[Elecraft] Fwd: K3 - communication failure after KIO3B upgrade

Hi Carl Did you get the KIO3B problem resolved ? Barry VK2BJ -- Forwarded message -- From: Barry Simpson Date: 17 July 2016 at 13:03 Subject: Re: [Elecraft] K3 - communication failure after KIO3B upgrade To: Carl Clawson Cc: Lyle Johnson , elecraft Hi Carl Have you actual

[Elecraft] K3S USB Isolation

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] K3S USB Isolation

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] K3S USB Isolation

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: htt

Re: [Elecraft] OT: RF noise in solar photovoltaic system

In 2010 I had installed a 10kw system, about 400 feet down from my tower. Before selecting SMA as the inverter manufacturer, I went to two sites with my little Kenwood TF6A. It has am fm ssb bdcst to uhf... using the am broadcast band and built in loop antenna, the only noise I could discern

Re: [Elecraft] K3 - communication failure after KIO3B upgrade

I've been in conversation with tech support but we have not yet found what's wrong. -- Carl On Tue, Jul 19, 2016 at 2:53 AM, Barry Simpson wrote: > Hi Carl > > Did you get the KIO3B problem resolved ? > > Barry VK2BJ > > > -- Forwarded message -- > From: Barry Simpson > Date: 1

[Elecraft] K3 K POD macros

I'm happily writing some macros for my K Pod and not finding a way to access front panel controls like M1. Is there a way to access M1 from the K POD? Also does anyone have a macro to share that emulates a band select function? Thanks. 73 Jeff kb2m __

Re: [Elecraft] K3 K POD macros

Jeff, Most all the K3 buttons are accessible through the macro SWT/SWH commands. See page 17 of the Programmers Reference. Specifically SWT21 is a tap of the M1 button and SWH21 is a hold. Store the macro in the K3 (the latest K3 Utility allows 16 macros to be edited/stored). Then one of th

Re: [Elecraft] K3 K POD macros

You can tap or hold buttons like M1 with SWT or SWH. Change bands with BN. Dick, K6KR > On Jul 19, 2016, at 07:51, Jeff Griffin wrote: > > I'm happily writing some macros for my K Pod and not finding a way to access > front panel controls like M1. Is there a way to access M1 from the K POD? >

[Elecraft] K-Pod questions (unanswered)

I'm teetering on the fence about buying one of these or not. I've sent the following directly to Elecraft but haven't received an answer. Perhaps someone else can help. The K-Pod manual mentions LEDs D1-D4 are programmable then goes on to say that D1-D3 are used already. Please clarify and te

Re: [Elecraft] KX2 - Option Pre-Installed?

Hi Bret, We install the internal options here at ship time if they are ordered with the KX2. 73, Eric /elecraft.com/ On 7/18/2016 3:25 PM, MaverickNH wrote: I just put in a order for a KX2 with ATU & clock. Does Elecraft install them or is that my job? Bret/KC1CJN ___

Re: [Elecraft] K-Pod questions (unanswered)

Ordered one last week and shipped the next day. Now I have one for each radio. Jim Finan AB4AC ‎ Sent from my BlackBerry 10 smartphone.   Original Message   From: Wes Stewart Sent: Tuesday, July 19, 2016 1:06 PM To: Elecraft Reflector Subject: [Elecraft] K-Pod questions (unanswered) I'm teetering

Re: [Elecraft] OT: RF noise in solar photovoltaic system

Hi Alan, We put in a 10KW array on our garage roof using two SMA 5000TL-US-22 inverters to grid tie. I could not see any difference in noise floor or moving noise bands with the inverters running or with both the DC and AC disconnected. Perhaps just lucky? We used a local solar company that ha

Re: [Elecraft] K-Pod questions (unanswered)

I thanked you privately for this, then went to order one. The page has been updated and now they're not shipping until the end of August. On 7/19/2016 10:19 AM, Jim Finan wrote: Ordered one last week and shipped the next day. Now I have one for each radio. Jim Finan AB4AC ‎ Sent from my Black

[Elecraft] XV Transverter RF Voltages

Hi Gang, Does anyone have a schematic showing typical RF voltages for the XV series? My XV222 is low on power out, about 3W, and I need to run through the xmit chain. I had full power last September and last month it was putting out 7W or so. Something bit the dust. Thanks, Mark 73, Mark K2QO FN

Re: [Elecraft] Help sell me on the K3S

I will throw my view into the mix. As a new Ham operator you have no idea what you want to do in the hobby other than EVERYTHING!!! In addition to wanting to do everything we're also most often budget limited to some extent. Challenge: Weigh the desire to do everything with the most cost effec

[Elecraft] FS: Weighted tuning knobs for K3

For sale: K3 Main and VFO B weighted tuning knobs. The Main tuning knob has the finger dimple, but it is NOT the ball bearing type currently being sold. Asking $95 shipped USPS for the pair. These really make a difference when you play with your rig. ;>) PayPal preferred. Please email me off list.

Re: [Elecraft] Help sell me on the K3S

Jerry Spot on. Thank you for your advice to this new ham. 73 Gerald KC6CNN > On Jul 19, 2016, at 1:46 PM, Jerry Moore wrote: > > I will throw my view into the mix. > > As a new Ham operator you have no idea what you want to do in the hobby > other than EVERYTHING!!! > In addition to wanting

Re: [Elecraft] XV Transverter RF Voltages

I'm not an expert but I have built and aligned a half dozen XVs. Rather than measure the RF voltage, I would recommend going back through the Alignment and Test section of the XV Build/Operation Manual. The DC voltages shown there are much easier to measure accurately. I'm sure you'll be able to

[Elecraft] This is a test to see if ISP no longer reformatting my e-mails

This is to see if my mail provider is no longer reformatting my emails into HTML Joe KO8V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman

Re: [Elecraft] deoxit

It is my opinion that with gold plated contacts, nothing should be needed. It is also my opinion **never** to touch gold plated contacts. (I keep some Caig DeoxIT on hand.) Dick, n0ce On 7/18/2016 10:50 PM, Rich Assarabowski wrote: What's the consensus on the best stuff to use on all contact

[Elecraft] How difficult is it to install the FM filter ofr K3 with ...

I have a K3 with the 2 meter module and second receiver installed. I recently acquired a FM filter and am wondering how difficult it would be to install it. Mostly I guess I am looking for an idea on what steps I need to perform and in what order. I installed the second receiver some time ago after

Re: [Elecraft] OT: RF noise in solar photovoltaic system

On Tue,7/19/2016 10:23 AM, Tom Azlin W7SUA wrote: We put in a 10KW array on our garage roof using two SMA 5000TL-US-22 inverters to grid tie. I could not see any difference in noise floor or moving noise bands with the inverters running or with both the DC and AC disconnected. Perhaps just lu

Re: [Elecraft] XV Transverter RF Voltages

You can find the manuals here: http://www.elecraft.com/K2_Manual_Download_Page.htm#XV They should have what you are looking for. Mark Musick, WB9CIF -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark Adams Sent: Tuesday, July 19, 2016 6:45 PM

Re: [Elecraft] deoxit

The contact doesn't exist in a vacuum and is thus potentially exposed to whatever exists in the air at that location. Over time, regardless, the connections may require maintenance. Example: I flew as Aircrew for the Navy. Most of our gear was sealed. Even being sealed a re-seat of a circuit card

[Elecraft] Buy a K3S?

Agree fully with the suggestions. As to equipment, I once saw a sign in a high-end telescope shop: “Buy the best first and cry only once.” Ted, KN1CBR -- Message: 30 Date: Tue, 19 Jul 2016 14:46:19 -0400 From: "Jerry Moore" To: "'Reuben Popp'" ,"'Elecraft Refl

[Elecraft] Are any of you using a solar panel to charge KX2 battery?

Hello! I am a newly minted KX2 owner and this is my first post here - so be gentle J. So far, I am having a ball with the rig and enjoying discovering it's many features. Just before ordering the KXBT2 battery pack for the KX2, I called Elecraft and asked if the unit could be charged with a

Re: [Elecraft] Failed K3 Firmware update DSP1

Well, I got a response from Elecraft, they had me clean the pins on the RF board. This did not work and now I have been asked to ship them my radio. :( So this looks like my attempt at getting up to date firmware and fixes have left me with a nonworking K3, that operated fine, and I have to ship El

Re: [Elecraft] Buy a K3S?

AKA “Buy nice, not twice” …bc nr4c > On Jul 19, 2016, at 4:13 PM, Dauer, Edward wrote: > > Agree fully with the suggestions. > > As to equipment, I once saw a sign in a high-end telescope shop: “Buy the > best first and cry only once.” > > Ted, KN1CBR > > --

Re: [Elecraft] How difficult is it to install the FM filter ofr K3 with ...

Well, the FM filter for the main receiver is mounted on the main RF board. So the 2Meter module must come out, and the sub-receiver, and of course the top and front bottom panel, I also think it is easier to re-install the sub-receiver if you remove the left side panel (with handle). …bill nr

Re: [Elecraft] Failed K3 Firmware update DSP1

Forgive me if I missed something Did you use the utility to save a backup of your radio -before- attempting the update? 73 K0PP On Jul 19, 2016 2:26 PM, "Matthew Lawson" wrote: > Well, I got a response from Elecraft, they had me clean the pins on the RF > board. This did not work and now

Re: [Elecraft] Buy a K3S?

Er... Sorry Bill, this was meant to go to the list... So... maybe a bit foolish of me, but... it's a bit like Christmas. Don't kill me, but, I was given a very nice deal on a brand new, never used ICOM 7700 for well over half of what its current msrp is **Note, I really meant that the unit cost m

[Elecraft] Items for sale, QRP mostly

http://ae5x.blogspot.com/2016/07/qrp-other-items-for-sale.html John AE5X Affordable Wireless Plans Set up is easy. Get online in minutes. Starting at only $9.95 per month! www.netzero.net?refcd=nzmem0216 __

Re: [Elecraft] Items for sale, QRP mostly

I am still sorting out Henry, W5HNS, estate for his wife and still have some good items. Anyone needing a list please email me. Thanks. Mike, 5wmg Bella-Green Bed & Breakfast and Tiny Houses www.bella-green.com On Tue, Jul 19, 2016 at 4:13 PM, a...@juno.com wrote: > http://ae5x.blogspot.com/2

[Elecraft] K3/K3s Filters F/S

Surplus to my needs I currently have the following filters available: KFL3A-2.1K KFL3A-1.8K KFL3A-6K Sell for $105 each shipped Priority Mail upon receipt of funds. PayPal only please. 73, Mike - W0AG __ Elecraft mailing list Home: htt

[Elecraft] K-pod

Does the K-pod work with the K3/0 mini in remote operations? Mike W0AG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

[Elecraft] K3 error message

After removing one filter from my subRx and moving the remaining filter (2.8) to position #1, I'm now getting and ERR BP3 on start up. Before I open everything up again and remove the KRX3, SUBIN and SUBOUT boards and reset everything as detailed in the manual, is there anything else I should be d

Re: [Elecraft] deoxit

I have forgotten so much over the years, but I am left with the understanding that gold against gold does not suffer metal migration. Now dirt is another ballgame. And so is condensation. As the name 'DeoxIT' suggests oxidation to me, I answered the way I did. I don't think gold oxidizes. D

Re: [Elecraft] K-pod

Not at this time. It takes a bit of work to get it there, so we can't promise it near term. 73, Eric /elecraft.com/ On 7/19/2016 4:33 PM, Mike Murray wrote: Does the K-pod work with the K3/0 mini in remote operations? Mike W0AG _

Re: [Elecraft] K-pod

Thanks Eric!!! On Tue, Jul 19, 2016 at 8:21 PM, Eric Swartz - WA6HHQ, Elecraft < e...@elecraft.com> wrote: > Not at this time. It takes a bit of work to get it there, so we can't > promise it near term. > > 73, > > Eric > *elecraft.com * > > On 7/19/2016 4:33 PM, Mike Murra

Re: [Elecraft] Test serial-to-USB converter

Instead of buying a new adapter, you might consider upgrading your K3 with a KIO3B interface board that contains a built-in USB port. There are several other enhancements in the KIO3B that may make it a "no-brainer" upgrade! 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft

Re: [Elecraft] Test serial-to-USB converter

Absolutely. I had some "strangeness" occur with a Compaq laptop a number of years ago and support instructed me to remove the battery for a full minute (they have a "supercapacitor" that must fully discharge) and it fixed the problem. Subsequently I ran into that with my XYLs Toshiba laptop which w

Re: [Elecraft] deoxit

I have only used deoxit because the little bottle I bought a decade ago is not nearly exhausted. It works great and contacts cleaned with it have continued to work for years afterward, even aboard ships where they are exposed to salty air (but not salt water). However other formulations or brands

Re: [Elecraft] deoxit

Quite so. I used deoxit in a small 2 oz bottle with a thin syringe-like tube applicator that puts a very tiny amount on the contact. That's all it takes. 73 Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian White Sent: Monday, July 18,

Re: [Elecraft] K3 K POD macros

Hi Jeff: M1 is accessed by SWT21;, M2 - SWT32;, M3 - SWT35; SWT10; moves you one band up. SWT09; moves you one band down. You can use the memories to go direct to a band, or use the direct frequency entry. I have submitted a two page summary of all of these commands for approval in the next u

Re: [Elecraft] Test serial-to-USB converter

I have solved problems with my laptops in the past as Ron describes. However, take note that most laptops today do not have removable batteries or DVD/Blue Ray drives. All in an effort to make the laptops thinner. Mark, WB9CIF -Original Message- From: Elecraft [mailto:elecraft-boun...@ma

Re: [Elecraft] Failed K3 Firmware update DSP1

Well, Howard was able to send me FW 2.19 and I had a successful flash to the K3. Now I tried to jumped from version 2.19 to 5.38, is there a bug in jumping this far? Is there a DSP hardware revision that may have an issue with current version of firmware (older radio, 1st gen, etc...?)??? Anyways

[Elecraft] KPA500 display blank

I was using the KPA500 tonight and all of a sudden the info display went blank.  Everything else is fine.  Puts out full power, talks to the K3, buttons change bands.  Power cycle did not help.  Disconnecting the K3 data cables didn't help.  Any ideas? 73 Mike WB0SND Sent via the Samsung Galax