Sold.
On Wed, Oct 23, 2019 at 4:04 PM Ken Nicely via Groups.Io wrote:
> I am selling my KX3 transceiver.
>
> KX3 KX3-K 160-6 M Transceiver
> KXAT3 Internal automatic antenna tuner
> KXBC3 Internal NiMH Charger/Clock
> KXFL3 KXFL3 Dual-Passband Roofing Filter
> K
Cable
Soft Case
I am the original owner.
Asking $1100.00 shipped CONUS.
https://photos.app.goo.gl/oG7jeYb3YsuKAz1EA
Please respond directly to k...@nicelyweb.com if interested.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http
For Sale:
Fully Loaded Elecraft K3/100, 100 Watt, with 2nd receiver, general coverage
module, internal tuner, voice recorder, 2 Meter module, transverter IF,
and 9 filters. Serial number 3115. $4,863 invested. Working perfectly.
K3/100-F1 K3 100W Xcvr.
KAT3-F 1 K3 ATU
KUSB
e as well..
I can send photos to interested buyers.
Contact Ken KE3C at k...@nicelyweb.com or call 610-952-3602.
On Wed, May 10, 2017 at 4:15 PM, Ken Nicely wrote:
> Electaft K3/100, 100 Watt, with 2nd receiver, general coverage module, 2
> Meter module, internal tuner, transverter
Electaft K3/100, 100 Watt, with 2nd receiver, general coverage module, 2
Meter module, internal tuner, transverter IF, voice recorder and 9
filters. Below is a total list with the prices I paid. Serial number
3115. $4,863 invested. Working perfectly. I am asking $3,200.
K3/100-F$2089.95
I can't believe they are letting you go on vacation ;->
So you are not taking the laptop. The more important question is.are
you taking a radio?
Ken (KC) KE3C
On Fri, May 31, 2013 at 8:05 PM, Don Wilhelm wrote:
> Hi,
>
> Since I get frequent requests for assistance and information from t
I had this same issue about a week ago. I did call Electraft and they
asked me to remove the cover and check some voltages. I knew the problem
had started when I was messing around with the rs232 connections, so I
thought I would undo the changes before I started working on the radio.
I think i
Don,
You have better not die on us! I still a lot to learn from you ;->
Keep up the good work.
Ken (KC) Nicely, KE3C
On Sun, Mar 31, 2013 at 8:54 PM, Don Wilhelm wrote:
> No joke, I am alive and well. Sorry you interpreted all the posts that
> way. If you want to see the origin of those p
iginal Message- From: Ken Nicely Sent: Saturday, March 16, 2013
> 3:12 PM To: elecraft Subject: [Elecraft] * on KPA-500
> What does the * on the left side of the KPA-500 mean? I have been looking
> for this in the manual and can not fin
What does the * on the left side of the KPA-500 mean? I have been looking
for this in the manual and can not find any mention of it.
Ken KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://ma
The Ethernet port is long overdue. Although, having tried to implement
that in a PIC myself, I can tell you it is a lot more challenging in a PIC
controller than it is on a PC. Still I would love it. The pigtail is okay
as a substitute.
Ken (KC) Nicely KE3C
On Fri, Jan 4, 2013 at 3:11 PM, Nate
Well, I guess it is new to me. I did not know it was used so long ago.
Why not 8 tonesbecause I have trouble decoding 2 in my head.
I hope everyone enjoyed the diversion. I figured that this group, being a
good number of hard core CW operators, would appreciate it. I initially
thought of
A new digital mode that can be sent and received without a computer. You
just have to learn it.
http://www.ke3c.com/ToneWave.php
Ken (KC) Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The New Elecraft D3 power supply.
Features:
- Software defined power supply.
- Software upgrades via the web.
- Microprocessor controlled voltage and current meters with LED bar
graph.
- RS232 connection to K3 so you can monitor you current and power draw
with your PC.
- Auto
Glad you shared. I had been thinking about using a bluetooth headphones,
but I will avoid them now.
Ken KE3C
On Sat, Sep 1, 2012 at 4:38 PM, Sanger, Joseph wrote:
> Well, I just figured out the 'problem' with the delayed response of keying
> the KX3 rig I'm LOL'ing.
>
> I have been playin
talks to the device it needs to talk to.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
allow the K3 to communicate independently with each
software application.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 10:43 AM, R. Kevin Stover wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Not such a good idea either.
>
> Elecraft would have to provide drivers for
just need the option for those of us that want true performance and a
clean interface to that understands who it is talking to.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 11:22 AM, Steve Jackson wrote:
> Ken
>
> A variety of inexpensive (3rd party) devices are on the market to do
> ex
communication. Most of the time would be adding the setup screens.
Ken Nicely KE3C
On Sun, Aug 29, 2010 at 8:36 AM, Brian Alsop wrote:
> Ken Nicely wrote:
>
> > Please give us a network port on the K3 and P3. This would allow each
> > program to independently communicate wi
be quick to add it.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
I personally have tried about 5 different adapters. Even USB-RS232 adapters
from with the same chip set different sources seem to function differently.
It took 5 adapters before I found one that would work with my laptop.
Personally, I think the issue is that different adaptors function
differen
You are certainly right that there would need to be some intelligence added
in on the hardware side. Some of the newer pic controllers like the
pic18f87j60 (I happen to be playing with that one now) have much of the
functionality built into the controller and there are libraries for the
routines,
There are several free software applications that emulate an rs-232 port and
send the rs-232 commands to a configured ethernet IP address and port.
They work very similar to LP Bridge, but they allow you to forward the
communication to the ethernet port. Once the software is installed it
creates
No no no
Just add Ethernet.
On Mar 13, 2010, at 2:08 PM, eric manning
wrote:
> All in favour of a USB port on the K3?
>
> Then we could forget about un-necessary, expensive , flaky and
> crash-prone USB to serial adapters.
> THe serial port with its RS-232 interface is obsolete. It dates
I had been out of the hobbyor maybe I should say, "less
interested".for several years and a good friend of mine Andy, KD3RF
recommended that I get a K3. It has really reignited my interest and opened
up a whole new level of the hobby to me.
While I am nowhere near your location, I can tel
This is just a guess, but the most likely scenario I can think of is that
the Software is getting a connection to a com port that is not the K3.
Maybe you could try disabling any other com ports through device manager
and then try to start the K3 utility. If it is connecting to another com
port,
I have the MFJ 264
http://www.mfjenterprises.com/Product.php?productid=MFJ-264
I have been using this for about 9 months now without a problem. I use it
to tune the amp putting about 500 or 600 watts into it for short periods of
time with no problems. If you want a nice one that you wont outgro
I don't think it comes with the amp. It is just a cable with RCA
connectors on each end, one half of a left right speaker cable will
do. Some claim it should be shielded cable, but I have used
unshielded with no problems.
KEN. KE3C
On Feb 21, 2010, at 3:09 PM, David Herring wrote:
>
Hilarious!
Ken KE3C
On Tue, Feb 9, 2010 at 6:58 PM, Mike B wrote:
>
>
> Grant Youngman wrote:
> > Too good!! :-)
> And too true!
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://
T1 and AUX_RF if you have your SUBRX plugged
> into the AUX_RF BNC jack. Or you can use RX_ANT and ANT2 or AUX_RF.
> The RX_ANT port can only be used on the main RX or both RXs at the same
> time it can't be used on the sub RX only.
>
> ~Brett
>
> On Sun, 2010-02-07 at 12:37
would also be interested in knowing if there are others on the list that
have done some PIC programming and what language and software they use or
would recommend.
Ken Nicely KE3C
__
Elecraft mailing list
Home: http://mailman.qth.net
So does the receive antenna have to be on the aux port of the Receive Ant.,
IF out board (KXV3A) for diversity, or can it also be on Ant2 of the ATU
(KAT3-F)?
On Sun, Feb 7, 2010 at 12:17 PM, Bill Johnson wrote:
> That should read aux antenna when in b-set
>
>
>
> *Bill*
> K9YEQ
> KX1, K2, K3,
This morning I was listening on 15 meters using ant2 which is hooked to one
of my verticals. I switched to ant1 (my second vertical) and I could barely
make out the signal. While still set to ant1 I switched to diversity
receive and I still could barely hear the signal in either ear. I then
swit
You did a nice job running the net Roger. Thanks for running it.
Ken N3PSJ
On Sun, Jan 17, 2010 at 11:17 AM, Roger Stein wrote:
> Will do...K7SJ...1 KW 2-el Quad at 50' headed 'out there'! All relays
> welcome.
>
> 73, Roger
> K7SJ
> K3 #75
> On Sat, Jan 16, 2010 at 12:28 PM, wrote:
>
> >
34 matches
Mail list logo
