Kent yes i did try that. I prefer Iambic A as Petr does, his experience
is identical to mine.
I had tried iambic B previous to your advice with no change, and i don't
use squeeze keying in any case. this is testing at 15 wpm.
The issue is random, and sometimes I can nearly get through a CQ
Good Evening,
There was little noise on either band. QSB was mild, except for
those east of the Rockies on 40 meters. There was a flutter on all of
you. Mostly it was reports of a chilly drizzle. Wind too. Cold wind.
Snow is in my forecast, sometimes I look forward to it.
I
Petr, I have exactly the same issue here, seems to be with keyer, and I have
a new paddle from Elecraft
Especially with the right dah key I have inadvertent dits generated before
and sometimes after a correct T send.
I often get a R or N, and it is very annoying. I have tried FW reload and
Accck Due to Contest ... do not go to 3.720 TRY 3.744 It is crazy
Looking for holes
We will try it
Paul KB9AVO
80 Meter net Control
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I do not know what mauve is either.
My wife says I had only 8 crayons in my box while she had 64!
I am amazed at her color perception and memory. She can look at a color
and go to the store and have them duplicate it exactly - even without a
sample for matching.
Having done professional
That usually leads to, "Sort of a light salmon, a little pinker,
bluish-green, and mauve" when I ask, Don. Males have no idea what mauve is.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 11/22/2020 1:45 PM, Don Wilhelm wrote:
Doug,
Try better lighting - I think you will find
And men are much more likely to have red-green colorblindness.
We only discovered that my father-in-law was colorblind when my
son was tested as being colorblind. My mother-in-law said, "So
that's why he always picked really badly matched ties."
73 Bill AE6JV
On 11/22/20 at 4:45 PM,
Make a picture of it your Zoom background.
73 Eric WD6DBM
On Sun, Nov 22, 2020, 2:37 PM Douglas Hagerman
wrote:
> Orly? Next time I go to a party or bar I will try it! That will be in
> about 2099 at the current rate, though.
>
> In the meantime, what do I do?
>
> Doug, W0UHU.
>
> > On 22Nov,
Orly? Next time I go to a party or bar I will try it! That will be in about
2099 at the current rate, though.
In the meantime, what do I do?
Doug, W0UHU.
> On 22Nov, 2020, at 3:24 PM, Eric Norris wrote:
>
> I can confirm that Don's suggestion not only works, but is a great
> ice-breaker at
I can confirm that Don's suggestion not only works, but is a great
ice-breaker at parties and bars :-)
73 Eric WD6DBM
On Sun, Nov 22, 2020, 1:45 PM Don Wilhelm wrote:
> Doug,
>
> Try better lighting - I think you will find the center stripe is
> actually red. Alternately, ask a woman to read
"Has anyone ever used real RS232 signal levels into one of these, or does it
actually only work with USB?"
The KAT500 will accept either TTL or real RS-232 voltage levels. The KAT500
serial data transmitter is not RS-232 compliant (swings between zero and +12 V)
and may not work with a true
Doug,
Try better lighting - I think you will find the center stripe is
actually red. Alternately, ask a woman to read the colors - their color
perception is usually much better than men's.
73,
Don W3FPR
On 11/22/2020 4:03 PM, Douglas Hagerman via Elecraft wrote:
I’m in the E850138 upgrade
Okay Don,
Thanks, will do.
Wes
On 11/22/2020 1:09 PM, Don Wilhelm wrote:
Wes,
Download the XG3 manual and look near the end (just before the schematic) and
you will see the wiring for a substitute for the KXSER cable. Build one and
plug it into one of your RS232 ports.
73,
Don W3FPR
On
I’m in the E850138 upgrade kit right now, and the included inductor L31 seems
to be a bit off.
The value listed in the instructions is 12 uH, but the actual part is a blue
ceramic inductor with stripes Brown-Brown-Black, which I read as 11 uH.
Does this seem like a packing mistake, and I
Install a ferrite bead on the cable between the radio and the K-Pod.
Solved my problem.
73, Lou KE1F
On 11/22/2020 3:29 PM, Randolph Boates wrote:
I am looking to see if this is familiar to others...
I have a K3S running FT8. KPod attached but no power connected. This K3S does not have
the
I am looking to see if this is familiar to others...
I have a K3S running FT8. KPod attached but no power connected. This K3S does
not have the front panel power mod. The KPod is connected to the front panel
with the appropriate cable. While running FT8, I was getting strange
intermittent
Wes,
Download the XG3 manual and look near the end (just before the
schematic) and you will see the wiring for a substitute for the KXSER
cable. Build one and plug it into one of your RS232 ports.
73,
Don W3FPR
On 11/22/2020 2:59 PM, Wes wrote:
Somehow I misplaced the data cable used to
Somehow I misplaced the data cable used to configure the KAT500. As I recall I
had the USB version but since I have more RS232 ports than USB ports available
these days I ordered what I thought would be a replacement.
Thanks for the tip!
best wishes Ed
john
On Fri, Nov 20, 2020 at 7:54 PM Ed Pflueger wrote:
> I think Dave W8FGU might have some Fixed Audio Out and PTT Kits for Sale.
>
> Ed.. AB4IQ
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
>
Hello,
There is a new version of Win4K3Suite available. This release has a number
of updates for the KPA1500 as well as some fixes for Log4OM.
Win4K3Suite is a full featured control program for the K3/S, KX3 and KX2.
It has a built in Panadapter that works with LPPAN and a sound card, as well
as
Huge thanks to the many who have offered advice on the subject of my K2
intentions- all very useful and am just printing out the hard copies of all
the e-mails so I can reread and think about it (always did prefer hard
copy!!)
I really appreciate all the responses so many thanks; you have
21 matches
Mail list logo
