Interesting conditions with short skip noticed in the south and northeast. K1NW
took net control for Eric with able assistance from Paul, Steve, John and Jim.
Please join us next Sunday, 1800z on 14.3035 MHz. Cheers! Brian
Check InCall NameSt Rig
1K1NW
welcome!
Brian, K1NW
1 K1NWBrian RI K4 #863 logging, relay
2 WB9JNZ EricIL Yaesu FTDX101MP net control
3 W9PCS PaulWI K4D #620
4 K8NUCarlOH K4D #1228
5 W9EJB Ed IN K4D #498
6 NK9A
If we are unable to get a net slotted into our usual frequency Eric is planning
on moving up to 17M - 18.115 MHz. 1800z. Any frequency changes will be
announced on NetLogger as well.
Brian, K1NW
__
Elecraft mailing list
Home: http
original boxes.
Please contact me off list if you are interested. Thanks, Brian, K1NW.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Good conditions today. Thanks to Eric for being net control and Dave for
logging. Please join us every Sunday afternoon at 1800z on 14.3035 MHz. -
Brian, K1NW
CI# Call Name ST Rig
1 WB9JNZ Eric IL FT-DX101D (nc)
2 N6JW John CA K3 (rel)
3 K1NW Brian RI K4D #863 (rel),(log)
4 K8NU Carl OH K4D #1228
- will
not separate. Comes with all manuals and needed cables. $2,600 firm plus $100
shipping within continental USA. Or pickup within 50 miles of RI. Works great
so sold as is. Built as kits, so will not be in the original boxes.
Please contact me off list if you are interested! Thanks, Brian
Good Conditions today with some QSB. Don't forget to join us next Sunday at
1800z on 14.3035. Brian, K1NW
1 K1NW Brian RI K4D #863 (log),(rel)
2 N8SBE Dave MI K4D #1358 (log),(op)
3 WB9JNZ Eric IL FT-DX101D (nc)
4 K8NU Carl OH K4D #1228
5 W9PCS Paul WI K4D #620
6 KK5LD Dan TX K3 #986
7 K1N
Conditions were pretty good today. Eric, WB9JNZ, ran the net with help from
N6JW and WM6P. The Russian radar made reception tough for the west coast
operators. Please join us next Sunday at 1800z on 14.3035. - - Brian, K1NW
1 K1NW Brian RI K4D #863 (log),(rel)
2 WB9JNZ Eric IL FT101D (nc)
3 N6JW
Conditions were much better this week and we had 32 check-ins.
CheckIn Call Name State Rig Notes
1 K1NW Brian RI K4D #863 (nc),(op)
2 N6JW John CA K3 #936 (rel)
3 K8NU Carl OH K4D #1228
4 W1NGA Al CO
Band conditions were noisy and some QSB, but we still had a good time. The
net will meet again next Sunday at 1800z on 14.3035 MHz. Join us if you
can! - - Brian, K1NW
*CI # Call Name ST Rig *
1 WB9JNZ Eric IL FT101D (nc)
2 K1NW Brian RI K4D #863 (rel),(logger
checked in,
and especially Jim, NC0JW for relaying in about half the stations!
Brian, K1NW, logger
CI # Call Name State Rig (Elecraft S/N)
Notes
1WB9JNZEricIL FTDX101D
(nc)
2N6JW
checked in, and especially Jim, NC0JW for relaying in about half the
stations!
CI # Call Name State Rig (Elecraft S/N) Notes
1 WB9JNZ Eric IL FTDX101D net control
2 N6JW John CA K3 relay
3 K1NW Brian RI K4D #863 logger, relay
4 KD2VBH Gregg NJ TS-890
5 KK5LD Dan TX K2 Clone
6 K8NU Carl OH K4D #1228
7
WM6P Steve GA K4D
7 K8NU Carl OH K4D
8 K1NW Brian RI K4D logger, relay
9 N2TNQ Len NJ K3 #5270
10 NC0JW Jim CO K4D #1560 relay
11 W1NGA Al CO K4 #1473
12 W3SA John
Conditions on 20M were much improved this week. We experimented with
Netlogger for the first time and muddled through - thanks to Paul and Dave
for logging. Please join us next week at 1800z on 14.3035 MHz and monitor
the net on Netlogger (download from netlogger.org).
Check-ins:
1 K1NW Brian
need are good band conditions!
Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Hi all:
I have a new PC with Windows 11 installed. I cannot figure out how to
install the drivers for my Navigator. Can anybody walk me through it?
Thanks and 73 de Brian W3BW
*Brian F. Wruble, C.F.A.
The Conch Republic
"We seceded where others f
The Elecraft 20M SSB net met Sunday, August 11th at 1800Z on 14.3035 MHz.
Conditions were again poor bad with a K of 5+ and heavy QSB. Paul, W9PCS,
served as Net Control with help from relays Steve - WM6P, John - N6JW, Jim
- NC0JW, and Brian - K1NW. We checked in 23 stations. Again no QRM from
The Elecraft 20M SSB net met Sunday, August 4th at 1800Z on 14.3035 MHz.
Conditions were pretty bad with a K of 7+ and heavy QSB. Thanks to relays
Steve, WM6P, John, N6JW, and Jim, KO5V, we were able to check in 26
stations. On the bright side there was no QRM.
Check-Ins
K1NW Brian
Hi guys,
I just installed a new K4. I have a KPA1500 that works beautifully with my
K3. I can't figure out how to get the KPA1500 to power on when the K4
powers on. Any hints?
Tnx es 73 de Brian W3BW
*Brian F. Wruble, C.F.A.
The Conch Republic
"We seceded where oth
The Elecraft 20M SSB Net met on 14.3035 Mhz from 1800 to 1822 UTC. Conditions
were poor with QSB. Thanks to all who checked in, Eric, WB9JNZ, will be back
next week.
Call Name State Rig SN
K1NW Brian RI K3 936 NC
N6JW John CA K4D 1228
Eric, WB9JNZ, was off in Norway so Brian, K1NW, stood in as net control with
relays John, N6JW, and Steve, WM6P. Odd propagation and heavy QSB. The net will
meet again next Sunday at 1800Z on 14.3035 MHz.
CALLNAMESTATE RIG (SN)
%ECLIPSE
I built a QRPGuys noise bridge a while back. Fun kit.
https://qrpguys.com/test-equipment
73,
Brian, K0DTJ
> On Mar 30, 2024, at 13:43, Bruce Rosen wrote:
>
> I see that Elecraft no longer sells the N-GEN wide band noise generator.
> My N-GEN, which I built in 2010, seems to
We had a brief net today at 1800Z on 14.303.5 MHz. Conditions were noisy and
much QRM from the ARRL SSB Contest. We still managed 11 check-ins with help
from relay stations. We ended early as a station was running nearby and were
are causing him QRM.
K1NW Brian RI K4D #863 (net control)
N8SBE
The 20M Side Band net met today at 1800Z. Conditions were poor with a high
noise level and QRM from the NC QSO Party (thanks to KA4HIM for graciously
moving when the net started). Eric, WB9JNZ, was busy with family so Brian,
K1NW stood in as net control with the helpful relaying of John (N6JW
Hi Jim,
I’ve discovered that it’s easier to see a very weak signal on the waterfall
than in the amplitude plot. Setting the SVGA screen for 25% spectrum and 75%
waterfall gives lots of space to see dim traces. You may have to adjust the
threshold a bit.
73,
Brian, K0DTJ
> On Dec 17, 2023,
. Maybe turning
the pot stop to stop a half dozen times will improve it?? Worth a try.
73,
Brian, K0DTJ
> On Nov 29, 2023, at 12:12, Pete Smith N4ZR wrote:
>
> My 2400-serial number K3 has begun to have a sporadic receive problem, which
> has gotten much worse recently. It&#x
There was a time when one could email Elecraft support with the K3 serial
number and they would send the factory Config file. Probably not 100% of the
solution but it would be a start.
73,
Brian, K0DTJ
> On Oct 17, 2023, at 09:05, W3FPR wrote:
>
> Jim,
>
> It is doubtful
I bought my KX2 #11xx in November 2016, to give you a data point on age. In
addition to Mike’s info, I’d suggest downloading the firmware release notes
from the website. Lots of upgrade info not included in the printed manual.
Hope you enjoy your KX2; it’s a gem.
73,
Brian, K0DTJ
> On Ju
better next week!
73,
Brian, K0DTJ
> On Jul 2, 2023, at 17:26, kevin wrote:
>
> Good Evening,
>
>Twenty meters was fairly quiet but minimally productive. There was little
> thunder storm noise on either band. That should give me a hint. On forty
> meters Dwi
in a row to get
it right. It’s been fine since.
GL&73,
Brian, K0DTJ
> On May 20, 2023, at 00:50, Mikael Larsmark wrote:
>
> Hi,
>
> We have an early serial K3 which has got an issue with power spikes. I have
> done a TX gain calibration without it making a differenc
For sale is my K2/100. In January, Dave Van Wallaghen of W8FGU Services
performed an alignment/calibration and installed the KPA100 upgrade kit. From a
non-smoking home in very good condition.
The K2 is fitted with the following options:
KNB2 noise blanker
KSB2 SSB adapter with mic jack con
For sale is my K2/100 in very good condition. In January of this year Dave Van
Wallaghen of W8FGU Services performed an alignment and calibration and
installed the KPA100 upgrade kit.
The K2 is fitted with the following options:
KNB2 noise blanker
KSB2 SSB adapter with mic jack configured f
Elecraft 20M SSB Net 4/16/2023
K8NU Carl OH K4D #1228
K1NW Brian RI K4D #863 (Net Control)
W9EJB Ed IN K4D #498
KE2EF Ed FL K4D #1254
W3SA John NC K4D #616
W9PCSW Paul WI K4D #620
K7BRR Bill AZ K3 #2963
AC9XN George IN Icom IC-7300
N8SBE Dave MI K3S #11361 (Relay)
AE6JV Bill NH K3 #6299 (Relay
Good band conditions today - calls from all corners of the country. Jonathan,
G0DVJ, came in strong from England. - - Brian, K1NW
K1NW Brian Elecraft K4D #863 (net control)
N8SBE Dave MI Elecraft K3S #11361
N4NRW Roger SC Elecraft K3 #1318 (relay)
K8NU Carl OH Yaesu FTDX101D
W4DML Doug TN
50) watts and hold the TUNE button. I can imagine that
accidentally doing so into an antenna rather than a 50 Ohm dummy load could
really mess up the TX GAIN calibration.
Thoughts?
73, Brian, K0DTJ
> On Jan 24, 2023, at 09:20, Lee Hiers wrote:
>
> How would one search the archives
You are correct -
"Don't forget our 80 meter net at 9PM Eastern on 3784. Note the new
frequency.
“
Brian
> On Jan 1, 2023, at 11:19 AM, Karl W Hubbard wrote:
>
> Is 80 m going to be on 3.775 or has it moved to 3.784?
>
>
> Sent from Yahoo Mail for iPhone <
, in Michigan at 9 pm EST
(note not UTC) on 3.775.
I hope you can join us today!
Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
to relays: John
N6JW, Phil NS7P, Steve WM6P, and Carl K8NU. Join us every Sunday on 14.3035 MHz
at 1800Z. - - Brian K1NW
K1NW Brian Elecraft K4D #863 (net control)
KK5LD Dan TX Elecraft K2 #223
W4DML Doug TN Elecraft K3 #6433
N6JW John CA Elecraft K3 #936 (relay)
W5SV Dave TX Elecraft K4D
found that, properly adjusted, it works very well on CW but using it on
SSB created unacceptable “mush” on the audio.
Hopefully the spectral subtraction NR when available on the K4 will be much
better.
73,
Brian, K0DTJ
> On Nov 6, 2022, at 17:34, Richard wrote:
>
> Is there A
Like you I’m 99% CW OP but for years I’ve used inexpensive (~$20) computer
headsets with my K3. Light weight and don’t clamp your head. Comfortable to
wear for hours. They’re a bit hard to find these days because most are
Bluetooth. The K3 TXEQ can make it sound good.
73,
Brian, K0DTJ
>
.
Brian, K1NW
Call Name State MANUF MODEL S/N
K1NW Brian RI ELECRAFT K4D #863 (guest NC)
K8NU Carl OHYAESU FTDX101D
W4DML Doug TNELECRAFT K3 #6433
N8SBE Dave MI ELECRAFT K3S #11361 (relay)
KK5LD
(edited message follows)
> On Oct 25, 2022, at 13:05, Brian Hunt wrote:
>
> I believe the schematics, which are downloadable, will show the component
> values. They are typically a binary progression. I’ve never tabulated them
> though.
>
> Brian, K0DTJ
>
>
I believe the schematics, which are downloadable, will show the component
values. I’ve never tabulated them though.
Brian, K0DTJ
> On Oct 25, 2022, at 10:16, Walter Underwood wrote:
>
> The KX3 has extra range so that it covers 160 m and 6 m compared to the KX2,
> which is 80
I might add that the computer is an old Win7 desktop running Win10. Definitely
not a powerhouse. :-)
73,
Brian, K0DTJ
> On Oct 14, 2022, at 14:40, Brian Hunt wrote:
>
> I have been using a USB-to-serial converter cable for connection between the
> K3 and computer running N1MM
computer to falter a bit once in a while
depending on what else the computer is doing at the time. I try to minimize the
number of apps running. Typical CW speed is 22-32 wpm so I don’t know how it
would do faster than that.
73,
Brian, K0DTJ
> On Oct 14, 2022, at 07:23, dave arruzza via Elecr
).
I’ve been using the SMTR ABS mode ever since I discovered it. YMMV
73,
Brian, K0DTJ
> On Oct 10, 2022, at 14:05, D Remy wrote:
>
> Does that also apply to the K3?
>
> David R Hourdequin, PE
> 828-421-6216
>
>> On Oct 10, 2022, at 14:20, Don Wilhelm wrote:
>
FP Temp warms a
little - I wrote the number down somewhere but can’t find it now.
Good luck & 73,
Brian, K0DTJ
> On Oct 10, 2022, at 09:49, Michael Carter wrote:
>
> Hi Eric,
>
> I'm voting with my friend Dave, K1WHS,
> for looking first at the voltage regulators
Check the “Shipping Status” link on the Elecraft home page. It shows the
shipping status on virtually all their products. It’s updated when there are
changes. KPA-1500 is shown as in stock, no doubt updated in the last few days.
73,
Brian, K0DTJ
Elecraft SSB 20M Net – 10/02/2022
Call NameState MANUF MODEL
S/N
K1NW Brian RI ELECRAFT K4D
863
N6JW John CA ELECRAFT K3
from them. :-) SWR at 14.050 MHz resonance was
calculated at 3:1.
Interesting exercise!
72,
Brian, K0DTJ
On 9/26/2022 12:15, David Gilbert wrote:
I modeled something similar to an AX1 with EZNEC last night. I used a
base loaded 4' length of 1/2 inch diameter tubing for the whip, a
ro
We had a good net under iffy conditions - lots of fading. Thanks to all the
stations that checked in - hope to hear you again next week! Brian, K1NW
K1ND Jan MI K4 #202
K1NW (NC) Brian RI K4D #863
KE2EF Ed FL FTDX101MP
K8NU Carl OH
TN QSO party
dominated and I heard nothing from you. I hope to continue checking in! Thanks
for running the net.
Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
n the PTT line becomes
> inactive. I don’t know what the 7300 does in this case - hopefully others
> on the list have this information and can tell us.
>
--
Brian D
G3VGZ G8AOE G3T
IO94im
__
Elecraft mailing list
Home: http:/
7.280 MHz with Steve, WM6P Net Control. The CW
nets are at 2300Z on 14.050 MHz and 0030Z (Monday) on 7.047 MHz.
Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Elecraft 20 Meter SSB Net, 7/24/2022
No. Callsign Name State Rig S/N
1 K1NW (net control) Brian RI K4D #863
2 W9EJB Ed IN K4D #498
3 K8NU Carl OH FTDX101D
4 KT5LD Dan TX K3 #986
5 WM6P
connections
right.
73,
Brian, K0DTJ
> On Jul 23, 2022, at 17:29, Andrew (A.J.) Stockton via Elecraft
> wrote:
>
> You can check out a few on Amazon - common one headset between computer for
> web calls and second for gaming systems
>
> Nobsound Little Bear MC1023 2
Kevin,
For option 3 you might take a look at the groups.io linuxhams. A quick search
there unearthed xlog. Don’t know anything about it but the write up says
general and contest logging.
Dual booting the computer you want to use for contesting could be option 4. 😀
73,
Brian, K0DTJ
> On
at arrl.net. I will be taking over from Bob when the 2021 Group
3 is fulfilled, and will keep the list going through at least the end of the
year - production should be caught up by then, right?
--
Brian Maynard, K1NW
Wakefield, RI, USA
The table is sorted on “Narrow Spaced Dynamic Range” which is only one measure
of “best”. To get a better understanding of the overall picture, read
through/view some of Rob’s presentations on his website. Very enlightening.
73,
Brian, K0DTJ
> On Apr 28, 2022, at 18:44, Gary Gregory wr
Solar Edge but haven’t
confirmed it. QTH is Northern California.
73,
Brian, K0DTJ
> On Apr 18, 2022, at 07:30, Ron Bell via Elecraft
> wrote:
>
> Does anyone know the source of interference in 17M, starts at 18.138, peaks
> 18.147 and second peak at 18.158, sounds like ver
KX3, K3S, and P3 all sold. Still have KXPA100
73 Brian KF6C.
From: br...@kf6c.com
Sent: Tuesday, April 5, 2022 10:10 AM
To: 'Elecraft@mailman.qth.net'
Subject: For sale: KX3,KXPA100,K3s,P3
KX3 sn 10573, has antenna tuner, 2-meter converter, internal NiMH
Charger/Real-
I found a pair of amplified speakers at a thrift shop that meet the need pretty
well. Can’t beat the $6. :-)
73,
Brian, K0DTJ
> On Apr 14, 2022, at 16:52, Andrew Moore wrote:
>
> KX2 arrived yesterday after a ~15 week wait, which was pretty much spot on
> with Elecraft's
ctures.
73 Brian KF6C.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Pleas
Net Control K1NW Brian K3 #4974
N8SBE Dave MI K3S #11361
K8NU Carl OH KX3 #311
Relay WM6P Steve GA K4 #436
W9EJB Ed IN K4D #498
K1ND Jan MI K4 #202
K6FW Frank CA K3S #11672
Relay N4NRW Roger SC Yaesu FTDX5000
K7BRR Bill AZ K3 #2693
Relay NS7P Phil OR K3 #1826
K6VWE Stan MI K4D #193
The 6400 is $2000.
Brian
KB1VBF
Sent from my iPad
> On Mar 5, 2022, at 10:52 AM, Pete Smith N4ZR wrote:
>
> Interesting question. The Flex 6700 is close to the top of the list with
> some sort of updated hardware, while the 6400 is below the original K3, and
> far below
the top line says DON’T
DO IT. If you do, you must have a configuration file to reload all the
calibration data and defaults.
Good luck!
Brian, K0DTJ
> On Mar 2, 2022, at 17:28, jimith...@gmail.com wrote:
>
> I messed up settings trying to learn the menus . How do I get ba
Did you inadvertently turn up the MON level?
73, Brian, K0DTJ
> On Feb 27, 2022, at 03:31, Bob KD7YZ wrote:
>
> Hello K3 List
>
> K3 upgraded to K3s. MON = 0 .
>
> When I push the PTT on the Icom SM-50 base mic, there is noticeable
> feedback coming from the
You can see an estimate of orders, delivery times and serial numbers at this IO
site:
https://groups.io/g/CreativeK4ShippingStatus
<https://groups.io/g/CreativeK4ShippingStatus>
Brian, K1NW
__
Elecraft mailing list
Home
From page 15 of the K3 Manual:
"If cross-mode operation is not allowed for the present VFO A and B modes,
you’ll see SPL N/A if you try to enable SPLIT.”
Regards, Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qt
-- Forwarded message -
From: Brian F. Wruble
Date: Wed, Dec 22, 2021 at 4:20 PM
Subject: Need a logger recommendation
To: DX List , DX Reflector
I have been using CommCAT (by Howard, W6HN) for at least 15 years. I have
been a beta tester. It has one feature that really set
A starting place is Don, W3FPR’s webpage: W3FPR.com. At the bottom of the
sidebar is a write up on how to set up Elecraft radios for digital modes.
Expert guidance.
73,
Brian, K0DTJ
> On Nov 27, 2021, at 08:43, Nolte Dennis wrote:
>
> I would help in setting up my K3S for FT-8
download one from Elecraft.
Good luck and have fun with this little beauty.
73,
Brian, K0DTJ
> On Nov 26, 2021, at 12:18, Mike Smith VE9AA wrote:
>
> Just bought a K1..an oldie but a goodie, I guess.
>
> NB board and 2 bands board (20/40) No tuner.
>
>
>
> So, j
s. Also
a Christmas wish would be to purchase a K60XV if anyone has one laying
around that they'd be willing to sell.
Thanks, 73,
Brian - KM6ZX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hel
It’s a self protection feature to keep you from blowing up the audio input. The
KX2 has it as well. Causes me to scratch my head until I remember.
73,
Brian, K0DTJ
> On Nov 23, 2021, at 17:36, Julia Tuttle wrote:
>
> Does anyone know *why* it does that? It's confusing when
I use a large ferrite clamp-on to isolate my short whip/counterpoise from my
KX2. Needed tor running digital modes. The large variety will hold 3 turns of
RG-58 which seems to be enough for what I need. IIRC I got them from ProAudio
Engineering. GL
73,
Brian, K0DTJ
> On Nov 20, 2021, at 10
You need to gently slide the large rubber band off the VFO A knob to
access the single allen screw. The band can slide back on the knob
with some slight stretching.
Brian Broggie
W6FVI
Brian Broggie
K4 Program Manager at Elecraft, Inc.
Address Watsonville, CA
Phone (831) 763-4211
Mobile (831
They are for the knobs (VFO A, VFO B, RIT, and Volume)
Brian Broggie
W6FVI
Brian Broggie
K4 Program Manager at Elecraft, Inc.
Address Watsonville, CA
Phone (831) 763-4211
Mobile (831) 601-6983
Email br...@elecraft.com
Website www.elecraft.com
On Tue, Nov 16, 2021 at 1:31 PM Fredric Serota
get started.
Can anyone direct me to a good source(s) of information on this?
73,
/Brian K8GRR/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@m
I just wind a figure-8 between my thumb and little finger and tie the bundle
with a twist tie. Spade lug on one end and small weight on the other. 25 ft is
about the longest this works for.
72,
Brian, K0DTJ
__
Elecraft mailing list
For Sale: K2 QRP Cover in excellent shape. $30.00 obo + shipping by buyer's
choice. Contact me for pictures, etc.
Brian N9ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
slightly to
see if that frees them up. The pivots should be set so the paddles move freely
but with no up/down looseness. Then set the spacing to taste. GL!
72,
Brian, K0DTJ
> On Sep 14, 2021, at 15:34, Chris wrote:
>
> Hello,
>
> My KXPD2 paddle has some issues. It moves very
There are lots of additional K3 related macros there as well.
73,
Brian NZ4N
On Mon, Aug 30, 2021 at 2:23 PM Bruce Wade wrote:
> Cannot figure out how to control pwr out with a slider.
> Help
> Bruce Wade
> __
> Elecraft
breeze - no problem 😉
It’s a great little rig. Have fun!
73,
Brian, K0DTJ
> On Aug 21, 2021, at 09:12, Bill Lederer wrote:
>
> Team:
>
> I discovered that the KX2 will trip out if its temperature gets too high.
> Clearly, this is a good thing. I am considering getting the he
darn quiet (especially at 9 vdc) they are
useful to have at hand for any situation where heat might need to be dealt with.
Brian VE3HI VE3VAW Toronto ON
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
. If I can resist
the pull of a K4!
Brian, K1NW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Please try again.
Our lightning fast web wizard has fixed it.
Brian Broggie
K4 Program Manager at Elecraft, Inc.
Address Watsonville, CA
Phone (831) 763-4211 <(831) 763-4211>
Mobile (831) 601-6983 <(831) 601-6983>
Email br...@elecraft.com
Website www.elecraf
The easiest way is to use the K3 Frequency Memory Editor to enter favorite
stations into memory. The program is available for download from Elecraft.com.
It works for KX3 and KX2 also.
73, Brian, K0DTJ
> On May 23, 2021, at 16:40, Larry Boekeloo wrote:
>
> Curious as to how othe
tch points. The area between
7.41 MHz and 8.4 MHz is kind of no-man's land due to the first IF being
there. At the IF frequency the gain was down >50 dB.
73,
Brian, K0DTJ
On 4/20/2021 08:57, w4sc wrote:
A little back ground,,
The effort started as a result of my using WWV at
That mic has a built in preamp, even though it is a dynamic mic. You might
consider that and lower your mic gain setting in the K3.
Brian Denley
KB1VBF
Sent from my iPad
> On Apr 2, 2021, at 2:39 PM, Steve Fox wrote:
>
> Do I need to make any modifications to use an MC-60A micropho
but add value to the K3.
Have you thought about asking Elecraft for the work orders for the K3’s S/N?
Good luck and thank you for helping out the family. Sorry you lost a friend.
73,
Brian, K0DTJ
__
Elecraft mailing list
Home: http
e notches develop at certain frequencies, it's
> > often the result of noise exposure at work.
> >
--
Brian D
G3VGZ YarmEngland
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
.
73,
Brian, K0DTJ
> On Mar 7, 2021, at 14:51, kevinr wrote:
>
> It is time to prepare for migration season. I scan a few bird books to
> memorize identifying marks. Birds normally appear in low contrast locations,
> looking little like they do in photos. Habitat and behavior
file so you
can restore it if needed. You will need a good dummy load an a stable power
source. The procedure is on p. 38 of the Rev A5 Manual.
Good luck,
73,
Brian, K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
The KX2 uses a control loop to set power. Make sure you have sufficient audio
drive to energize the loop. Using the ALC display set the MIC GAIN so you have
5-7 bars on voice peaks, per the manual.
What MIC are you using? Have you tried the internal MIC?
GL & 73,
Brian, K
thing for us mic
neophytes is the mic is always in the right spot for consistent modulation
levels, etc. YMMV
73, Brian, K0DTJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
-100. I would also like to
get the matching KAT100, but unfortunately the ATU is no longer available from
Elecraft. Does anyone have a KAT100 sitting around that they are no longer
using and would be willing to part with for the right price? My email can be
found on QRZ.
Thanks and 73,
Brian
re welded, and given the cost difference for welded air
> variables I doubt MFJ used them.
>
--
Brian D
G3VGZ YarmEngland
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.
If you have listened to the VARA signal, you know it consists of a series of
tone frequencies sent in sequence. That could very well be driving the KAT500
nuts in AUTO mode. Training and then MANUAL is the solution. GL!
73, Brian, K0DTJ
> On Nov 23, 2020, at 12:53, Lyn Norstad wr
al (IIRC).
tnx
Brian VE3VAW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please he
In Windows 10 settings make sure “Allow apps to use the microphone” is turned
ON. I think it’s in the security section.
73,
Brian, K0DTJ
> On Nov 15, 2020, at 00:41, carlos popelier wrote:
>
> hi,
> is it possible to use friture instead of spectrogram ,
> spectrogram seems
1 - 100 of 2101 matches
Mail list logo
