Hello all,
I have a new K3 : ), and am new to the reflector. I was reading the digest
this morning and found your entry relating to the yamaha CM500 headset
interesting
I have not tried SSB yet, and I have a number of microphones here including a
Heil Proset plus (which looks like it would
I have K3, S/N 1884 running latest FW vers 4.48. Also using P-2 and KPA500 in
the chain.
While plugging in headphones into the front phones jack, the speaker no longer
mutes and I am only able to receive one channel through headphones. The phones
jack was working perfectly in the past.
I c
I am NOT using a P2!! It is a P3. hi hi
Tnx
Len, K6LEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
I am hoping to find a four band module for my K1. If anyone has one, built or
unbuilt, I would like to hear from you.
Tnx. Len, K6LEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mail
I am selling my K1-2 two-band (20 and 40) transceiver S/N 00813. Beautiful
condition/no smoke with the following options:
* KAT1 Antenna tuner
* KBT1 Internal battery option
* K1KBLTLIT Backlit disolay option
* KTS1 Tilt stand
* FDIMP Finger dimple for tuning knob
* Manual and all documen
I am selling my excellent condition K2/QRP, S/N 02526(B) with the following
options:
KSB2 SSB option
K160RX 160m receive
KNB2 Noise blanker
KAF2 Audio Filter
FDIMP finger dimple
Keying jack on rear panel
Original radio manual and documentation for all options
This radio operates 100% and was rec
Hello,
I have a new KPA500 now connected directly to my K3 via the optional KPAAux
cable purchased through Elecraft. I am attempting to set up the per band power
settings, and have the Config: power settings at "per band". I am running the
latest FW releases on both the KPA and the K3. Accord
Thanks to all of you on the reflector who took the time to provide information
relating to the pre-set power levels between my K3 and KPA500. Tnx to Guy,
W2AV for pointing out that the aux cable may not be seated properly in the Aux
port or a potential bent pin. He was right!! I inspected the
I am enjoying my new KPA500 coupled with my K3, and I have set up the K3 to
transmit at approximately 25 watts in the "operate" position on all bands
except 30 meters. However, if the amplifier menu is set to default to "operate"
mode upon KPA500 initialization, I experience an immediate over
I am utilizing FW vers. 1.02 and connecting to the K3 via the aux bus cable. If
I set the KPA500 "PWR ON" menu setting to OPER, the K3 will not show the
"KPA500 OPER" on the display and apprently is not syncing. In that state, if I
transmit, the amp will immediately go into a Hi Pwr fault. (no
I received Beta FW version 1.11 from another reflector user and I installed it
in My KPA500. The Hi Pwr fault in OPER mode seems to have gone away!
Hopefully this new FW will be openly available soon. Conact me if you have any
questions. Tnx. Len
_
If anyone has the following modules, I would be interested in purchasing:
4-band module for K1
KBPF3 Genral coverage RX band module for K3
Please let me know what you have.
Tnx and best 73
Len, K6LEN, 310-261-6696
__
Elecraft mailin
I have a QRP K2 that I would like to keep at that power level. I also have a
KPA500 that I use with my K3. I would, however, like to use the KPA500 with
the K2 w.ithout having to upgrade the K2 to 100W. Is this something that
anyone has experimented with? Tnx. Len
___
Hi Mork. Mom's on her way
Sent from my iPhone
> On May 28, 2015, at 1:45 PM, elecraft-requ...@mailman.qth.net wrote:
>
> K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/m
Hello all. I am new to the reflector and have a new K2/100, S/N 5553 that I am
really enjoying.
I am noticing a couple of strong spurious signals on 17m..18.088.4 (S5), and
18.104 (S4). I am running the RS232 output to my laptop, and when I unplug the
serial cable on the laptop, the signals dis
Happy new year to all! I am curious to know if anyone on the reflector has
experienced this issue. I occasionally like to use my KX2 at QRO power. I
have the ACC output of the KX2 interfaced to a KPA500 which is interconnected
to a KAT500 antenna tuner. When the tuner is not powered, the KX2
I am selling two of my Elecraft field radios, both in excellent operating and
physical condition.
1. KX1, S/N 00427 with 40, 30, and 20 meters. Includes: KXAT1 antenna tuner
and KXPD1 iambic paddle. Also includes original manual. This unit was checked
out by Don W3FPR and is a great radio t
I have been reading the many comments and questions relating to the virtues and
(in)capabilities of the various rigs now available. In my shack I have the
complete K-line including the KAT500 tuner and SP3 speaker. All great
equipment, but since receiving my KX2, it is my “go to” radio! It is
I am in need of a KXV3A I.F. out board for K3. If you have one to sell, I am
interested in purchasing from you. You can reach me at K6LEN@ARRLnet or
310-261-6696. Tnx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/list
I am selling my KXPA100 with built-in antenna tuner. S/N 1564 in 100% physical
and operating condition as I have not been using it and need the funds to
replace my antenna. Unit comes with power cord and manual. Asking $925 which
includes shipping CONUS. Please contact me for questions or pho
Thank you
Len, K6LEN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Our club has decided to go a different direction. For sale is a one month old
PX3F factory built panadaptor with very little use. Complete with original
packaging, manual, and all cabling to operate with your KX3. Cost was $632
with tax and freight. Sell for $485. including shipping CONUS.
MH3 microphone and KXPD2 paddle still available.
Tnx
Len
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: htt
23 matches
Mail list logo