. There is one
installed here serving a remote Elecraft station.
On at least one band, 17 meters, and one simple test, the Steppir at 45 feet
beats the Buckmaster
Hi Craig,
DX'ing with the KX3 (or any QRP radio) for that matter can be very
challenging as you don't have the power to break pile-ups. Thus, you're
either going to need to get a high gain antenna, e.g. tower and beam, or
I would suggest digital modes. I've had a lot of success with WAS usin
Anyone touting a 7 band, no tuner required antenna as efficient and a real
barn burner failed to completeno, no, no, nomake that failed to even
start the Antenna Basics 101 course of instruction!
Sheesh..
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Craig
Lot's of good info, but let's end this thread now in the interest of reducing
email overload for others, as it has certainly exceeded the near term posting
volume limit for a single topic.
73,
Eric
Moderate Moderator
/elecraft.com/
_
Lot's of good info, but let's end this thread under its multiple headings now in
the interest of reducing email overload for others, as it has certainly exceeded
the near term posting volume limit for a single topic.
73,
Eric
Moderate Moderator
/elecraft.com/
Eric
/elecraft.com/
On 12/8/2015
Most antennas are a compromise of sorts whether it's installation height,
length, material. .etc. If you actually understand the physics and associated
math in addition to propagation then you innately understand there's no one
perfect antenna for everyone in the real world. When you're startin
Test - please ignore. I had a message rejected a while ago that should have
gone through…..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailm
>
> Brian - you da man!
>
> Seeing that /dev/ttyUSB0 in your message lit up the light bulb in the dark
> attic! I recall messing around with that when I set up my K3 to do some
> digital stuff long ago. One of the things that threw me for a loop was that
> all of the boxes under the “Enable C
One other note - I see you posted to Elecraft and topband reflectors on your
post. Please do not cross post when posting to the Elecraft list as that in-turn
causes a flood of email to the other list and back to here, including bounce
messages from non-members that fill our admin emaibox.
73,
Conflating narrow bandwidth with high efficiency isn't a good thing to do,
necessarily. Efficient 160 verticals across the band can be realized if one
"fattens the radiating element."
Sent from my Verizon Wireless 4G LTE smartphone
Original message
From: Jerry Moore
Date:
I forget about WSPR, but as JT9 etc uses Hamlib for rig control, just
guessing, but did you build the Hamlib rig control library and get all
that installed and working?
You can use the command line or an app called "Grig" (no doubt others
too) to test Hamlib.
73.
Dave G0WBX
Original M
Hi Larry,
[This response is posted only to Elecraft Reflector. Posting to more than
one reflector with the same email post gets you 1) dunned by the Elecraft
Admin -- already done by Eric 2) dunned by experienced general readership
of all reflectors, who long, long ago figured out cross-posting ju
Great post Guy,
I also encountered occasional noise on 160, (neighborhood Christmas
decorations!) during last weekends contest as well. I found similar settings
worked as you have described below. In addition, I found that switching in the
notch filter and manually adjusting the notch freque
I believe that to be true. Years ago would ask if people played any instruments
when teaching for the Novice ticket and if they did they seemed to pick it up
faster.
I attributed it to recognition or rhythm patterns. Two examples are Q is "here
comes the bride" and V as from Beethoven's 5th s
20 matches
Mail list logo