Good Evening,
Signals were fair to OK on twenty meters. Steve had fast QSB but
noise was low. Forty meters changed from the first minute onward.
Signals were strong but everyone faded with time.
Some signs of spring but only those to the south had flowers. There
are pockets of snow
No problem Eric, no ned for an apology; we all make an occarional oversight.
73 de W5SV - David F. Reed
> On Feb 28, 2021, at 21:40, Eric Lanzl wrote:
>
> For today's 20 M net I missed one station:
>
> W5SV Dave TX K3 5354
> Sorry for the omission.
>
> Eric WB9JNZ
Chuck,
I found an old copy of the K2 firmware update instructions with brief
descriptions of prior versions' feature changes using the Wayback Machine
(aka archive.org).
https://web.archive.org/web/20090822034804/http://elecraft.com/
Once at this archived page, select Manuals and Downloads in
For today's 20 M net I missed one station:
W5SV Dave TX K3 5354
Sorry for the omission.
Eric WB9JNZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Nate,
A couple more questions:
Does the KX2 do the same thing on CW?
Did Elecraft say anything about doing a TX gain calibration? This can be done
with the KX2 utility although I haven’t done it on mine, just on my K3. It sets
the per-band gain coefficients Be sure to save the current CONFIG
So is it true that the WKmini doesn't remember anything upon disconnecting?
w8lvn
On Sat, Feb 27, 2021 at 8:01 PM Julia Tuttle wrote:
> I don't think so -- you'd need an adapter that just doesn't connect that
> pin.
>
> On Sat, Feb 27, 2021, 20:19 Bill Lederer wrote:
>
>> Folks:
>>
>> I
The Elecraft 75 Meter net is moving to 3.835 at 01:00 UTC tonightdue to
busy frequencies
Paul KB9AVO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
3835 looks better right now.
Carl Yaffey K8NU
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com
http://www.timbrewolves.carl-yaffey.com
http://www.folkramblers.carl-yaffey.com
Http:www.clintonvillegrass.com
> On Feb 28, 2021, at 10:21 AM,
Here is the list of stations checking in to the 20m net today. Thank you to all
the relay stations for their help. I was not able to hear stations east of my
Illinois location. Relay help was needed today.
Please note, we have a zoom meeting on Sundays at 2000Z. For the link to the
meeting
That’s an informative link. But what is missing from the upgrade firmware
listings is the history of the upgrades. And they are not shown in the area
where you buy the upgrade chip. On the K3, the latest firmware upgrade lists
all the upgrade information from the beginning. Not so on the K2
> Audio is being fed from my PC to the K3's line input and I'm certain
> that the radio is in DATA A and the Config for MIC SEL is set to LInE
> In.
It *sounds like* you are still in AFSK A and not DATA A. By default
AFSK A has a narrow audio filter on the input of the modulator process
(DSP)
This is nothing new. Over 40 years ago I sold a Drake 4-line to a guy
who saw my ad in QST. The rig was in good operating condition, but he
decided to send it in to Drake for a complete overhaul/tuneup, new
tubes, etc. and subtracted the cost from what he sent me. Basically he
got a new
Yeah ... but the fact it is #36 with no fanfare would make me wondet
On Sun, Feb 28, 2021, 12:28 PM wrote:
> This is a little scary because at first glance this appeared to be a good
> listing with a 100% seller. The ad even included serial numbers. The "buy
> it
> now" price was ridiculously
This is a little scary because at first glance this appeared to be a good
listing with a 100% seller. The ad even included serial numbers. The "buy it
now" price was ridiculously low and the request that it be done outside of
eBay is against their rules. Plus I doubt that they would accept PayPal
I worked the RTTY contest yesterday using AFSK with N1MM. All worked
fine and I shut everything down when I was done. Today I tried to
operate FT8 but I can not get any power output.
Audio is being fed from my PC to the K3's line input and I'm certain
that the radio is in DATA A and the
I have replicated this behavior both with the internal as well as the MH3
external mic. Of course set at different mic gain levels, always per the manual
which as you said suggests 5 bars of ALC. I have tried lower and higher mic
gain settings just for fun, with the same results.
I don’t
The KX2 uses a control loop to set power. Make sure you have sufficient audio
drive to energize the loop. Using the ALC display set the MIC GAIN so you have
5-7 bars on voice peaks, per the manual.
What MIC are you using? Have you tried the internal MIC?
GL & 73,
Brian, K0DTJ
Here is the list of stations checking in to the Sunday 2-21 20m SSB net. Again,
a big thank you to the relay stations.
Call Name State Radio Serial # QRP
Notes
WB9JNZ Eric IL K3 4017
Due to people wishing to sit next to us and throw carriers ...
I am moving us a small distance away...
AND there is the chance someone will be there ... 75m is funny that way
Please take note of 3.825 3.825 at 01:00 UTC
Sunday night in the US and Monday morning in UTC Land
Keep smiling and be
I have that problem to.
My solution is to wind the power back from 10w to anything less and then back
to 10w.
Paul
W6PNG/M0SNA
www.nomadic.blog
> On Feb 28, 2021, at 5:52 AM, Nate Jedinak wrote:
>
> Hello! I recently purchased a KX2 (#757) from a friendly member of this
> list.
>
> I
Hello! I recently purchased a KX2 (#757) from a friendly member of this list.
I have a local 10m meetup I attend frequently, and I noticed a strange behavior
that I'm now able to replicate. When I first switch to 10m, I have extremely
low output power (one bar on the RF meter), even when set
Don’t attempt to use a standard RS232 cable with the K2. You should be
using a specially made cable which is shown in the manual.
73 Ian
On 27 Feb 2021 at 21:25:28, Dave Sublette wrote:
> Is the KUSB cable compatible with the K2? Should have asked this before I
> bought the cable. My K2
22 matches
Mail list logo