Good Evening,
It was a good week. I felt like the snail on the side of a well
though. Some successes, some failures but I am still on the side of the
well. I wonder what the snail feels like when he reaches the top and
starts down the outside? There was some sun shining into my well.
Hope to "hear" many of you dare to check in on 3.817 at 0100 UTC Sunday
Nite/Monday morning tomorrow
See "hear" you on many nets tomorrow
Paul KB9AVO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: h
Try shortening your poll rate if you can, to maybe 500ms. I realize in some
cases that might be too fast for the K3, but play with that.
Also, serial ports are typically these days “eight, one, none.” I see you have
“eight, TWO, none.” Make sure your port is really configured that way. Unle
Well, here’s where we are. I’ve downloaded a new FTDI driver, but am holding
off on installing it as a last resort. Operationwise, I’ve whittled down to
size most of the problems, but the transmit timing is still not wonderful.
It starts transmitting within a second or two of when it should, lik
On 1/23/21 at 12:32 PM, fra...@pwpconsult.com (Bill Frantz) wrote:
I had similar problems to yours until I purged my system of all non-Apple
drivers.
Digging deeper into Richard's issue, I found this note I wrote
myself when I had a problem very similar to his:
FTDI Driver Issues on MacOX
We will be testing various mechanisms for attaching a keyer paddle to a remote
client. Stay tuned
73,
Wayne
N6KR
> On Jan 23, 2021, at 9:17 AM, K5WA wrote:
>
> Paul,
>
>
>
> I attended the "Demo" meeting last night and was told that Elecraft will
> release remoting software so you don'
I received this from Elecraft Sales:
It is our intention, if the equipment works properly, to record and
post that recording afterward.
I'm sure Eric will address that at the end of the webinar.
Regards,
Madelyn Gomez
Elecraft Sales
--Dave, W8OV
On 2021-01-23 11:02 AM, All
You should use the standard Apple FTDI driver. It works.
I had similar problems to yours until I purged my system of all
non-Apple drivers.
BTW, I am now running Mojave 10.14.6. I'm back here so I can run
my 32 bit applications like cocoaModem and cocoaNEC.
73 Bill AE6JV
On 1/23/21 at 11:5
Hi Richard,
I’ve never downloaded a driver to use my Mac with my K3S.
73,
John
WA1EAZ
> On Jan 23, 2021, at 11:50 AM, Richard wrote:
>
> Working hard to wean my K3s off a SignaLink and connect it directly via a
> standard A/B USB cable. Results have been frustrating but encouraging. The
> p
Paul,
I attended the "Demo" meeting last night and was told that Elecraft will
release remoting software so you don't have to have a K4/0, HOWEVER, the
further nuance to your question is probably "Can I use a paddle to send CW?"
That was not directly discussed but I'll bet the answer is no. I'
If you have a 3rd party FTDI driver installed, that may be part of the
problem. MacOS has had FTDI drivers since at least 10.12. I also would
seriously suggest updating to at least the last update of 10.13; 10.14
would be better.
73,
Chuck, AA3CS
— Engineer: "If it ain't broke I haven't messed w
Given that you are running generally older hardware and system software, you
probably don'tneed to worry about how "out of date" your FTDI driver might be.
(I'm running a 2017 iMac withBig Sur installed and working beautifully). I
assume that your USB hardware really is FTDI andnot one of the i
I use Node Red to control and monitor the KPA1500. I have written into the
flow to delay turn off of the amp when I click power off until the
temperature of the amp is down to 38 C. The fans are programmed to turn off
@ 39C.
This way I can walk away after clicking OFF and not wait for it to cool of
I had to miss the K4 demo on Friday evening. Will it be posted so we can view
it later?
Thanks! W0OUU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
Working hard to wean my K3s off a SignaLink and connect it directly via a
standard A/B USB cable. Results have been frustrating but encouraging. The
particulars are these.
Mac mini
Late 2012
2.5 GHz Intel Core i5
8 GB RAM
Running 10.12.6 Sierra
K3s 100
I’m going to try replacing th
I believe it was. I seem to remember seeing the record light on in the Zoom
window.
73 Bill AE6JV
On 1/23/21 at 10:36 AM, thedusty...@imaginarian.org (Rich NE1EE) wrote:
>
> ~R~
> 72/73 de Rich NE1EE
> The Dusty Key
> On the banks of the Piscataqua
~R~
72/73 de Rich NE1EE
The Dusty Key
On the banks of the Piscataqua
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This lis
The old boy Ben Franklin invented the lightning rod, and it uses a spark
gap to ground.
I over ground from my FAA training. Under the 6 foot concrete cube for my
tower is 10 foot copper
rod with welded ground cable that goes 30 feet up the tower to a large
ground clamp, for one.
Both of my
I always look at lightning protection methods as "mitigation" systems.
That is "to minimize damage" to the structure or equipment. As to
totally preventing damagethat is old ham lore.
73
Bob, K4TAX
Message: 27
Date: Sat, 23 Jan 2021 13:47:35 + (UTC)
From: Don Roberts
To:"elec
Question:
By grounding your antenna do you make it more attractive to a lightning
strike?
73, Lou KE1F
On 1/23/2021 7:53 AM, Lyn Norstad wrote:
We had a direct strike a few years back, and the results were interesting. In most cases
a gap of an inch or less vs. a direct connection made a h
In addition to everything else suggested, I disconnect all coax cables outside
my home and let them lay on the ground. I use a trailer type connector to
unplug my antenna rotator. I further use a heavy duty DPDT switch for my full
wave 80 meter loop, not to ground but to open. (lightning doesn'
Yes, this is the answer. The original KSYN boards didn't have a powerful
enough processor for high speed CW.
My K3 works just fine for my weekly QRQ sked at about 60 WPM, and at least
one other in the group runs a K3.
Barry W2UP
Klaus Koppendorfer wrote
> Put KSYN3A Synthesizer Upgrade Boards
We had a direct strike a few years back, and the results were interesting. In
most cases a gap of an inch or less vs. a direct connection made a huge
difference. The lightning took the easiest path to ground every time. But
that's the key ... you can't just "open" the line, it needs to be swi
Put KSYN3A Synthesizer Upgrade Boards into your K3 and CW Chars are ok at QRQ
high speed
Have done this mode on my K3 and got an completly another Radio also on receive
73
Oe6kyg
-Ursprüngliche Nachricht-
Von: elecraft-boun...@mailman.qth.net Im
Auftrag von dl2ki
Gesendet: Freitag, 2
Hi Andrew, Pete and Dave,
thank you very much for your feedback.
Yes, when searching the mailing list, it depends a lot on the search terms.
So sometimes the search is a bit difficult. I will therefore continue to
search with other terms.
The issue occurs with the K3 internal keyer and is alrea
25 matches
Mail list logo
