Glad you shared. I had been thinking about using a bluetooth headphones, but I will avoid them now.
Ken KE3C On Sat, Sep 1, 2012 at 4:38 PM, Sanger, Joseph <joseph.san...@nyumc.org>wrote: > Well, I just figured out the 'problem' with the delayed response of keying > the KX3 rig .... I'm LOL'ing. > > I have been playing with a Bluetooth transmitter / headphone on the device > ... the audio sounds GREAT .... and it's really a pleasure not to be > tethered to the unit .... but ... > > Well, I guess you can figure out the rest. There is a slight delay in the > arrival of the keyed tones to the headphone relative to my pressing the key > ... destroying my ability to produce readable code. > > I am a bit red-faced ... but appreciative of those who offered help. > > :-/ > > Joe - WB2SSB > > -----Original Message----- > From: elecraft-boun...@mailman.qth.net [mailto: > elecraft-boun...@mailman.qth.net] On Behalf Of Sanger, Joseph > Sent: Saturday, September 01, 2012 9:13 AM > To: <elecraft@mailman.qth.net> > Subject: [Elecraft] KX3 CW Key Sluggish Response > > My KX3 is behaving unusually this morning, so much so that I cannot use it > for CW (I normally send at about 25-30 WPM; I now cannot send more than > about 12 WPM). The first character is beginning, I don't know, about ½ a > second delayed from when I press the paddle (both dit or dah) and extra > dits/dahs seem to occur beyond when I stop pressing the paddle, causing > enough confusion in my brain to obviate my sending readable cw. It's not > the paddle itself; the behavior is consistent even using my Begali > outboard key. Adjusting the QSK delay makes no difference (really didn't > expect it to as that delay is the 'hang time', not the start time). I > don't take advantage of iambic modes (although the mode selected is 'A'). > Any suggestions would be welcomed and appreciated. > > I should add that I just updated the unit to the latest firmware: MCU 1.12 > / DSP 0.94, but the problem's relation to this may or may not be > significant. > Thanks > > Joe - WB2SSB > > Joseph Sanger, M.D. > Associate Professor of Radiology > Director, Radiology Informatics > (212) 263-3434 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html