Good Evening,
Spring has finally touched my front yard. Trillium and daffodils
blooming at the same time is odd though, normally they are weeks apart.
I found a number of elk tracks but no defined trails. They seem to be
wandering around finding the easy paths. Lots of very large
Ft-991 (pre-A samples at least) has trouble tuning some multitrap verticals
for all the expected bands, this may explain why
On Sat, Apr 11, 2020, 7:57 PM Mark Goldberg wrote:
> On Sat, Apr 11, 2020 at 6:09 PM Bob McGraw K4TAX
> wrote:
>
> > My 6M yagi shows a 5.3:1 SWR as indicated on my K3S
On Sat, Apr 11, 2020 at 6:09 PM Bob McGraw K4TAX
wrote:
> My 6M yagi shows a 5.3:1 SWR as indicated on my K3S on 28.3MHz with the
> ATU in Bypass mode. When the KAT3A ATU in the radio resolves a match,
> the indicated SWR indicated is 1.1:1 on the radio.
>
> Using the same antenna but using
If you're trying to figure out if you should purchase a KAT3A, you cannot buy
one from Elecraft.
John KK9A
John Stengrevics WA1EAZ wrote:
I would if I had one!
73,
John
WA1EAZ
> On Apr 11, 2020, at 5:15 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what
So you’re questioning whether you should buy one?
Might have made that clear in your query.
Yes. No K3(S) should exist without the appropriate KAT3(a).
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 5:32 PM, John Stengrevics
> wrote:
>
> I would if I had one!
>
> 73,
>
>
My 6M yagi shows a 5.3:1 SWR as indicated on my K3S on 28.3MHz with the
ATU in Bypass mode. When the KAT3A ATU in the radio resolves a match,
the indicated SWR indicated is 1.1:1 on the radio.
Using the same antenna but using my KAT500 ATU the best SWR resolved is
1.6:1 as indicated on the
If I had one, I would certainly give it a try! I am trying to decide if I
should buy one.
John
WA1EAZ
> On Apr 11, 2020, at 8:23 PM, Nr4c wrote:
>
> Why not try it.
>
> The KAT3(a) can tune many a strange antenna.
>
> It seems so easy to hook up the antenna and tap the button to see if
What’d I tell you?
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 5:17 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what happens?
>
> 73,
> Don W3FPR
>
>> On 4/11/2020 5:06 PM, John Stengrevics wrote:
>> My 6 meter antenna reads an SWR of 10:1 on 10
Why not try it.
The KAT3(a) can tune many a strange antenna.
It seems so easy to hook up the antenna and tap the button to see if it works
instead of typing a query here and getting many responses. A lot of which will
suggest “Try it and see. “
Good luck.
Sent from my iPhone
...nr4c.
I seem to remember a spike a bit right of center. I recall this appears when no
signal or light signals are present. Stronger signals will diminish this
artifact.
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 1:04 PM, James Smallwood via Elecraft
> wrote:
>
> Hello - I recently
I would if I had one!
73,
John
WA1EAZ
> On Apr 11, 2020, at 5:15 PM, Don Wilhelm wrote:
>
> Why don't you tap the ATU TUNE button and see what happens?
>
> 73,
> Don W3FPR
>
> On 4/11/2020 5:06 PM, John Stengrevics wrote:
>> My 6 meter antenna reads an SWR of 10:1 on 10 meters. The
I’m not sure why disconnecting the radio and reconnecting again should require
a firmware reload.
Did you try reloading the latest CONFIG file?
Sent from my iPhone
...nr4c. bill
> On Apr 11, 2020, at 11:46 AM, Randy Diddel wrote:
>
> Hi all,
>
> I had disconnected my K3s to move some
Why don't you tap the ATU TUNE button and see what happens?
73,
Don W3FPR
On 4/11/2020 5:06 PM, John Stengrevics wrote:
My 6 meter antenna reads an SWR of 10:1 on 10 meters. The KAT3A specs suggest
it can tune that degree of mismatch. Is it reasonable to think that the KAT3A
could match my
My 6 meter antenna reads an SWR of 10:1 on 10 meters. The KAT3A specs suggest
it can tune that degree of mismatch. Is it reasonable to think that the KAT3A
could match my antenna well enough for 10 meters?
Thanks & 73,
John
WA1EAZ
Good evening to you as well Christophe,
C71 is properly 82pF, thanks for checking.
That likely means you have a relay problem with either K13, K14 or K15.
You may have a similar problem on bands other than 40m.
You should also check the VFO frequencies on each of the other bands.
Set the K2 to
good evening Don,
visually C71 blue capacitor "82J" so correct for registration, I think?
for C71 in conjunction with K13 pin 7 and K14 pin 4 on the diagram
I will give you the continuities on the relays tomorrow after having
started the K2 on 40M then having turned it off
thanks again for
Christophe,
I made a mistake on the value of C71. With no K60XV installed, the
proper value is 82pF (marked either '82' or 820').
73,
Don W3FPR
On 4/11/2020 12:38 PM, Christophe aufacf wrote:
hello don
I forgot to answer you no K60XV, no rework that I do not know this
option, I have the
I am looking for a NB module for my K2. If anyone has one they are not
using and would be willing to sell I would like to hear from them.
Please indicate price shipped to 30092.
Also if anyone has a K2 they would be willing to part with I would be
interested in purchasing. Thanks in
Look for changes in Windows - particularly the "Sound Control Panel"
Recording tab - level for "Line In (microHAM CODEC)". Windows is
notorious for making arbitrary changes - particularly as part of
the Windows Update process.
73,
... Joe, W4TV
On 2020-04-11 1:45 PM, Peter Chamalian
Christophe,
OK, the first thing you need to do is check the value (and soldering) of
C71 - it should be 120pF (marked 121).
If that is correct, you need to check continuity through relays K13, K14
and K15. The schematic shows the relays in their not-set position. K13
and K15 must be
The K3S works just fine on FT modes. I had my line level set for 11 but
today I had to crank my line level way up to get the same output level.
I've made no changes that I'm aware of. My Line out goes to the micro Keyer
II
Any suggestions as to why and how to fix?
I'm using a micro Keyer
Are you sure this might not be an issue with electrical noise sourced from your
PC? I haven't had any such issues with my PX3 using the Elecraft cable.
Grant NQ5T
> On Apr 11, 2020, at 1:02 PM, James Smallwood via Elecraft
> wrote:
>
> Hello - I recently purchased a PX3 to support my QRP
Hello - I recently purchased a PX3 to support my QRP contesting efforts and am
really glad I did. It really helps streamline S during contests.
However, when I plug a brand new Elecraft-provided USB cable for connecting the
PX3/KX3 into my two-year old HP Pavilion PC, a 3-4db artifact appears
Has anyone successfully used WSJT-X loaded in Raspberry Pi with the KX2? I’d
love to learn how to do it. Any advice would be appreciated.
Hiroki AH6CY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
hello don
I forgot to answer you no K60XV, no rework that I do not know this
option, I have the NB option provided for purchase
for the parameter D19 = N
thank you in advance
73 , Cris F8ACF
Le sam. 11 avr. 2020 à 16:52, Don Wilhelm a écrit :
>
> Christophe,
>
> You have not yet answered 2
Thanks, all.
Thanks,
Mike NJ2OM
> On Apr 11, 2020, at 11:12 AM, Don Wilhelm wrote:
>
> Mike,
>
> That will not work with the K2. You will have to move to the K3 with a SubRX
> to do that effectively.
>
> 73,
> Don W3FPR
>
>> On 4/11/2020 11:04 AM, NJMike wrote:
>> I thought that I
Hi all,
I had disconnected my K3s to move some things behind the radio. When I plugged
everything back in and powered back on, I got the ERR DSX. RTFM, I see that I
needed to reload the firmware. I reloaded the firmware and the K3s Utility
failed with Downloaded DSP1 revision "02.88". Radio
Mike,
That will not work with the K2. You will have to move to the K3 with a
SubRX to do that effectively.
73,
Don W3FPR
On 4/11/2020 11:04 AM, NJMike wrote:
I thought that I could have VFO A & B on different bands. Is that wrong?
Thanks,
Mike NJ2OM
I thought that I could have VFO A & B on different bands. Is that wrong?
Thanks,
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Christophe,
You have not yet answered 2 important questions which relate to your 40
meter operation.
1) Do you have the K60XV option installed (or do you have the Rework
Eliminators installed)?
2) What is your setting of the secondary menu D19 parameter?
The answers to those 2 questions
hello don
the frequency to find with CAL FACT 18.159 kHz
thank you in advance for your good advice
73 , Cris F8ACF
Le ven. 10 avr. 2020 à 21:21, Don Wilhelm a écrit :
>
> Christophe,
>
> Tune the K2 to 7100kHz
> Then plug the internal counter probe into TP1 and the P6 header on the
> Control
31 matches
Mail list logo