Hi All.
Anyone have a K3 usb and Raspberry Pi 4 working on WSJT-X! for FT4 mode.
I have a K3 converted to USB
Would be interested in setup etc!
Please share or email me direct if the bandwidth is t wide!
Oh, congrats Space-X !!
Regards
Ken.. G0ORH
Sent from my iPad
_
Hi guys
While I'm waiting for Elecraft support to come forward with a suggestion, I
thought I'd share my KPA500 (sn 0212) Amp's fault to see if it rings any new
year bells with anyone...hi
Just be4 Xmas I started getting an occasional fault whereby the Standby switch
would lock up, then after a
Hi guys
On the new K4, is there a built in facility to protract the waterfall onto a
large PC screen!
Cheers
Ken.. G0ORH
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://m
Hi guys
I'm experiencing an issue with my upgraded K3.
I've just fitted the Elecraft USB option thus replacing my Microham keyer.
Running Digital modes on DATA A, I cannot get the 4 bar and 5 bar flashing!
I'm running w10 pro (1903) on a fast i7 Intel Nuc pc.
I'm hooked up to the correct audio code
I've been deleting these postings on the K4 as I thought the K4 thread was
closed.
So the wind-up is real, there is a K4.
Ken.. G0ORH
Sent from my iPad
> On 16 May 2019, at 20:56, Wayne Burdick wrote:
>
> We forgive you, Andy. In any case, the real page will be a dramatic
> improvement.
>
Hi guys
I'm just trying to pair my KPA500 / kat500 to a flex 6500 to test it for
contesting this weekend.
Connected the flex to the KPA500 but I'm only getting 300w out and that's with
35w drive!
I've popped this question on the flex owners site they suggested I had a blown
pa.
Connected the K3
Course, Governments/Military have overall control over civilian use of the
Birds! or certainly use to have, whether that’s still the case I’m unsure!
Ken.. G0ORH
Sent from my iPad
> On 24 Jan 2018, at 17:21, Fred Jensen wrote:
>
> The elevation changes seen with civilian GPS are the resul
Interesting.
I have a 5 servo 8ft Helicopter, been flying them for years, but I've always
used an old 12ft fishing beach caster with 30lb line and 5oz fishing weight..
I can zip it over a 100ft tree, tie on a light line, reel the fishing line back
in then you can haul up the dipole end.
Takes a f
DXE ARAV3-1P - DXE RG 5000HD.
I've ordered a DXE ARAVS-1P Receive antenna, and DXE RG 5000HD front end
protector from USA,
I'm building a CW skimmer project in a small ...ish back yard with close by
transmitting antennas etc, my investment should ! Fit the bill nicely.I
hope.
Ken.. G0ORH
FAB
Ken.. G0ORH
Sent from my iPad
> On 12 Aug 2017, at 20:12, Wayne Burdick wrote:
>
> Hi all,
>
> You may have heard that the popular N1MM program now has a “contester’s
> spectral display” window. Very soon, we anticipate a new release of N1MM that
> provides support for this feature whe
Don't drop this thread Wayne! Theirs something we can all learn about here!!
Ken.. G0ORH
Sent from my iPad
> On 4 Aug 2017, at 05:52, Dave Cole wrote:
>
> Thanks to all for the sheer number and breadth of answers... Rather than
> answer each one, and create a huge number of posts, I will tr
FWIW
In UK, Honda 2k here, used for FD, iota, etc, etc, NO ISSUES WHATSOEVER.
Ken.. G0ORH
Sent from my iPad
> On 28 Jun 2017, at 17:42, Mike Maloney wrote:
>
> Curious if anyone used 2000W inverter type generator for portable FD
> operation? What brand machine and what experience with RF n
Agree
I've just broken off 9am for coffee here nr London.
My day started at 04:00 on 20m.
20m is awash with K6, K7's Condx are GREAT.
POINT YOUR BEAMS TO EU PSE!!!
Cheers
Ken M3i
Sent from my iPad
> On 27 May 2017, at 08:00, Wayne Burdick wrote:
>
> Hi all,
>
> In case you didn’t kno
Just wondering if it will be replaced with another model!!
Ken.. G0ORH
Sent from my iPad
> On 25 Mar 2017, at 17:26, Al Lorona wrote:
>
>
> You probably remember that I recently put out a little tutorial to the group
> on the K3 AGC. Immediately after I put those measurements out there, so
Contact G4HUP who makes various kits, I've one here.
See
http://G4hup.com.
The work is first class.
Ken.. G0ORH
Sent from my iPad
> On 13 Feb 2017, at 17:43, Ken G Kopp wrote:
>
> Who makes a Clifton Labs Z1000B replacement for the K2?
>
>> On Feb 13, 2017 07:46, "Don Wilhelm" wrote:
>>
>
Doug
I would like a MAB full kit board!
Cheers
Ken.. G0ORH ..K2 /100 sn 5877
Sent from my iPad
> On 5 Nov 2015, at 21:53, Robert G Strickland wrote:
>
> I'd like one.
>
> robert
>
>> On 11/4/2015 22:55, Doug Shields wrote:
>> Rueben,
>> I brokered the last bunch of MAB boards. A
Hi Ken
I like your idea too, would be fab having the K1EL chip in the Elecraft K3.
Ken.. G0ORH
Sent from my iPad
> On 23 Oct 2015, at 03:10, Ken Alexander wrote:
>
> Maybe Wayne and Eric should talk to K1EL about licensing (or whatever it is
> one has to do) so they can use his famous $8.00
I asked Wayne exactly that!
He say he would post it on the web site, once confirmed!
Ken.. G0ORH
Sent from my iPad
> On 22 Oct 2015, at 22:32, Gary wrote:
>
> That would be nice for those few Hams who do not live in the US and derive
> little from belong to the ARRL, who are respected every
Thanks Wayne, Appreciated.
Ken.. G0ORH
Sent from my iPad
> On 20 Oct 2015, at 15:35, Wayne Burdick wrote:
>
> Hi Ken,
>
> When they issue a revised Figure 10 for the article, we'll put it on our
> website.
>
> 73,
> Wayne
> N6KR
>
>
>
&
Hello Wayne
Would like to view both ARRL (old v new) synth plots side by side if possible!
Don't subscribe to ARRL, so not privy to that info!!
Ken.. G0ORH - M3i
Sent from my iPad
> On 20 Oct 2015, at 01:03, Wayne Burdick wrote:
>
> Hi all,
>
> You may have noticed that QST recently reviewe
Wes
What you have to realise is even DSP engineers have to have a Break!
Would you get a response back from one of the top rig manufacturers..No
We are a lucky bunch, the service we get is unprecedented!
Ken.. G0ORH
Sent from my iPad
> On 19 Sep 2015, at 04:08, Wes (N7WS) wrote:
>
> So far
Didn't realise it existed!
Will certainly be sorting the software today for my K2/100.
Regards
Ken.. G0ORH
Sent from my iPad
> On 9 Mar 2015, at 02:00, Brian Denley wrote:
>
> Nice programs for the K2! I hope he finishes the filter settings program.
> That looks very handy.
>
> Brian De
Wayne
The radio has recording playback ability.
Why not! Put a pre recorded fixed / user enabled, audible warning message when
out of SPLIT mode!
Ken.. G0ORH - M3i
Sent from my iPad
Begin forwarded message:
> From: Ken Chandler
> Date: 18 February 2015 09:02:40 GMT
> To: Wayn
I'm seeing differently too.
On HF running skimmer, softrock if mode, LP pan2, LP Bridge. EMU 202 card at
192.
Running thru NaP3, I can see the pileup etc, and it's accurate, no tweeking of
the offset done.
Bringing in CW skimmer I've had to retune offset to 5860, though I didn't do
this on the
I have West Mountain speakers, had them for 3 yrs now, no rf issues to date.
Ken.. G0ORH
Sent from my iPad
> On 29 Jan 2015, at 00:16, Bob Gibson via Elecraft
> wrote:
>
> What seems to be the best speaker for the k3? I'm using a A-COM and I am
> just not happy with the way it sounds.. I
All to common these days I'm afraid.
Ken.. G0ORH
Sent from my iPad
> On 27 Jan 2015, at 15:14, Andy wrote:
>
> Oh good. A scam to try and get money from us all.
>
> BEWARE.
>
> Andy, G8TQH
>
>
>
>
>
> From: "John Lawrence via Elecraft"
> Sent: 2
Hi
Just to update, and there are a few interested etc, I have now some new 6v250v
fst blow fuses.
The amp now switches on, data from the err log sent off to Elecraft engineer
yesterday.
But having connected k3 - kpa500 back together today, the amp turns on now ok,
but it has a permanent 270v ra
I was in the WAE rtty contest today when I heard a pop fizz, Red fault lamp on
the kpa500 was lit up and 60v err in the window.
I reset this fault, (switch off, and on) 2 hrs later I had another err fault,
this time 270v err, I again reset the amp, 2hrs passed and had another 60v err,
but this t
Charlie etal
I have seen that here though it tends to stay.
Sunday I had a weird thing happen, on the p3 scope, a tone would sound then a
herring bone effect would occur across the whole p3 screen, these herring
bones! We're spaced about every 1khz top and bottom.
This Tone, maybe a fishing net
I'll agree with that Ian, set it a 3KHz, then let the user define his own split
offset once split is activated.
Ken.. G0ORH
Sent from my iPad
> On 3 Oct 2014, at 09:11, Ian White wrote:
>
> The reason for programming a default "smart split" is to move the TX VFO
> *away* from the frequency
Gary
Order kits, and just pay VAT! Plus £11 handling charge
Ken.. G0ORH K Line
Sent from my iPad
> On 21 Sep 2014, at 15:36, Pierfrancesco Caci wrote:
>
>> On 21 September 2014 15:22:17 CEST, Gary McKelvie
>> wrote:
>>
>> Hi All recently I've inherited some money.
>> I'm considering
Kjeld et al
I think I'm right in saying, you cannot use this filter if your running AFSK
and 2tone !!
Ken.. G0ORH
Sent from my iPad
> On 9 Jun 2014, at 11:01, "Kjeld Holm" wrote:
>
> For the RTTY people,
> You may all know already but I did not - therefore this info.
> In ARRL National Conte
I use the exact same setup, K3, MH MKII keyer, sub RX set to main, headphones
connected to front panel, all ok here.
As someone stated, do make sure the sub is set to MAIN and NOT auxiliary.
Ken.. G0ORH
Sent from my iPad
> On 29 Apr 2014, at 13:22, K4ia via Elecraft wrote:
>
> I played with
That's strange, I updated mine this pm and I had all the required info!
Ken.. G0ORH
Sent from my iPad
> On 4 Feb 2014, at 15:30, Paul Kirley wrote:
>
> The 4.81 firmware release notes as downloaded from the FTP site show
> only the following for version 4.81:
> * XVTR IF BAND CAN NOW BE 10 OR
I have a very early KPA500, serial in low 200's.
I have a quiet outside shack and
I've heard the Clicks since day 1.
I've always thought these were part of the amps normal operating noise
environment.
If fact, I tend to notice more if I don't hear the clicks.
The description given - The passage o
SSB CONTESTERS
Anyone suggest a mid point!! setting For SSB TX EQ on a K3.
I will be using a Heil Pro set plus, Cans.
cheers
Ken..G0ORH
Sent from my iPhone 4s
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/
Well I am doing a Ham fest at the Newbury Radio Rally in June, I hope Lisa
sends me over a few hats and loada pins etc!
Ken..G0ORH - M3i
Sent from my iPhone 4
CW4EVER
On 15 May 2013, at 02:13, Gary Gregory wrote:
Scott,
I did a Ham Fest in VK3 this year and displayed the K-Line plus K
What about the brits were missing out alsohi
Ken..G0ORH - M3i
Sent from my iPhone 4
CW4EVER
On 15 May 2013, at 02:50, "Eric Swartz - WA6HHQ, Elecraft"
wrote:
Yup! Come early. :-)
Eric
elecraft.com
On 5/14/2013 3:19 PM, Scott Manthe wrote:
> I'd love an Elecraft hat, but missed o
Yes, but who else designs and builds Vertical Dipoles, not a lot I guess!
Ken..G0ORH
Sent from my iPhone 4
CW4EVER
On 11 Apr 2013, at 14:31, eric manning wrote:
ON a more positive note, Thomas DL2BO at Optibeam
bent over backwards to satisfy this customer,
who loves his Optibeam 16
Interesting this thread has come up, Ive also emailed them with the intension
of buying 2 Antenna's for iota this year.
Never got a reply.
Cannot understand these guys who have a good web site, products listed for
sale, email addresses etc, and get sod all for our inquiries.
Ken..G0ORH - M3i
S
Hi All
Regarding the KPA500 RF / LPF boards.
Are the inits matched paired, or can the LPF filter board be placed on another
RF pwr module board.
Thanks
Ken..G0ORH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listi
Interesting thread on the AFSK DSP width reduction.
Supposing all goes well, will we see a release of new firmware which will
include the new data!!!
Ken..G0ORH - M3i
Sent from my iPhone 4
CW4EVER
On 14 Feb 2013, at 00:06, "Mark n2qt" wrote:
I had missed that this wasn’t discussed on
You may want to take a look at the Chevron key, Its solid Bronze, hand built
here in the uk.
fotget the url but google search Chevron keys.
Ken..G0ORH - M3i
Sent from my iPhone 4
CW4EVER
On 5 Jan 2013, at 03:04, Rick Stealey wrote:
One thing you can do to help decide - try adjusting t
What your looking for perhaps is the stainless steel screw sets available,
these will probably withstand the harsh treatment you guys are handing out to
the screws.
Ken..G0ORH - M3i
Sent from my iPhone 4
CW4EVER
On 27 Dec 2012, at 19:13, Doug Faunt N6TQS +1-510-717-1197
wrote:
I fou
Eric et al
I understand that KAT500 Kits will start shipping next week after successful
field testing and
when the manual is printed.
When will the rest of the World and especially the UK start expecting shipments
to our zones!
Regards
Ken..G0ORH
Sent from my iPhone 4
___
Hello Jack
Lucky boy! I will have to wait until NA has been served first, no big deal, we
brits wait patiently in queue's, Good really, as any problems then you will
find it first!!!
Regards
Ken..G0ORH
Sent from my iPhone 4
On 27 Oct 2012, at 21:08, "W0UCE" wrote:
A litter of two K
I see Elecraft have taken on board what the general populous asked for and that
was for at least 3 outputs, should please a lot of op's this one!
Looks like another winning addition to the K - Line, for DX'peditions, FD's etc.
Ken..G0ORH / M3i
Sent from my iPhone
On 29 Mar 2012, at 01
Cannot believe that unless the factory and especially the girls on the LL's
have gone on strike, or theirs been a natural disaster.
Even at 4k miles away, I always get a reply within hours.
One reason i guess why we ALL choose Elecraft products, The service is
exemplary!
Ken..G0ORH/ M3i
Sen
just a thought, a highly polished stainless steel outer shell would be really
nice to!!
Ken..G0ORH / M3i
Sent from my iPhone
On 10 Dec 2011, at 01:33, "Eric Swartz - WA6HHQ, Elecraft"
wrote:
> Hi Mike,
>
> We're going to look seriously at the SS screws for all products.
>
> We'v
RTTY this weekend on 10m, use ARRL sweepstake template for WinTest users.
Ken..G0ORH
Sent from my iPhone
On 1 Dec 2011, at 20:15, "Joe K2UF" wrote:
> UPS says my new KPA500 is now in Illinois and due to be delivered on Monday.
>
>
> There is a CW contest this weekend.
>
> I am
It looks like what we suffer from in the uk on the ham frequencies, OTHR or
over the horizon radar.
In eu, It pops up whenever and believe it emanates Asia or Cyprus.
But in your case in CA not sure on its absolute range!!
Ken..G0ORH
Sent from my iPhone
On 10 Nov 2011, at 00:41, Mike
Don et al
Don't think it's mentioned on the forum, but does any of the logging software
like wintest etc, interconnect freely with naP3 beta!!
Ken..G0ORH
Sent from my iPhone
On 9 Nov 2011, at 23:51, Don Wilhelm wrote:
> Richard,
>
> I believe you are mixing two things (given the la
6 weeks ago I had a machine built to a high spec, I asked for Win XP Pro, but
got a call saying Microsoft don't supply a stand alone xp pro os software
anymore.
When I picked up my new PC the builder said MS supplied an official OS software
disc with XP Pro and with licensed Win7 software onbo
Hi
Interesting
Any chance of doing a video and posting it for all members to see.
Thanks
73's
Ken..G0ORH... Full K-Line + K2.
Sent from my iPhone
On 9 Oct 2011, at 18:55, Wayne Burdick wrote:
> Hi all,
>
> In case you haven't already been cluster-bombed with Pacificon
> announ
Info
Their is a new K3 micro manual update for the iPhone available.
Ken..G0ORH
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mai
s apparently they do sometimes for no clear reason. I'm at
> present locked in discussion with them about reclaiming it which I'm told
> takes time. Even if I never get it back though, it will all cost a lot less
> than shipping by UPS.
>
> 73 to all,
>
> Geoff
>
Guys
Always go via UPS.
My KPA 500 took just 4 days from CA to Thatcham, West Berkshire via UPS
Ken..G0ORH
Sent from my iPhone
On 18 Sep 2011, at 13:40, "Nigel \(Nidge\) Smith" wrote:
> Hi Stewart
>
> It's not that unusual, unfortunately. Last month I ordered the XG-3 from
> Elecr
Excuse me..
Ken..G0ORH
Sent from my iPhone
On 4 Aug 2011, at 09:46, David Pratt wrote:
> Correct - a 'Radio' is really a receiver. Perhaps he meant SO2T -
> 'Single Operator, Two Transceivers'
>
> The use of the word 'Radio' to mean 'Transceiver' migrated from the
> w
over RS-232 to power up/down the
> amp etc.
>
> 73, Eric WA6HHQ
>
> ---
> www.elecraft.com
>
>
> On 8/3/2011 1:09 AM, Ken Chandler wrote:
>> Hi
>> I took part in IOTA contest at the weekend in the unassisted category, CW,
>> high power.
>> Th
Hi
I took part in IOTA contest at the weekend in the unassisted category, CW, high
power.
The KPA-500 was used for the first full 24hrs contest here with M3i call-sign
and I did give it a darn good work-out end result performance was just fab.
No hang-ups, instant power, band change, big pile-ups
Hi
Just started using the QRQ for the first time with the KPA-500. WOW slick or
what!
Maybe a dumb question but I'll ask the panel anyway, I suppose it will run all
day and everyday at 35 - 40wpm during iota contest!!!
My other query is TR TIME in the KPA menu, should this be set to 0 zero for
FAB Lee
2 Bands RTTY, 3 bands CW including a 6m QSO with my 3el steppir.
May even shoot for another amp.
I will really know after the weekend how it really holds up during IOTA contest.
At the Mo it's so so so quiet you don't know it on.
Working during a contest is another matter and I wouldn't e
Excuse the bandwidth!
I intend giving my outfit K3/P3 and my new KPA-500 sn 212, affectionately know
as the K-Line, a full workout this weekend during IOTA contest.
It's hooked up with win-test, microham keyer 2,
Single op, all CW, all bands, Call is M3i.
Thanks
73's
Ken..G0ORH
Sent from my
Hi all
My KPA-500 sn 0212 got delivered on Monday afternoon by UPS, started Tuesday
morning on assembly all went well except some flat head screws were missing but
a quick email and Gary had the small screws enroute.
The Aux cable is a must have and the K3 and KPA500 talking to one another!!!
Ni
Friends
KPA500 ordered on 26/4/11.
KPA500 Kit (serial NK) was dispatched in CA, via UPS 14/7/11, arrived in UK
today 15/7/11
Out for delivery 18/7/11
Very quick service indeed.
Thanks Vickie!
Ken..G0ORH K2, K3, P3.
Sent from my iPhone
___
I sincerely hope it's desk top!!! And has multi antenna hook - up connectors,
at the very least 4, and possibly 2 input connectors
If the kat500 is the same size as the k3 etc, then I should think theirs plenty
of room in the box for additional antenna points.
Ken..G0ORH
Sent from my iPhone
I use a 12ft beach caster fishing rod, 40lb line, 6oz surf lead weight.
I can shoot a line up over a 60 / 80 / 100ft tree with ease.
Splice some 2/3mm rope on the weight end( after removing it) with the fishing
line, i use white tape, reel in.
Works every time.
Ken..G0ORH
Sent from my iPhone
Well I'd forgotten all about that!
Just posted my K2 on the page.
Thanks for reminding us!
Ken..G0ORH K2 K3 P3
Sent from my iPhone
On 15 Jun 2011, at 16:47, "David Ferrington, M0XDF"
wrote:
> does this help?
> http://www.zerobeat.net/cgi-bin/k2data/db.cgi
> 73 de M0XDF, K3 #174, P3
It is the IARU region 1 Field Day 4/5th June, the whole of EU will be QRV
for this one including my club x2 stations on all with K3's. We are G5XV/P
in RSGB open section 100w entry.
Ken..G0ORH
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.n
Could do with a posting on YouTube for this baby!!!
73's
Ken..G0ORH K2, K3, P3, KPA500.August
Sent from my iPhone
Member of:-
RSGB, NADARS, CDXC, FOC 1684, G-QRP 13178, IPA.
On 19 May 2011, at 04:47, Wayne Burdick wrote:
>> Will it run for a whole contest on 8 AA cells at ful
It's also a good idea to re-tighten to screws periodically but not to over
tighten them.
Ken..G0ORH
Sent from my iPhone
Member of:-
RSGB, NADARS, CDXC, FOC 1684, G-QRP 13178, IPA.
On 1 Mar 2011, at 22:29, K1FFX wrote:
> A reminder to new KPA100 builders ... the very last step in the
Good pic, I see the kit price is showing (blurred on my iPhone ) but it kooks
like $1,666.
Ken..G0ORH
Sent from my iPhone
Member of:-
RSGB, NADARS, CDXC, FOC 1684, G-QRP 13178, IPA.
On 13 Feb 2011, at 20:13, Robert Harmon wrote:
> Mike,
>
> Now you did it, I drooled all over my lap
, Jim wrote:
> Ken, that iPhone app is nice isn't it?
>
> 73 de KE4WY Jim
>
> Sent from my Starship
>
> On Jan 27, 2011, at 2:31 PM, Ken Chandler wrote:
>
>> And added to the IPhone K3 App please!!!
>>
>> Ken..G0ORH
>>
>> Sent fr
And added to the IPhone K3 App please!!!
Ken..G0ORH
Sent from my iPhone
On 27 Jan 2011, at 09:42, "Bruce Beford" wrote:
> Nice write-up on tips for using the APF function, Wayne.
> Would you please consider adding this to the K3 Operating Tips page on the
> Elecraft website? (and the
ANT out and PA Key in. There are other connections available, of course.
> It works _very_ well with the K3.
>
> Are you looking for anything in particular?
>
> Jack Brindle, W6FB
>
> On Jan 24, 2011, at 10:31 AM, Ken Chandler wrote:
>
>> I'm more intereste
I'm more interested in how the KPA 500 handles a full blown 48hr CW contest
with full QSK.
What connections are on
the rear panel, etc.
I just hope someone from the contesting brotherhood has it and given it a
really good workout!!
Ken..G0ORH k2, K3, P3
Sent from my iPhone
On 24 J
Thanks for info.
I was automatically informed of the K3 manual update availability.
My k3 manual is updated.
Thanks for a great App.
Ken..G0ORH K2, K3, P3
CW4EVER
Sent from my iPhone
On 6 Jan 2011, at 22:26, Michael Downs wrote:
> The K3 Micro Manual, an iPhone version of the K3 Owne
I believe that AFTER November 2009 !! all K3"s shipped had the Mod fitted as
standard.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 27 Dec 2010, at 22:36, "Julian, G4ILO" wrote:
>
> Was there not a modification required to the original KXV3 on the IF output,
> a resistor change or som
Hi
Does anyone have a wiring diagram to hook up a k2 to a SPE Expert amp.
Thanks
Happy Xmas.
Ken..G0ORH
CW4EVER
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
Has version 0041 firmware been withdrawn I cannot find it with the utility
software.
Ken..G0ORH
CW4EVER
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.q
Yes, I to downloaded a manual for my iphone a long time ago, but this is nicely
broken down into sections, a dab on the screen with ones digit es hey presto
it's their!!!
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 25 Nov 2010, at 13:03, "Geoffrey Downs" wrote:
> Although I have jus
Great App.
Yes, downloaded it, has everything on your iPhone in one place.
No need to take a manual with you into the field for FD or a DXpedition!!
Firmware dates up to 4.22
Its not free but at 0.59 p well worth it.
I also have the k3 programmer's guide App.
Ken..G0ORH k2, k3, p3.
CW4EVER
Sen
Hi gang
Anyone using the K3 and Quadra amp,
I'm using one in cqww with club call G7N, and just wondering what the config:
TX DLY, should be set at!!! And perhaps any other tips.!!
This is a club effort, but my K3.
Ken..G0ORH
CW4EVER
Sent from my iPhone
__
Hi
I cannot use my APF due to a loud howl, it's sounds like a gale blowing through
a pipe.
It's impossible to copy weak signals in the Ukrainian dx contest.
I've make a short video of it on my iPhone if anyone wants to hear it.
I'm just wondering if I have anything else set which is interacting wi
Yaesu DMU unit can display everything, adjust settings, etc, etc etc.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 31 Oct 2010, at 01:30, Don Wilhelm wrote:
> Barry,
>
> I don't believe there is anything out there that only displays the
> parameters. Most applications that display t
Thanks for you ob's Richard.
Well perhaps the powers to be can secretly have a look-see at the variable Q
and IF they collectively think it's well worth the mod then, 'make it so'!!!
Ken..G0ORH K2, K3, P3.
CW4EVER
Sent from my iPhone
On 30 Oct 2010, at 18:18, Richard Squire - HB9ANM w
This is a really good thread and I'm enjoying reading the theory!
I'm always being called off frequency during contests so SHIFT would be the
obvious choice!
Being an ex FT2000 owner I used the contour settings and it was bril.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 26 Oct 2010, at
Ah that's good, I to was wondering on the exact same issue!
Well now we know
Tks
Ken..G0ORH k2 k3 p3.
CW4EVER
Sent from my iPhone
On 20 Oct 2010, at 16:32, Wayne Burdick wrote:
> Hi Steve,
>
> The KPA500 will be available fully assembled or as a no-soldering kit.
>
> The amp's PC b
Absolutely fine here.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 17 Oct 2010, at 15:25, Brian Alsop wrote:
> Congratulations on your fine motor skills. Just maybe there are a group of
> us out there whose skills have significantly degraded over time.
>
> A user defined longer time
I have just been on 21027.0 calling on a dead band in cw.
I've noticed that my tx frequency on the P3 was 21027.8 (both k3 & p3 were
reading same frequency)
I adjusted to width to 500hz and I may have pressed another button but the next
call I made the tx freq was smack bang in the middle of the
I have been running 100w output using AFSK A in the RTTY contest and I have
been monitoring my PA temp via the meter. I have my fan set for FN2 constantly
on, and the temp has only reached 45C.
Ken..G0ORH
CW4EVER
Sent from my iPhone
On 24 Sep 2010, at 17:47, "Dave Hachadorian" wrot
I'm a 99% cw op, mine are 2.7 (soon 2.8) 2.1, 500, 400, 200. Sub is 2.7, 500.
The 400 I use always for contesting.
Doing CQ WW RTTY as a low power multi single, this weekend as first time ever
on this mode have WinTest es mmtty es setup for AFSK A.
What is the preferred filter width min es max i
you’ll see the TX LED flash (you’ll also
> see MCU LD on the LCD); (4) load the correct firmware version.
>
> Worked for me..
>
> GL,
> Rick
> K6LE
>
> On 9/19/2010, at 4:20 , ken chandler wrote:
>
>> Hi
>>
>> Thought I would load up the latest
Hi
Thought I would load up the latest beta firmware. Have had no problems in
the past loading the beta. However, after an on screen message turn p3 off
the k3 lock-up and have MCU LD on screen.
The k3 would not power down so I switched the supply off!
Now I have the TX lamp flashing
0", the transmit signal will be inverted.
>
> The setting of CW rev is independent of DATA mode settings.
>
> 73,
> Don W3FPR
>
> On 9/12/2010 6:13 AM, ken chandler wrote:
>> Hi Gang
>>
>> Have just worked VQ9LA on 15m RTTY in DATA MD, FSK D. 45 bps
Hi Gang
Have just worked VQ9LA on 15m RTTY in DATA MD, FSK D. 45 bps it decodes very
well, using my Morse key.
I tried working him for 10 minutes with 100w, he then works me and told me
I'm in reverse mode and he twigged as he knew I was calling so he went
reverse his end and worked me.
I have n
Hi Gang
Anyone using DX4Win with the K3, The MODE in DX4win will not recognize PSK31
on k3 and is defaulting to RTTY mode.
IN DATA MD I am using PSK D.
I have tried changing settings in DATA MD ie data A, on the k3 but no
change.
In DX4Win I have the mode box ticked for PSK31 RTTY.
I have also
What I'm more interested as a big CW operator, rag chewer, DXer, es Contester,
is It's ability to handle full seamless silent QSK using quality vacuum relays.
Have Elecraft got that bit right!!
Ken..G0ORH K2, K3, P3.
Sent from my iPhone
On 8 Sep 2010, at 21:14, "tom_k1tl" wrote:
>> F
Hi
I'm looking at WriteLog for contesting, anyone using this program with the
K3 using modes CW PSK RTTY ( not interested in SSB)
Are there any issues in configuring the software!! Also the P3!
Perhaps a email off reflector might be more appropriate for this topic!!
Thanks
Ken..G0O
In Field day we have a few fiddle fingers (Um wonder what this does) etc,
by setting up a 3 digit user configured number within CONFIG OR MENU, set using
the keypad this would be just great.
I'm sure elecraft would consider it!!!
Protecting our valuable settings!
Ken..G0ORH k2, K3, p3.
Sen
1 - 100 of 147 matches
Mail list logo