Jim,
You are remembering it incorrectly. The 1, 2, 5, and 10 buttons only turn
on SPLIT.
73, Tony K4QE
On Sat, Oct 1, 2016 at 9:06 AM, Jim McDonald wrote:
> Joe,
>
> The pitch in the K3 is still set to 1275 for my 1275/1445 low tones, and WW
> still has the Mark Offset of
Jim,
I had the same problems. Switched back to 5.38 and the problems went away.
I have not tried 5.52 to see if the problems were fixed.
73, Tony K4QE
On Sat, Oct 1, 2016 at 12:33 AM, Jim McDonald wrote:
> I installed K3 FW 5.50 to use my K-Pod, which I like very much. I
Mike,
WINE = *W*ine *I*s *N*ot an *E*mulator
You don't run Windows in WINE. You run Windows programs that are then
presented the Windows APIs by WINE. Think of WINE as a translator, not an
emulator.
I otherwise agree with your sentiment.
I prefer to run apps in their native environment.
Terry,
If you check out my QRZ page, you'll note that I have a USTower TMM-541SS
with a Yaesu G1000DXA rotator and a Force12 XR6 topping it off.
https://www.qrz.com/db/K4QE
The antenna is at 47 feet AGL and it covers 20 thru 6 with one coax.
The TMM-541SS nests down to 12 feet, and I also have
I am happy to report that my 11 year old son, who plays on a PS4, a Xbox,
and his own computer, participated in FD at my local club's operation for
his first time.
He made 63 Qs with help from Dear Old Dad on the GOTA station. He is also
studying for his Technician class license.
He said over
I have experienced the same thing. Please send your suggestions to the
reflector and not just to John privately.
Thank you.
73, Tony K4QE
On Mon, Jun 6, 2016 at 9:04 AM, stengrevics
wrote:
> I have installed the transverter and phase lock option, and have enabled it
Same here. Better physical design than the CM500 except for the boom mic.
Audio performance is the same.
73, Tony K4QE
On May 26, 2016 11:45 AM, "Brian Denley" wrote:
> I use the Koss SB45 headset. Works very well.
>
> Brian Denley
> KB1VBF
> Sent from my iPad
>
> > On
I just updated my P3 to the beta firmware. The symptom Gary described also
occurs here after I switch between SVGA data mode on/off. I find that I
now have to power cycle the P3 to get CW decode to begin flowing data to
Commander->WinWarbler again.
I did not have to perform a P3 power cycle
You can see pictures here:
http://www.n6ie.com/Elecraft.html
73, Tony K4QE
On Thu, Feb 18, 2016 at 8:18 PM, Steve wrote:
> In Dayton - 7 or 8 years ago, Elecraft was quietly showing what I recall
> was a 1.5kw solid state amp - perhaps as much as 2kw? Anyway they were
>
Jerry,
I highly recommend referring to this page for assistance in identifying
what you see in the waterfall display as well as what you hear from your
speaker.
http://www.w1hkj.com/modes/index.htm
Good luck with your new learning experience!
73, Tony K4QE
On Sat, Feb 13, 2016 at 1:09 PM,
This is what you want.
http://www.73cnc.com/category_s/46.htm
73, Tony K4QE
On Sun, Jan 10, 2016 at 3:51 PM, Phil Wheeler wrote:
> Well, Bob, maybe someone will give it a try and let us know what happens
> :-)
>
> 73, Phil W7OX
>
> On 1/10/16 9:47 AM, Bob McGraw K4TAX
For you DXpeditioners, it should be noted that the Koss SB-45 folds up
quite nicely for easier packing. See the Koss website's photos of them in
the folded up configuration.
https://www.koss.com/headphones/headsets/sb45-824
Thanks for the review of the headset, Dave!
73, Tony K4QE
On Tue, Jan
Classic Shell is free. It also provides the familiar Start Menu.
http://www.classicshell.net/
73, Tony K4QE
On Mon, Dec 28, 2015 at 11:54 PM, Doug Person via Elecraft <
elecraft@mailman.qth.net> wrote:
> Even simpler - right-click on the little speaker icon in the lower right
> (the task bar).
You can find it here:
http://www.qsl.net/v73ns/backyardwireantennaes.pdf
73, Tony K4QE
On Fri, Dec 11, 2015 at 10:33 AM, Robert 'RC' Conley
wrote:
> If you are able to locate L.B. Cebik's FDIM presentian on his TOP FIVE
> MULTIBAND BACK YARD ANTENNAS this is a very good
Worked fine here...using Chrome 46.
Nice demo, Steve!
73, Tony K4QE
On Fri, Nov 6, 2015 at 4:43 PM, Chester Alderman
wrote:
> No audio on your video?
>
> Tom - W4BQF
>
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On
The clicks are there regardless of the level of the AF gain setting. The
loudness of the clicks is affected by the AF gain setting, but they are
still there.
I'm using a Yamaha CM500 headset.
It is the strongest when moving between the 0.10 and 0.15 bandwidth
setting, but also occurs going
I note the popping here as well.
K3 #6478 with new synths and FW REVS uC-5.38, d1-2.86, d2-2.86, FL 1.25, dr
1.03.
Also have 700Hz and 250 Hz filters installed.
73, Tony K4QE
On Sat, Oct 17, 2015 at 8:34 AM, N2TK, Tony wrote:
> I can't duplicate it here on either K3.
>
Have any of you who are complaining seen the prices of speakers from other
radio manufacturers? How about the other third-party speaker makers?
Elecraft is in the ballpark.
A lot of folks asked (begged, bugged, pestered...) Elecraft to come out
with a speaker for the line. They finally
Yes, same observed here.
73, Tony K4QE
P3/wSVGA #2058
On Mon, Aug 3, 2015 at 9:58 PM, Charles Johnson k4...@icloud.com wrote:
Just received the P3TXMON and installed same. Updated firmware to 1.50.
Now I notice the -dBm scale on the left of the display has the increments
always ending with a
Byron,
Check this one out...
http://www.dl2rum.de/rumsoft/RUMsoft_Home.html
73, Tony K4QE
On Fri, Jul 10, 2015 at 7:37 AM, Byron Peebles n...@arrl.net wrote:
With my migration from TenTec to Elecraft, I was planning to also move my
logging and station control from Windows to MacOSX. I have
I also suggest that everyone should consider the other shipping options
available.
I chose USPS Priority Mail, and it was significantly cheaper than UPS
Ground.
It pays to look at all the options.
73, Tony K4QE
On Sat, Feb 14, 2015 at 9:55 AM, Gary Smith g...@ka1j.com wrote:
I second this.
That is incorrect. The purchase price is directly affected by the exchange
rate. They even provide a link to xe.com on their website so you can
figure out the actual cost in $USD. Be aware that there is still an
exchange rate fee charged by your bank when you make the transaction, so
the final
http://www.mfjenterprises.com/Product.php?productid=MFJ-856
73, Tony K4QE
On Sun, Nov 9, 2014 at 8:16 AM, Gerry leary gerrylear...@icloud.com wrote:
Where do you get antennas like the one you use for finding noise?
Sent from my iPhone this time
On Nov 1, 2014, at 7:16 PM, Dale Parfitt
The case is clearly not sealed. Notice the gaps on all four sides of the
panel insert. Is it enough? Maybe...
Of course, the user should keep the entire case in the shade, too.
73, Tony K4QE
On Fri, Jun 6, 2014 at 12:30 PM, Howard Hoyt hh...@mebtel.net wrote:
Hi Ken, list,
I've done
Yes, it's true. JPS (Japanese standard) is ever so slightly different
from the American standard.
73, Tony K4QE
On 5/3/2014 12:37, David Cole wrote:
A friend of mine mentioned that the screws used in Icom radios and such
were some special type... He even bought some special screwdriver for
Oops...meant JIS...
On 5/3/2014 12:56, Anthony Scandurra wrote:
Yes, it's true. JPS (Japanese standard) is ever so slightly different
from the American standard.
73, Tony K4QE
On 5/3/2014 12:37, David Cole wrote:
A friend of mine mentioned that the screws used in Icom radios and such
were
You read it wrong, Fred. Johnny is selling the MAIN VFO knob, which is
sold new for US$105. The SUB VFO knob is US$55.
73, Tony K4QE
On Sun, Feb 23, 2014 at 6:25 AM, Fred Smith m...@totalhighspeed.com wrote:
I'm seeing the new price of that knob on the link you posted as $55. Did
you
make
Array Solutions sells a design by W3NQN.
http://www.arraysolutions.com/Products/BCB%20RF%20Filters.htm
Good luck!
73, Tony K4QE
On Sat, Feb 22, 2014 at 11:10 AM, Dale - K7DNH dh2...@sbcglobal.net wrote:
I believe I have finally experienced broadcast interference... at least I
hope that is
I could not reproduce this problem.
I have the latest firmware (including beta releases) on all of my K-Line
(K3, P3, KPA500, and KAT500).
73, Tony K4QE
On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T st...@ai9t.com wrote:
Anyone have any problems with the new Firmware. I installed the firmware
Unfortunately for us, they only have several more days, not weeks, Jim. :-)
Good luck to all who continue to pursue them!
73, Tony K4QE
On Sun, Feb 2, 2014 at 12:50 AM, Jim Brown j...@audiosystemsgroup.comwrote:
. 2/1/2014 9:43 AM, Rick Stealey wrote:
Some great photos
Best evidence
This is an excellent suggestion and requires minimal changes to the
existing procedures.
73, Tony K4QE
K3 #6478
On Fri, Sep 13, 2013 at 1:22 PM, Edward R Cole kl...@acsalaska.net wrote:
N7SP etal:
If I may make a suggestion that might make KX3 checkin easier. On other
nets that I often
Why would anyone even think of not buying these cables direct from Elecraft?
You KNOW they will work, they are fairly priced, and they will arrive at
your door FAST.
73, Tony K4QE
On Sun, Jul 28, 2013 at 12:56 PM, Richard Neese kb3...@gmail.com wrote:
db15 y= vga y cable
It's gone production, Art.
73, Tony K4QE
On Sat, Jul 20, 2013 at 10:14 AM, Art KZ5D k...@aol.com wrote:
Hi all,
Tried to download the latest Beta version 4.67, but do not see a zip file
when I go to the ftp site. Has there been a change?
73,
Art KZ5D
Arie,
Please see the firmware release notes here:
http://www.elecraft.com/KAT500/kat500_software.htm
73, Tony K4QE
On Sat, Jun 29, 2013 at 7:02 AM, Arie Kleingeld PA3A p...@xs4all.nl wrote:
Hi all,
KAT500 + KPA500 connected to K3 through coax and elecraft interfacecables.
NO antenna
Todd,
This will do it for you. All Radio Shack parts.
One Y adapter -274-375
One audio extension cord - 42-2492
Two audio cables - 42-2434
Plug audio extension cable into K3.
Plug Y-adapter into extension cable.
Plug both audio cables into Y-adapter.
Attach wires from audio cables to speakers.
$145 each + shipping.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Josh Fiden
Sent: Friday, June 14, 2013 3:07 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Custom 700 Hz 8-Pole INRAD Filters for Field
Day
powerwerx.com model SS-30DV. Quiet, no RF hash, small, and light. I have had
it for just over a year now, and it has been on one DXpedition.
73, Tony K4QE
From: Peter Chamalian w...@arrl.net
To: elecraft@mailman.qth.net
Sent: Tuesday, June 11, 2013 9:18
59 here in central North Carolina.
73, Tony K4QE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
More info...
http://www.short-wave.info/?station=SOH%20Xi%20Wang%20Zhi%20Sheng
http://shortwavedxer.blogspot.com/2011/07/soh-xi-wang-zhi-sheng-sound-of-hop
e.html
73, Tony K4QE
__
Elecraft mailing list
Home:
Fun is in the eye of the beholder.
Pardon the wordplay, but I think it is clear that everyone has their own
vision of fun.
It depends on the operating circumstances as well.
No easy answers...
73, Tony K4QE
__
Elecraft mailing list
Phil,
It's the same cable as for the K3. When I need to do the more rare KPA500
firmware upgrade, I just switch it over temporarily to the KPA500.
73, Tony K4QE
On Sun, Dec 16, 2012 at 5:54 PM, Phil Hystad phys...@mac.com wrote:
Gang,
OK, I was going to update the firmware with the latest
You don't need to add 8 foot wires for 10 meters. The 80 meter dipole will
load up there with a little help from the tuner.
73, Tony K4QE
On Sat, Dec 8, 2012 at 7:27 PM, Ron D'Eau Claire r...@cobi.biz wrote:
If you want to use your 40 meter dipole on 20 meters, one way is to add two
16 foot
An OS, by itself, is useless without user level tools and applications.
When considering Windows vs. Mac OS vs. Linux, you must consider what apps you
intend to use with it.
I am a UNIX/Linux bigot. I also like MacOS. But, I use Windows in my ham shack.
Windows is, by far, the most well
But callsigns are not words. How does this factor into the copy in your
head whole words method?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
No one ever said Elecraft was perfect.
However, in my experience, NO ONE comes close!
Keep it up, Elecraft!
73, Tony K4QE
On Friday, June 1, 2012, Kevin Cozens wrote:
On 12-06-01 11:39 AM, Hisashi T Fujinaka wrote:
Wow. While I'm one of the Elecraft isn't perfect people, you're
Bob,
I received an email confirmation just a couple of days after I got home
from Dayton.
I placed my order on May 18th at the Elecraft booth.
Projected ship date is August 15th.
73, Tony K4QE
On Fri, Jun 1, 2012 at 7:04 PM, Bob k...@att.net wrote:
On a different Front Office note.
Has
David,
This applies to ANY competition class radio, not just the K3.
I strongly recommend AGAINST bringing out your radio out unless you know for
a fact that those who will be using it know how to use it already.
If it is a free-for-all, you should only take out a radio that is
dead-simple to
47 matches
Mail list logo