I have to temporarily re-arrange my amp table to troubleshoot one of my two
amps. The only way to do it is to move the kpa1500to my main desk and place it
on its left side with the rubber feet. I know heat rises but once the fans
come on it should direct the heatout of the normal top vents.
Joe
There are 3 groups. Group one has at least 2 days. Group one day two orders
should be filled by mid May. Do you know how many days arein group one? I
know I don't, hi. I don't even know what group I am in.
GL with your order. I am not gonna get too excited about expected shipping
Gee, who actually owns a K4 to push the buttons? I didn't know anybody out
there had one yet. Hoping I get mine before the Fallcontest season.
BillK3WJV
On Friday, April 16, 2021, 1:36:05 PM EDT, Wayne Burdick
wrote:
In the UPDATE function of the K4, there's a DETAILS button which
I too couldn't believe all the advice given on how to properly ascertain you
were on frequency on an ssb signal. And just how do youzero beat an ssb
signal? You would have to know what the person actually sounds like in person
for one thing. Does he sound likeDonald Duck or Darth Vader?
Get
I just keep it on until the temp dies down. If I'm in a hurry to shut it off
I turn the fans on manually to cool it faster.
BillK3WJV
On Thursday, January 21, 2021, 5:59:20 PM EST, Howard Sherer
wrote:
Wouldn't it be a good idea to keep the fan turned on in the KPA-1500 after
you
first etc (mines a bit old).
73 de David, M0XDF (K3 #174, P3 #108)--
Always remember, half the people in the world are above average intelligence!
On 31 Jul 2020, at 07:00, Bill Stravinsky via Elecraft
wrote:
I just bought that KIO3B card a few weeks ago. Nice to just have the USB
cable do
on fitting. i.e. did you do a F/W upgrade first etc (mines a bit old).
73 de David, M0XDF (K3 #174, P3 #108)--
Always remember, half the people in the world are above average intelligence!
On 31 Jul 2020, at 07:00, Bill Stravinsky via Elecraft
wrote:
I just bought that KIO3B card a few weeks ago
I just bought that KIO3B card a few weeks ago. Nice to just have the USB
cable do the work of the serial connection and have the audioon its own codec.
Still available from the factory as far as I know.
BillK3WJV
On Wednesday, July 29, 2020, 10:18:47 AM EDT, Roger D Johnson
wrote:
In the event you have a very old K3 (serial number approx 3000 or earlier) you
might need to replace some plugs on the final amp. As has beensuggested the
first thing to do would be to contact Elecraft.
Good Luck.
BillK3WJV
On Sunday, April 12, 2020, 2:11:23 PM EDT, Nr4c wrote:
When the KPA1500 came out I was one who said I should wait for it to be fully
tested and out for a while before thinking about getting one. That is why I
fairly earlysent my full deposit in to get the free shipping and get on the
waiting list, hi.
I did the same thing on the K4 and I did good
In the recent 10 mtr contest over the weekend, after just a couple
transmissions the display goes berserk and then just displays "28 MH with PWR
under that".Then when transmitting the PWR will read anywhere from 1 to 4
digits of the power. It will stay that way until the amp gets switched off
The problem is in the male and female connectors. I don't think a shorter
power cable will do anything. There is no substitute for replacing the
connectors.When I had mine act up Elecraft sent me the wrong parts. I had a
contest coming up and wouldn't have enough time to get the correct
Somewhere around 1980 I was talked into buying a power supply at a hamfest by
my good friend who was a great technician. He told me it was a terrific deal.
He was right. I don't remember what I paid for it but I know it was lessthan
$100. It was a 56 amp rack mounted Llamda metered supply.
Wayne
Please stop trying to distract me. I am trying very hard not to visualize the
K4HD taking the place of my ft1000mp already sitting next to my loaded K3 with
P3 (K3 purchased in 2009 serial #2995).I also replaced my manual tune Alpha
with the KPA1500 (serial #153) and that combo is one
Yeah, the 7610 surely resembles the K4. But how different can you make a rig
with 2 vfo's and touch screen very much different looking. Take the top and
bottomcovers off each rig and see what's inside and hook each up to an antenna
and see how they perform in contest condx copying some weeny
The K3 gets warm (very warm actually) just sitting there without xmitting, hi.
Especially the right side closer to the front. That is just normal. That was
in a post many months ago.
BillK3WJV
On Sunday, December 9, 2018, 6:51:38 AM EST, eric norris via Elecraft
wrote:
Has there
If there is no way for you to send band data from the kx3, the kpa1500 should
change it's band with one transmitted dit, same as the Acom2000a.
BillK3WJV
On Monday, October 8, 2018, 7:48:32 AM EDT, eric norris via Elecraft
wrote:
Is there a way to send band data from the kx3+kxpa100
A suggestion I didn't see suggested - mine is ditch the cw readers. If you
use a reader, cw is going to be purely digital and its not meant to be that.Its
not ft8! Yes get over the shy thing too. You won't get a report card on your
Qso ability. You know what they say - the more you do it -
I opted for a 2.1 ssb filter hoping to be able to enjoy phone contesting just a
little bit more but so far I haven't found the magic elixir for phone.I only
replied to the post after seeing "information garbling" from Don. That is
exactly what happens to me with whatever filter or
Interesting. I just told my friend W2irt that it was OK for vertical mounting
of the power supply from the several posts on here a few months ago and I
thought onewas from Elecraft. Its hard to imagine vertical placement of the
power supply being a problem. It never even approaches getting
Yup, you can run the power supply vertically just fine.
BillK3WJV
On Monday, August 20, 2018, 12:12:16 AM EDT, Peter Dougherty
wrote:
Hi All,
My KPA-1500 arrived over the weekend and I've not gotten a chance yet to set it
up. In looking at both the amp and the power supply I noticed
I noticed this problem shortly after getting my 1500 back in May. I only see
this problem on 40 mtrs for some reason. I've never seen a 10 degree
fluctuation but itis regularly 6 degrees and has approached 8 degrees. I only
work cw for the most part. I see it all the time when the duty
Love the Kpod. Even though I was very comfy with the RIT even with the tiny
knob, I got very used to it. But during a contest it required reaching across
the keyboardand taking my right hand away from the keyboard. The Kpod sits
right next to the number pad. I only ever use it for RIT, not
I purchased two aux cables so I could put the amp on a separate side table
with my Acom 2000A. It was interesting that I never got a direct answer on
theexact length of a single cable, hi, but the two cables together were a
perfect decision.
BillK3WJV
On Saturday, June 16, 2018, 10:31:43
I have a foot switch but only use it generally on Sunday of a weekend contest.
That's when my throat needs unfleming or whatever that iswhen your voice is
overworked but I always just use vox if possible. In the older days it was PTT
but with a desk mic and not a foot switch.But my foot
Well said, Don, and I agree. Its not an issue with me either. Even though
its my first solid state amp I realize the need to cool it. They're already up
to suggestingwater cooling. I think we need to talk about hydrogen cooling,
something the radio room on the Enterprise from Star Trek
Jim
Thre only fan speed option on the LCD screen is the manual setting. When the
fans operate on auto there is no indication other than hearing the difference.
BillK3WJV
On Saturday, June 2, 2018, 10:27:14 PM EDT, Jim N7US wrote:
Sorry, I forgot that I'm asking about the KPA1500.
I had asked Elecraft back in August when I ordered my 1500 about making a
longer cable.
This was the response back then:
Thanks for the contact. To your questions on the AUX cables, you can actually
connect 2 of them in series without a problem. This will give you about 6 feet
of cabling.
After I ordered my kpa1500 back in August I asked that same question to
Elecraft. My intent was to make my own AUX cable to put the amp where I
wanted.The response was that the AUX BUS can only be so long and it was hinted
that about 7 or 8 ft might be the most you should have. Since one AUX
So far for the short time I've had the 1500, I've used it very heavily in WPX
CW recently. At constant running , sometimes getting no answers which is
probably max duty cyclefor this kind of operating, I never went over about 74
degrees C which kicks in fan speed 3 (I think, hi, I had it
-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Stravinsky via
Elecraft
Sent: Friday, June 1, 2018 7:33 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] KPA-1500 Fan Noise - YouTube ?
Rich
You pretty much hit the nail on the head about solid
Rich
You pretty much hit the nail on the head about solid state amps. As they say
there's no free lunch. Solid state has made great strides in high power
ampsbut its still solid state and a p/n junction or some form thereof. 1500
watts of heat in those junctions has to be cooled down or it
Yup, as the temp climbs the output drops some. Even though I'm glad I got the
solid state amp I still prefer tubes, hi. The drop is anywhere between 100 to
maybe 300 watts.I never really noted the exact numbers.
BillK3WJV
p.s. I'm thinking its a normal solid state thing.
On Wednesday,
John
I would imagine the 1500 will be remotable just as the 500 is. A friend of
mine remotes his 500 to the basement just as he did with his Acom 2000aand he
is investigating remoting the 1500 he just got. As for a control box I don't
know. Not sure if the amp faults will be visible in the
Yeah the fans are pretty noisy especially when CQing without answers which
keeps the amp duty cycle high. At least when you get answers the amp has a
chanceto cool just a bit and keep it below 70C which is where the hyper drive
fans come into play, hi. I'm still happy with the amp for
I'm thinking there will be a firmware update to fix this. I don't have a Y
box but the only menu choice in the K3 is kpa500 and that is what I see from
the 1500on the K3 display although it might already be fixed as I haven't
upgraded firmware in a while.
BillK3WJV
On Sunday, May 27,
Scott
Are you also getting temp fluctuations in xmit and how much? Mine is dependant
on the temp, at lower temps the fluctuation is less than if up at 60Cand mine
only happens on 40 mtrs. Spoke with an Elecraft engineer and this could
possibly result in a mod surrounding the temp sensor.
be a fix that is needed
to cure this if the temp swing istoo much.
Film at eleven.
BillK3WJV
On Monday, May 21, 2018, 12:58:37 AM EDT, Bill Stravinsky via Elecraft
<elecraft@mailman.qth.net> wrote:
In the last few days I have made about 21 Qso's with the new amp casually and
about
don't go on, that means the fan on the top is
cooling the amp.
Chuck Hawley
c-haw...@illinois.edu
Amateur Radio, KE9UW
aka Jack, BMW Motorcycles
From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on
behalf of Bill Stravins
If you are going to depend on those 2 fans sucking hot air out of the amp
instead of using the internal fans that push it where it needs to go, I think
you arepulling hot air out of the amp and that hot air has already done its
damage.
BillK3WJV
On Monday, May 21, 2018, 3:29:29 PM EDT,
That doesn't move any air across the heat sink or solid state devices that
need the air. The air that comes out of those vents starts at the fans in the
rear.
BillK3WJV
On Monday, May 21, 2018, 6:07:22 AM EDT, Roy Koeppe wrote:
All,
My solution is two 4.5-inch,
In the last few days I have made about 21 Qso's with the new amp casually and
about 75 Q's in a few contests over the weekend. The first night I had a
problem that seemedto disappear. It only happened on 40mtrs. I was xmitting
and the power dropped like I went into stby but no indications on
About time, thank you Eric, hi.
I contemplated adding to the whines and wishes but decided against it. I think
the quote by an NFL player "for who, for what" crept in my head.
But I guess while I have the space now to make one comment, no matter what is
in any radio on my desk, the only thing
art/stop temps and
speeds? I would like a little more hysteresis in the 60c setting: start
at 60c but continue cooling until temp drops to 50c. That might work a
little better when running digital modes with long Tx/Rx intervals.
-larry (K8UT)
-- Original Message --
From: "Bill Stra
called for by the internal heat sink
temperature. If you use 0 the fans will be off until needed. This
is not related to the fans in the power supply.
73
Bob, K4TAX
On 5/18/2018 2:41 PM, Bill Stravinsky via Elecraft wrote:
> After having played with mine extensively last night, I wa
ALC is adjustable but it is recommended to just set your per band drive level
for desired output. You can set the ALC thresholds fairly high to not allow
ALC to affect
your output unless under extreme condx.
BillK3WJV
On Sunday, May 6, 2018, 10:24:43 AM EDT, James F. Boehner MD via
After having played with mine extensively last night, I was under the
impression that the fans would come on automatically when the temp reached a
certain degree.That is not the case. Mine was defaulted at fan speed zero,
which is fans off. You have to change the menu item for fans to one of
If you have an older K3 there was a problem with them generating a spur. I
had the problem when a friend reported hearing me on a 2nd freq.I'm guessing
nobody still has an older K3 though with this problem.
We have determined that a small number of K3/100s and KPA3s left the factory
earlier
Serial #153 arrived on time yesterday May 15th. yowza
BillK3WJV
On Monday, May 14, 2018, 1:12:10 PM EDT, Bill Stravinsky via Elecraft
<elecraft@mailman.qth.net> wrote:
I have been watching all the posts about guys getting their 1500's and hoping
to not have to watch anymore.
I have been watching all the posts about guys getting their 1500's and hoping
to not have to watch anymore. A good friend got his email notice on April
19th.We ordered on the same day (August 25th) so I just knew I had to be
getting my notice. Well the days then weeks past. Last week I got a
I have been watching all the posts about guys getting their 1500's and hoping
to not have to watch anymore. A good friend got his email notice on April
19th.We ordered on the same day (August 25th) so I just knew I had to be
getting my notice. Well the days then weeks past. Last week I got a
Don, I just read your article to see what the hubbub was about with AGC. I
live in a rural area in the woods so noise is really not a problem.
I was taught a long time ago to keep the AGC off for weak signal reception and
it stuck with me. Those were the S line days. And in your
article you
I never use AGC on cw, only on ssb (and that ain't too often, hi)
Bill
K3WJV
On Thursday, April 26, 2018, 1:17:25 PM EDT, Leroy Buller
wrote:
Hello all. Long time posting here. I am interested in CW AGC settings you
like on your K3. I have been fooling around
All this talk about how great Diversity is had me wondering, but when I try
it out I realized I had to move the receiving antenna to the Aux RF jack.
The Kady boom mentions using an RF splitter to allow the receive antgenna
to be used for both purposes.
What have other members of the list used
A friend of mine (100 miles away) recently noticed a dual signal being
transmitted from my K3 possibly coming to lightsince I went to high power. The
problem has surfaced when I xmit on 40 & 80 (don't know of other instances).
Thereis a duplicate signal 18khz lower on cw, reduced of course
Not sure why I needed to know about an Icom 7300 and am guessing it has a
touchscreen. Leave the touchscreens
to the smart phones, IMHO. If I had a smartphone I wouldn't have a problem
with its touchscreen. I have 3 laptops and have mice for all of them, can't
stand touchpads either.
When I first got my K3 in 2009 I thought the QSK was fabulous and used it every
so often. Then for a few years I was working too much and wasa little
inactive. I finally retired and heavy into ham radio once again. I got the
KXV3B for the preamp and had to jump from version 3 somethingmcu to
57 matches
Mail list logo