[Elecraft] HELP! XFINITY SHUT OFF INTERNET DUE TO HAM ANTENNAS

disconnecte drop lines etc... The towers stay, send that reigstered letter and CC ARRL…. 73 Dana Ve3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] KPA500 Clicking Noise

Ah, yes, I sure did. Sorry about that. Got it now.Dana On Mon, Sep 20, 2021 at 5:12 PM Bill Weaver wrote: > I believe you missed his sarcasm :) > > 73, > Bill WE5P > > Comfortably Numb > > > On Sep 20, 2021, at 20:03, Dana Roode K6NR wrote: > > > &g

Re: [Elecraft] KPA500 Clicking Noise

s out. Am I missing something? dana On Mon, Sep 20, 2021 at 3:42 PM Andy Durbin wrote: > "but after it warms up - 40 degrees C or so - I start to hear a faint > clicking noise." > > You should stop using it. There is clearly something seriously wrong. > All KPA500 sho

[Elecraft] KPA500 Clicking Noise

o, I think whether I am transmitting or not. Fan control is working fine, and I bumped up the lowest speed to help keep the amp cooler. Let me know if anyone has seen this before. Meanwhile, I will keep using it and see how it goes.

[Elecraft] Koss SB/45 vs Yamaha CM500

My CM500 died on me, looks like the electret element … I replaced the set with a Koss SB/45 which was cheaper and quite comfortable and plugs into the K3 as well (K4 too). The price of the CM500 had doubled up here in Canada for some reason, so the Koss looked more attractive. 73 Dana VE3DS

[Elecraft] K3 and DEMI/Q5 Transverters.

to be able to know where you are … Having said that, Q5 have a really slick multi band transverter that would integrate really well on the K3 or K4… but at a price point. Anyway I do hope Elecraft come up with something that is crunch proof and rock solid for 144 222 432 MHz. 73 Dana VE3DS

[Elecraft] K3 on 6m

I use my K3 daily on 6 m but you need one of the preamps or a good GAsFEt preamp with it…for DX activities. Its fine without for local stuff… especially in urban areas.. 73 Dana VE3DS __ Elecraft mailing list Home: http

Re: [Elecraft] K3 Chirp - K3SYN Board

It shouldn't really be a surprise, but a number of folks have extra KSYN3 boards after they upgraded to KSYN3A. I am sorting through the email offers, but looks like I will have no trouble finding one. Dana On Sat, May 1, 2021 at 12:39 PM Dana Roode K6NR wrote: > The cause of my

Re: [Elecraft] K3 Chirp - K3SYN Board

it, nor does it have the 2010 mod. Meanwhile, I'm in the market for a K3SYN board. Don't know if elecraft has them as spare parts or can repair the one I have. Will have to ask. Dana On Fri, Apr 30, 2021 at 10:44 AM Dana Roode K6NR wrote: > Let me give this another try. A

Re: [Elecraft] K3 Chirp

nly other thing I can think of is an issue with the KSYN3 board. I can try the calibration Wayne mentioned in his 2017 post. Dana On Wed, Apr 28, 2021 at 5:21 PM Dana Roode K6NR wrote: > It was reported today by several folks who heard my CW signal that I have > a bad chirp - I was o

[Elecraft] K3 Chirp

I had not heard of that before, I will look into it. If anyone has experienced a problem with chirp on a K3, let me know (it is a K3 not a K3S). Dana In reply to this post <http://elecraft.365791.n2.nabble.com/K3-past-chirp-report-tp7625892p7625898.html> by Doug Smith [W7KF] U

[Elecraft] KIO3 Rev C not B

My apologies, the dead board is a Rev C . Date on the board is 10 13. 73 Dana VE3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] Fire Sign Theatre

Can’t wait to “bite the tires” of the K4… DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qs

[Elecraft] KIO3B board ?

, as I try to diagnose the other “intermittent" issues… Thanks 73 Dana VE3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qt

[Elecraft] K3 tx rx switching

wise idea… 73 Dana VE3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

Re: [Elecraft] Sudden KpA1500 power reduction

my skill level. Dana On Sun, Feb 21, 2021 at 9:32 AM Frank Scolaro wrote: > > Happened to me several months ago... one LDMOS out! same symptoms. You > need the power with such great band conditions... > > GL > Frank, W2YK > > > > > -Original Message- &

[Elecraft] Sudden KpA1500 power reduction

t Elecraft support unless there is something I'm missing here. I just looked in the archive and see that this has happened to others I use the amp remotely so I guess I'll have to take it home with me. Dana __ Elecraft mai

Re: [Elecraft] KX1 Receive Audio

Thanks Bill; the KX1 has the antenna tuner and 30m. The 30m option is soldered in, but I did reseat the tuner just now and that may have well fixed it. I appreciate the suggestion! Dana On Thu, Feb 18, 2021 at 9:26 AM Bill Johnson wrote: > Dana, you might want to re-seat the tuner and

[Elecraft] KX1 Receive Audio

f some sort? I hear the artifacts even without an antenna. It comes across as clicking, almost always very quiet - you can hear it best if you turn down the RF gain. At any rate, the radio is quite usable but I thought I'd see if anyone else has

[Elecraft] S2-3 on K3 With No Antenna?

Any thoughts on what it means to have a s2-3 noise when I switch in the preamp on my K3 with no antenna connected? Dana __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] K3 CW Chirp

ly is good. I have not been able to recreate yet listening to a remote receiver. Any initial thoughts appreciated. Dana __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfa

Re: [Elecraft] K3 Transmit Timeout for Remote Operation

I didn't get any response to my query below, but I have a solution in place finally. I'm no electronics wiz but I found some circuits and constructed something based on a 555 that works nicely. If any else is interested in this, let me know.Dana On Fri, Aug 7, 2020 at 2:01 PM

Re: [Elecraft] CW Sidetone and Line Out?

Wow thanks Bob. I thought I was going nuts and wasn't sure where the sidetone was coming from. Seems odd that the normal mon control doesn't affect this but I'm sure Elecraft had it's reasons. Thanks again, Dana On Thu, Aug 20, 2020, 4:35 PM Bob Wilson, N6TV wrote:

[Elecraft] CW Sidetone and Line Out?

ve even experimented with the "LINOUT" configuration; setting it to 0 removes my receive audio but not the sidetone. It seems sidetone is coming from LINOUT and I've not found a way to reduce its amplitude. Or I am not thinking about this

[Elecraft] K3 Transmit Timeout for Remote Operation

he Remote Radio interfaces have this built in, but I'm not using them. Dana __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.n

[Elecraft] KI03 Damaged

the USB IO set up, or any suggestions as to what else may be damaged , like U1 ? Thanks in advance 73 Dana VE3DS Toronto __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] Fwd: TRansverters & K3

Dana VE3DS FN03 Toronto __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] K3 RS 232 Data

before?? I’m wondering if its something hard coded in his program. I’ve queried him but no response as yet. 73 Dana VE3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

[Elecraft] Ft-8

es of communication and my KX3 is great at all of it. Dana KM4TIX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list h

[Elecraft] Fwd: VHF+UHF Radio Wish List

Dana VE3DS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this

[Elecraft] Fwd: VHF+UHF Radio Wish List

sy but its rack mounted, would look better in a Elecraft style cabinet! jo If I took out the 100 w module there would be room to fill the box with transverters….but a K3SVU would be nice eh? 73 Dana VE3DS FN03 __ Elecraft mailing list

[Elecraft] Fwd: SSB Monitoring

signal just offset from our transmit frequency… same thing on CW .. haha … it was US causing the “QRM”….. I have a K3 and its the best radio I’ve owned, and the customer service is out of this world! Just missing the “big dish”…. 73 Dana VE3DS

Re: [Elecraft] Elecraft Digest, Vol 153, Issue 16

On Jan 11, 2017, at 20:43, elecraft-requ...@mailman.qth.net wrote: Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subj

Re: [Elecraft] KX3 SWR indicator

The firmware is up to date (MCU 2.34, DSP 1.33). I have done a TX gain calibration and the SWR indicator is still reading as before. Dana Browne, AD5VC On 12/27/2015 7:15 PM, Walter Underwood wrote: What version of firmware are you running? I’d update the firmware and run a TX gain

[Elecraft] KX3 SWR indicator

seeing something posted on the reflector about it being pretty reliable. -- Dana Browne, AD5VC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] SWR indicator

removing the antenna tuner and repeating the test? Thanks in advance. -- Dana Browne, AD5VC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] [K2-KPA100] Hi Refl

erent coax jumpers with no effect. Is there a setting for the SWR sensor that I am missing? Is there a component or connection that I should check? Thanks in advance Dana N6DW __ Elecraft mailing list Home: http://mailman.qth.net/mailma

Re: [Elecraft] KX3 PBT on SSB

not heard of the other demodulation scheme before. I guess I have some more reading to do. I will try the Data A mode. Thanks for the feedback, folks. Dana Browne AD5VC --- On Tue, 3/5/13, John Oppenheimer wrote: > From: John Oppenheimer > Subject: Re: [Elecraft] KX3 PBT on SS

[Elecraft] KX3 PBT on SSB

such dead zone appears if I raise the lower cutoff. I am using MCU 1.36 and DSP 1.05. Has anyone else observed this? Dana Browne AD5VC --- On Sun, 3/3/13, Wayne Burdick wrote: > From: Wayne Burdick > Subject: Re: [Elecraft] KX3 firmware rev 1.38: Programmable switch macros > To:

Re: [Elecraft] KPA500 Remote

nes I remember. So, I will build a cable and bring out the various pins I may use on either side of the connection. dana On Sun, Jul 24, 2011 at 1:25 PM, Dick Dievendorff wrote: > The KPA500 XCVR connector is used primarily to support Kenwood rigs that > communicate their frequency via a

Re: [Elecraft] KPA500 Remote

plug, which seems to be the other way to go. Dana On Sun, Jul 24, 2011 at 12:37 PM, Dick Dievendorff wrote: > Dana: > > There isn't an option to connect the KPA500 to the K3 via RS-232.  There's > an option to connect the KPA500 to the K3 via its 15-pin ACC connector.  I

[Elecraft] KPA500 Remote

hat I currently use, the toggle ON/OFF pin for the KPA500, etc. So, what are others doing? I see there are options to connect the KPA to the K3 via RS232 not sure what that would buy me. Dana, K6NR __ Elecraft mailing list Home:

Re: [Elecraft] KPA500 Serial 0194 Done!

ribbon cable. dana On Sun, Jul 24, 2011 at 10:40 AM, Bruce W1UJR wrote: > Just finished up serial # 1094, nice kit, takes about 5 hours or so if you're > enjoying the process. > On the air flawlessly this afternoon, photos up at > http://www.w1ujr.net/elecraft_builds.htm >

Re: [Elecraft] Flying with K2

Ron, thanks much for the explanation! Sounds like a pretty safe battery to me. Dana - K6NR On Mon, Jul 4, 2011 at 9:06 AM, Ron D'Eau Claire wrote: > Elecraft sells a Sealed Lead Acid (SLA) Gel Cell battery for the K2. > Unfortunately, many people, even some battery vendors, are ca

Re: [Elecraft] Flying with K2

Folks, I've read this thread with concerns about the SLA battery in the K2. However, the Elecraft web site says the K2 batter is a Gel-Cell, not Sealed Liquid Acid. Does this make a difference? Were some K2 batteries SLA and some Gel-cell? Dana On Sat, Jun 25, 2011 at 10:21 AM,

[Elecraft] KPA500 Remote

via the RS232 port. dana, k6nr __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

Re: [Elecraft] K3 Micro Manual iPhone App

Mike, Nice job. This might be the best 99 cents I've spent for a IPhone app. 73 Dana, W8dh __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] Elecraft ad gear

h a secret 'Elecraft handshake' so we can spot the posers at hamfests. 73 de Dana W8DH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailma

[Elecraft] Elecraft shipping Part2

I'm a field service engineer in the medical imaging field, and am on the road sometimes for a week at a time. When I recently received m K3, I was home and had to sign for it. However, when my P3 arrived, I was on the road, and it sat at my front door for 5 days. No harm, no fowl. I spoke to Ol

[Elecraft] RF Speech Processing

Just wondering how those several per month users liked it. I have the 715 leftover from my ProIII days, when I upgraded to the K3, and thought the 715 was a big improvement. 73 de Dana W8DH __ Elecraft mailing list Home: http://mailman.qt

Re: [Elecraft] K3: QRQ high-speed QSK

gs on the website. Joe, KH6/W3GW has a QRQ article in the most recent CQ magazine (Sept. 2010). An expanded version is also posted on the club site. 73 de Dana W8DH QRQ-CW __ Elecraft mailing list Home: http://mailman.qth.net/mailm

[Elecraft] Here it comes-K3-F/100

Ordered this on Wed. Sept 1st, and got confirmation it had shipped today Tue. Sept. 7th. And that's with Labor Day thrown in. Also received an email from Olivia saying that my P3-F will ship in 7-10 days. __ Elecraft mailing list Home:

[Elecraft] Filters for weak signal 160 meter CW and crowded contest bands

e 250 8 pole or the 200 5 pole. Any thoughts? I have not seen any data on the 200 hz filter, but the 250 seems more like a 370 hz filter if you look at the filter plot. Which do I want? Dana, K6NR ___ Elecraft mailing list Post to: Elecraft@mail

Re: [Elecraft] KRC2 - More than one antenna per band? Aux outputs?

it up. Dana On Tue, Jan 13, 2009 at 2:20 PM, AD6XY wrote: > > Nice photos, I am green with Envy. > > This is what I was trying to imply by pretending there is a trasnverter so > you can have more than one setting per band, but as you appear to have one, > why not just use t

Re: [Elecraft] KRC2 - More than one antenna per band? Aux outputs?

for, but I wanted to double check. Dana, K6NR On Thu, Jan 8, 2009 at 7:38 PM, Jack Brindle wrote: > The KRC2 in its standard configuration can easily select multiple antennas. > When a new band is indicated by the radio, the KRC2 will select that band. > The user can then select other

[Elecraft] K3 NB causes more noise on 160?

. Anyone else notice this? The noise is not at all like what you get when you turn blankers on on other radios and there are strong signals present, it just sounds like man-made noise. Dana, K6NR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You

[Elecraft] KRC2 - More than one antenna per band? Aux outputs?

Aux outputs on the KRC2, how does one control those remotely (that is, via the serial interface or some other means)? I have to select directions on my 4 square, and switch in and out a series capacitor on my 80 meter vertical for SSB. Dana, K6NR

[Elecraft] K3 question: setting monitor level via serial port command?

looked through the K3 Programmers Reference and didn't spot it there either. Dana, K6NR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] FOR SALE: KX-1, Scout, Globe Matcher Sr.

FOR SALE: Elecraft KX-1, KXB30 and manual. $325 Ten-Tec Scout 555 with noise blanker, Mic, 80m, 20m, 10M band modules and manual. $375 WRL Electronics Globe Matcher, Sr. Model AT-4 antenna matcher and manual. $125 Plus actual shipping. TNX es 73, D. A. "Mike" Michael W3TS

[Elecraft] FW: FOR SALE: KX-1, Scout, Z-100

> FOR SALE: > > Elecraft KX-1, KXB30 and manual. $325 > > Ten-Tec Scout 555 with noise blanker, Mic, 80m, 20m, 10M band modules > and manual. $375 > > LDG Z-100 160-6M 125watt automatic antenna tuner and manual. $100 > > Plus actual shipping. > > TNX es 73, > D. A. "Mike" M