K3S-F Transceiver #11139
100W upgrade for K3/K3S, Factory Installed
ATU for K3/K3S, Factory Installed
K3 TCXO 1ppm, factory installed
2.7kHz Elecraft Filter
K3 500 Hz, 5 Pole Filter, factory installed
KRX3A 2nd RX Factory Installed
KFL3A-2.7K Filter installed in KRX3A
K3 500 Hz, 5 Pole Filter, fa
Does anyone besides you know what you are talking about?
Mike / KK5F
-Original Message-
>From: Robert Sands
>Sent: Aug 13, 2018 12:10 AM
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] KX3 Mic doubles as speaker source?
>
>Anyone using this after market item? Who sells them? Any good?
Anyone using this after market item? Who sells them? Any good?
Robert Sands
K7VO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Good Evening,
While most were reporting hot and some humid a couple of us were
getting a day of ocean breeze. I have been seeing smoke in the
satellite images across the US from the Western forest fires. Today I
got a report from North Dakota about the smoke. Over the weekend the
smoke f
On the east coast 99% of your contacts should be on 2nd/odd (if calling
CQ). If you are on the east coast and you are TX on 1st be aware of who is
trying to listen locally while you are TX'ing. Just listen and be
considerate.
O another note I would orient the AO-50 horizontal. I used to use a pair
Bob;
This is a Windows-only issue that dates back to their use of serial mice. It is
not problem on the Mac, which has no reason to toggle the serial port control
signals on startup.
73!
Jack, W6FB
> On Aug 12, 2018, at 3:50 PM, Bob Wilson, N6TV wrote:
>
> Elecraft K3 MCU version 5.33 adde
Elecraft K3 MCU version 5.33 added the new "USB SAFE" option as a default
(CONFIG:PTT-KEY, Tap '1'), which prevents unexpected transmissions when you
restart Windows or reconnect an FTDI adapter.
This works fine when controlling a K3 or K3S via USB, but it doesn't help
when using an FTDI USB-to-Se
I believe the JAT500 wants to be ON before the K3(S) is powered ON. Mine stays
on 24/7.
Sent from my iPhone
...nr4c. bill
> On Aug 12, 2018, at 11:26 AM,
> wrote:
>
> The 12V accessory jack on the K3 was upgraded from .5A to 1A for the
> addition of the SVGA option on the P3. This was bef
Try opening it back up and reseating the ribbon cables.
My KX3 stopped transmitting once and it was because the ribbon cable was partly
unplugged. I expect all sorts of things might fail because of that.
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
> On Aug 12,
The August Sprint is this coming Tuesday evening local time (August 14th,
EDT - 8:30-10:30PM, CDT - 7:30-9:30PM, MDT - 6:30-8:30PM, PDT - 5:30-7:30PM),
which translates as Wednesday, August 15th, 0030 to 0230Z in all cases.
For all the "official" information, please go to:
http://naqcc.info/sprin
The 2018 NJQRP Skeeter Hunt is only one week away! Next Sunday from 1700 to
2100 UTC, Skeeters frrom all over will be spreading their wings, hunting and
being hunted! It's not too late to join in on the fun and get your Skeeter
number. Send an e-mail to w...@arrl.net for your unique number for t
Yes, I find that the number of decodes is less this afternoon than last
evening. Yes, we've worked twice, last evening and again this
afternoon. Glad you have things going. I'm running my K3S at about
30 watts driving the KPA500 to 450 watts. The antenna is a 4 ele
HyGain at 55 ft fed w
Gary,
It works best if you set the LINE gain to mid-range, and then adjust the
audio levels in WSJT-X and the computer "line out" or "speaker" to get
the 4 bars with the 5th flickering. When you get close, you can adjust
the LINE gain to "fine tune" it.
If the K3 LINE gain is set either towar
Hi Bob,
I don't recall if it was from the WSJT-X
online help page or advice from a K3s user
but I had my WSJT-X power bar around 80%
and in the sound manager, both playback &
recording levels are around 52%.
With that, the line level value in the K3s
was around 7. After the suggestions
earl
Do understand in the K3 & K3S operation the actual output power is
controlled by the PWR setting on the radio. The PWR setting on the
WSJT-X screen is actually audio level. This should be adjusted about
mid scale for both TUNE and TRANSMIT. The radio Line Gain will then
allow you to adjust t
-- Forwarded message -
From: Ken G Kopp
Date: Sun, Aug 12, 2018, 11:03
Subject: Re: [Elecraft] ATU not working
To: sozi81
Who are you?
Do you have a call?
K0PP
On Sun, Aug 12, 2018, 09:12 sozi81 wrote:
> Hello everyone.
>
> I have this issue with my trustworthy Elecraft KX3
Somebody without name or call wrote:
> I have this issue with my trustworthy Elecraft KX3...
>
>
> Any advice?
Yes. Exercise courtesy.
1. Since Elecraft makes more than one product, show the model designation in
the SUBJECT line.
2. Sign the post with name and call sign.
Mike / KK5F
___
Hi Alexander,
No, ALC line here. I did mean to say idle
current. :)
I have increased the reading on the ALC
graph as suggested and so far it is
working properly, time will tell if that
was the issue.
Thank you for the reply!
73,
Gary
KA1J
>
> Hi Gary,
> are You using any ALC line from A
Don & Jim,
Yes, I do have it set for the DATA A. The
bars were with the 5th flickering.
I just bumped the line from 7, to 8. Now
they are solid bars, no flicker. It does
seem to be OK at this moment and perhaps
that is what I needed to do. It was
intermittent before so will have to wait
Due the sale of my K3s, I am now selling my P3 for $480. I can supply any
photos you might like to see.
The unit is SN 3856 and was not a factory build. I was in Computer
engineering for 40 years and retired as the Quality Assurance Director for a
company that was building and supplying fl
The 25.4:1 SWR indicates there is no antenna connected. Check the antenna
connection to the ATU board. You may have dislodged it while replacing
batteries.
Mark
KE6BB
null
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Gary,
Are you working in DATA A mode, and driving the audio to 4 bars solid
with the 5th bar flickering on the ALC meter?
That is the No ALC point for the K3/K3S/KX2/KX3. The lower bars are
there to give you a guide to adjust the audio.
So the common internet advice not to drive into ALC i
The 12V accessory jack on the K3 was upgraded from .5A to 1A for the
addition of the SVGA option on the P3. This was before the KAT500 was
available.
The P3 draws .5A without the SVGA option and draws .7A with the SVGA option.
The KAT500 draws 1A max with a specification of .2A typical.
If you don'
Last night while using the K3s and WSJT-X
on meteor Scatter in the MSK144 mode I was
making numerous contacts. I stopped for
awhile and returned, this time noticing I
was not putting out any output from the
amp.
The rig went into the transmit state, and
the relay engaged on the amp. There wa
Hello everyone.
I have this issue with my trustworthy Elecraft KX3.
Never had an issue - always well working. Few weeks ago I decided to replace
batteries and after manipulating a little bit with the Elecraft fully open
(I tighten up some screws of the dissipator) i closed up the enclosure
an
Bear with me, this is long but it works.
My solution was to get a Google Voice phone number and associate it with my
“real” phone number. It keeps a record of whoever calls and as a rule I
don’t answer unless I know the number - a phone screen. If they leave a
voicemail that indicates a telemarke
The K3s has been sold.
John
AD2F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Pl
Hi All,
In this day and age it is almost impossible to keep your lines of
communication "pure"! By that, I mean absent of any junk mail, anonymous
callers, etc. For eons my mail box has been a repository for all sorts of
unsolicited junk. Now my email addresses are being overrun as well, an
That is the better way to handle power for the KAT500.
73
Bob, K4TAX
On 8/12/2018 8:57 AM, Ralph S. Turk wrote:
Can one use the 12vdc of the K3 to power the KAT 500? The K3 has the latest
update for the 12 dc.
Ralph, W7HSG/AFA9RT
As a long time MS advocate, "more power.more antenna". I run
500 watts to a 4 element HyGain Yagi at 55 ft.
You can reduce "F Tol to 100 Hz" to reduce the burden on the CPU, and
use Deep Decode. The software will configure the radio correctly. It
may set the radio to split if and as
Yes. If I recall, that is why they came up with the mid.
Dave - K9FN
On Sun, Aug 12, 2018 at 9:58 AM Ralph S. Turk wrote:
> Can one use the 12vdc of the K3 to power the KAT 500? The K3 has the
> latest update for the 12 dc.
>
> Ralph, W7HSG/AFA9RT
>
Can one use the 12vdc of the K3 to power the KAT 500? The K3 has the latest
update for the 12 dc.
Ralph, W7HSG/AFA9RT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
So I'm trying WSJT-X MSK144 first time on my K3S - running 150W into a PAR
AO-50 vertical loop at 30ft in Southern NH. Settings Rx 1500, F Tol 200, T/R
15s on Fast Decode (older 8 core CPU won't do Deep). By doing it wrong my
local HAMs have kindly let me know to TX Odd on East Coast. I also had th
33 matches
Mail list logo