On 12/31/2016 7:04 PM, John McBee wrote:
I have just purchased an Ten Tec Titan 425 amplifier and was wondering
the best way to hook it to my K3? I would like to be able to use QSK
with the amp too. Just don't want to mess anything up, so thought I
would ask here first.
Thanks in advanced
I have just purchased an Ten Tec Titan 425 amplifier and was wondering
the best way to hook it to my K3? I would like to be able to use QSK
with the amp too. Just don't want to mess anything up, so thought I
would ask here first.
Thanks in advanced for any suggestions..
73'
John
KM5PS
I have been having trouble in the wpx rtty test, my k3 has been having
issues with mmtty keying the rig. I have the in/out lines on k3 going
to in/out on sound card as they should, and the ptt-key set to drt-rts.
The problem is, part of the time the mic setting is set to abt 3-4 with
5 bars
Just wondering what might be wrong with a friend's K3. It will only put
out 85 watts on 160 meters. All other bands put out 100 watts. I have
done the calibration with the K3 Utility program, but no change. Just
curious to what might be wrong, or what I could check from him. Thanks
for the
On 2/10/2015 9:27 PM, John McBee wrote:
I was getting this error from the kxr3 menu when changing from ATU
port to BNC port I have gotten this error a few times since I have
installed the kxr3. But all usually works. The book said to try to
reload the dsp 1 firmware and dsp2 firmware, so I
I was getting this error from the kxr3 menu when changing from ATU port
to BNC port I have gotten this error a few times since I have installed
the kxr3. But all usually works. The book said to try to reload the
dsp 1 firmware and dsp2 firmware, so I opened up the k3 utility and
tried to
On 2/10/2015 6:36 PM, Joel Black wrote:
Package is sold. Thanks for all the inquiries.
73,
Joel - W4JBB
On Feb 10, 2015, at 5:46 AM, Joel Black joel.b.bl...@gmail.com wrote:
Updated price is $1350 +shipping from my address at QRZ.com http://qrz.com/.
If the shipping + insurance is over $25,
*From:* John McBee jrmc...@cox.net
*To:* elecraft@mailman.qth.net
*Sent:* Thursday, February 5, 2015 5:59 PM
*Subject:* [Elecraft] s meter reading with sub receiver
Is there a way to see the S meter reading for the sub receiver? I've
been
Is there a way to see the S meter reading for the sub receiver? I've
been looking thru the manual and cann't find it. I thought I have read
somewhere about dual S meter's. Any help would be great or let me know
what page in manual it is on.
Thanks
John
On 1/5/2015 1:23 PM, Jim Brown wrote:
On Mon,1/5/2015 10:54 AM, David Cole wrote:
To expect the worldwide Amateur Radio community, to clear out space on
every band, for the few hundred JT users, on the off chance someone
might be transmitting, is simply insane and selfish.
I've made a lot of
On 12/24/2014 4:26 AM, Mike K2MK wrote:
Hi John,
Are you sure your external speaker is plugged in to the speaker jack and not
the rear headphone jack?
73,
Mike K2MK
John McBee-2 wrote
Problem still exist, however I have discovered that if I turn on spkr+ph
to on, I have audio fine without
On 12/23/2014 7:29 AM, W2BLC wrote:
I had that problem early on and figured it was a film of some kind on
the innards of the jack - had to wiggle the plug to get it to work.
So I used some of that high dollar contact cleaner on the plug
and then while it was still dripping wet, plugged
I have been having a problem for some time with the headphone jack on my
K3, no sound coming out of speaker on K3. It's starting to happen more
and more frequently. The problem is, some times when I turn on my K3, I
can't hear any audio coming out of the K3 speaker unless I plug in my
I am a new K3 owner and need some help with the k3 interface with N1MM. I
have got it work with a Winkey, but would also like for N1MM to keep track
of my band change and Freq. I have connected it to the computer via RS323
port to USB, but keep getting a error after a few minutes connected this
14 matches
Mail list logo