Elecraft KPA500 watt amplifier in very good physical and electrical condition
with cables and manuals, wired for 220 volt operation. $1800 Postal Money
Order. If interested, please contact off list. $1800. 73’s folks.
__
Elecraft maili
The KX2 not transmitting problem has been solved with the great help from Doug
of Elecraft Technical support along with some backup there in Watsonville.
Another example of great support of Elecraft products. Turns out it was
several software parameters messed up in the calibration file. I also
I use Win4K3Suite with my KX3, and it will at least shut OFF the radio from
the software. What it won't do is turn it back ON.
As I understand it, what the two-button method is designed to do is to make
sure the radio saves its current state before it shuts down. If you turn it
off via the power l
Elecraft K3s – 100 (not an upgraded K3)
KTCXD3-1F 1 PPM TCXO
8 pole 2.8 KHz Filter
2nd Receiver
5 pole 2.7 KHz Filter
P3 panadapter w/ CBLP3Y cable (to K3s)
All manuals, Famous Astatic D104 PTT lollipop mic with Heil dyanamic
conversion.
All
Ken:
> On May 13, 2019, at 10:48 PM, Kenneth P Alexander wrote:
>
> I'm considering buying a KX2 for remote operation; CW and digital. The
> radio will be set up in VE3. I am retired and living in Thailand. I can't
> get a Thai license because Canada and Thailand do not have a reciprocal
>
Consider adding a local phone and a touchtone decoder to do some basic
functions, on off, resets, and etc. More reliable than the internet and it
makes the station "legal" having a secondary means of control.
Bob, K4TAX
Sent from my iPhone
> On May 14, 2019, at 9:22 AM, Barry Baines via Ele
With the KX2 and KX3 two button power on, I would think that they are
not a good choice for remote operation. OTOH, the K3 and K3S do have
provision for remote power on via the Power On pin in the ACC connector.
The two button power on/off is present so the KX2 and KX3 cannot
accidentally be
I was going to ask the same question about the AXE1. A AX1 was waiting here
for me last week when I returned from a business trip. I really wasn't sure
what to expect but have a goal of doing more outside operating and antenna
setup is always a deciding factor. If you only have a short time t
I would love this All of my SOTA activations are 20 and 40 meters.
Can we pre-order?!
Hank
K4HYJ
- Original Message -
From: Wayne Burdick (n...@elecraft.com)
Date: 05/13/19 20:57
To: Mike Parkes (mspma...@gmail.com)
Cc: Elecraft Reflector (elecraft@mailman.qth.net)
Subject: Re: [
KX3 (but not KX2) can be turned on by brief application of 8 to 12V on
the PTT pin of the mic connector.
73,
Lyle KK7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.
Please contact me off line for build info and price.Thank you. Greg.
(K9ON)greg7412@gmail.comSent from my Galaxy Tab® S2
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
Bob:
> On May 14, 2019, at 11:01 AM, Bob McGraw K4TAX wrote:
>
> Consider adding a local phone and a touchtone decoder to do some basic
> functions, on off, resets, and etc. More reliable than the internet and it
> makes the station "legal" having a secondary means of control.
The Elecraft
Just to close this out it turns out that the incorrect setting I had was
XV2(Adr) = trn1.
Per Elecraft support I should have selected XV2(Adr) = int.trn0
The correct settings (which are different than configuring a K3) are;
XV2 (on) = Yes
XV2 (RF) = 1296
XV2 (IF) = 50
XV2 (Pwr) = 3.0
XV2 (OFS)
On 4/26/2019 8:00 PM, Phil Kane wrote:
> I wish to thank all the folks here who offered helpful comments on the
> problem. Yes, I did all the checking of ports and drivers and
> connections - I've been dealing with those sort of things for years so
> I've been there, but with no resolution this
Interesting feature. Nice to know. Is it documented in the manual?
73, Igor UA9CDC
14.05.2019 21:00, Lyle Johnson пишет:
KX3 (but not KX2) can be turned on by brief application of 8 to 12V on
the PTT pin of the mic connector.
73,
Lyle KK7P
___
Igor,
It is in the manual, see Remote Control of the KX3 starting on page 28.
73,
Don W3FPR
On 5/14/2019 3:56 PM, Igor Sokolov wrote:
Interesting feature. Nice to know. Is it documented in the manual?
73, Igor UA9CDC
14.05.2019 21:00, Lyle Johnson пишет:
KX3 (but not KX2) can be turned on by
Peter,
After a K1 Reset, nothing needs to be adjusted, but you will have to do
the menu related settings:
STP, STL, b1 and b2 settings (b3 and b4 if a 4 band board) and CAL OPF.
CAL OPF is not difficult, but does require a signal of known frequency
on each band - it is just an adjustment of th
Add me to the list of people who would immediately buy the AXE1 extender, as
soon as it becomes available. 🙂
73, Mike N5MAJ
> On May 13, 2019, at 7:55 PM, Wayne Burdick wrote:
>
> Hi Mike,
>
>> There was some discussion here about a possible extender add-on for the AX1
>> antenna to allow op
18 matches
Mail list logo