Re: [Elecraft] KX3 update utility download removed (i.e. blocked) by Norton Internet Security in Windows 7

Norton will allow you to override and installs it just fine. Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Oliver Barrett Sent: Friday, March 17, 2017 11:52 PM To: Elecraft@mailman.qth.net Cc: Oliver Barrett Subject: [Elecraft] KX3 u

Re: [Elecraft] The market for Full Kit Radios?

Clifton Web used to make a precision IF buffer with a SMA connector Out of the back of the k2. I have one in my K2. That circuit schematic is on the web, there you Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Sund

Re: [Elecraft] K3 for SWL?

Well with the short wave stations just about gone, except for the religious stations, I not sure I see the point. But my K3s with the sub receiver so you can run diversity receive is the hottest receiver I have owned in my 50 years of doing so. Way overkill to receive the few multi kilowatt

Re: [Elecraft] CW macro for K-pod

Is there a macro that will send the CW ID when you are in side band? I have my K3s set to key CW in in side band, but the macro below does not Send when in side band. Thanks Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady, Fred S

Re: [Elecraft] KPOD- POWER Macro

In a TAP position I have TUNE5WPC005;SWH16; goes into 5W tune, Tap again it goes to operate. In the corresponding HOLD I have TUNE15W PCO15;SWH16; Goes to 5W tune(I have the CONFIG TUNE PWR set to 5W), sets the drive level to 15W. TAP it again it goes to operate. That gives me

[Elecraft] KPOD macro help

I am doing something wrong when it comes to PRESS or HOLD macros. Does anyone have a macro that PRESS tunes at one power, and HOLD tunes at higher power? I can make one button do one or the other, but when I combine to one button it only one will work. Any way to make the volume increas

[Elecraft] Macro help

I am having some success with the Kpod marcros. I have read thru the programing reference But still need some help I am a macro beginner. 1. What would be the one tap turn on the diversity one hold same button turn it off macro. I can make it do it but it does not turn off the SUB

Re: [Elecraft] KX2 - Option Pre-Installed?

Its all ready to go when you get it, man is it ready! Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of MaverickNH Sent: Monday, July 18, 2016 4:26 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KX2 - Option Pre-Installed? I just pu

[Elecraft] Kpod arrival

Kpod arrived today. New K3S so one cable and it's working. Now to try to program some macros. Leroy AB7CE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] KXPD2s now shipping against backlog

Good, I hope mine gets here so I can show off the KX2 ant the Glacier/Waterton hamfest at Glacier Park next week. Hope my Kpod is somewhere too. There's a spot where my hand rests on the desk when I relax in my chair that's waiting for it. :) Leroy AB7CE -Original Message- From: Elec

Re: [Elecraft] Cannot connect to K3S utillity

Does not matter, still won't connect. Tried two Win 7 computers. -Original Message- From: Nr4c [mailto:n...@widomaker.com] Sent: Monday, June 13, 2016 8:35 AM To: Leroy Marion Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Cannot connect to K3S utillity Locate RS-232 i

[Elecraft] Cannot connect to K3S utillity

I am the proud owner of K3S SN 10823. After sleeping on it, I still cannot get the Utility to connect. My computer sees The radio it on COM5. I have turned off everything else connected, the amp, tuner and P3. I need to figure this out so I can save configs, so when I goof up I can reloa

[Elecraft] test

test __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list

Re: [Elecraft] Getting Started With CW

I have from the Schurr Profi to home made keys. One of the best I have is the Norcal paddles Kit key,. It’s a magnetic(versus springs ) type key. I did put silver contacts on it. It was picked up by Vibroplex and made as the Code Warrior, I think. I don’t think Elecraft sells the magn

Re: [Elecraft] K3 CW decoder and CQ CW contest

If I had to use a straight key, I would give up CW entirely. I went right to paddles and a keyer. I have about 20 various CW capable radios, every one of them has a built in keyer Does not a paddle and keyer give you perfect timing? Leroy AB7CE -Original Message- From: Elecraft [mail

[Elecraft] MC-60 microphone

Here is a different problem for K2 gurus: Using a Kenwood MC-60, when keyed it toggles the K2 into transmit, and won't come out of transmit until you cycle power switch. Hand mic or Heil with foot switch works fine. Batteries in or out of MC-60 makes no difference. It worked for Yea

Re: [Elecraft] FT5SM en route as VK6FZM/MM using KX3 + KXPA100

I was lucky enough to visit (although not operate from) Amsterdam Island in 1987. When we arrived the main ship's VHF Marine Band radio had broken so we conducted our ship to shore communications on 40 metres. We had a very rough passage from Fremantle travelling a lot further south than the curren

Re: [Elecraft] CW Key suggestions ?

N3ZN Keys. Beautiful, precision, fully adjustable, AMERICAN made. I have lots of keys(including Schurr) and it’s the one I use. Leroy AB7CE -Original Message- From: John Strandberg Sent: Sunday, June 24, 2012 6:59 PM To: Ronald Nutter Cc

Re: [Elecraft] IF tap?

Or to your softrock for a panadaptor. Clifton Labs has high quailty/easy to build IF ports. I put one together in my K2, it works excellent. Leroy AB7CE -Original Message- From: Don Wilhelm Sent: Monday, January 02, 2012 2:01 PM To: Steve KC8QVO Cc: elecraft@mailman.qth.net Subject: Re

[Elecraft] KX3

Wow! A while back when we were throwing out ideas for an Elecraft wish list, I expressed a desire for a KX1 that covered 15 and 10 meters. I sure got that and more! I’m tempted to ask for a 100 MPG hover craft and see what happens! My only question now

[Elecraft] anyone have a KX1 or k1 that is excess

looking for KX1, 40/20 is fine. Auto tuner nice but not absolute. K1 would also work. email me off list please Roy AB7CE __ Elecraft mailing list Home: http:/

[Elecraft] Yet another product idea

I enjoy QRP Give me a KX1 that does 20, 15, and WOW, 10 mtrs! The 80mtr end is of no use, push it up to some real low power QRP bands. Then a handheld 2 watts would be incredible! And maybe options for 17 and 12 mtrs.

[Elecraft] XV50 transverter CW use

I just finished a XV50 transverter. Using it with a K2 with the KI02 control. It seems to work OK when keyed for SSB. When I use CW, its relays click and chatter like mad. Do I have some thing set wrong? Roy AB7CE ___

Re: [Elecraft] K2 lifespan

l you tell them. I also have the K1 and the KX1, they are as high quality and fun. The workhorse is my K2. Its been a fun run that’s not over for me. Leroy Marion, AB7CE K2 SERIAL NUMBER 40 -Original Message- From: Shane Sent: Wednesday, March 23, 2011 9:05

Re: [Elecraft] MH2 Microphone audio quality

r not. 73 Roy AB7CE -Original Message- From: Don Wilhelm Sent: Friday, February 25, 2011 5:24 PM To: Leroy Marion Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] MH2 Microphone audio quality Did you purchase this K2 used, and/or do you know what is inside it? What

Re: [Elecraft] MH2 Microphone audio quality

I just purchased a MH2 to use with K2. I'm getting reports of 5/9 but with some distortion or "rattle" audio with mic gain on 1. If I try other mics, I get clean audio reports but way down in signal strength. The resistor is installed and jumpers there. A Kenwood dynamic mike wired for K2 gets t

Re: [Elecraft] kpa-500

Is the KPA 500 going to be K2 compatible ? Roy AB7CE -Original Message- From: Phil & Debbie Salas Sent: Monday, February 21, 2011 6:21 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] kpa-500 "...I have a k3/10 and wonder if a

Re: [Elecraft] Taken the plunge!

You will not be disappointed. Just last night I worked 160 meter Delaware and Kentucky, QRP 10 watt SSB to 10 watt SSB, and many other QRO stations. I can work any state on 160 with 5 watt CW. Astonishes the Big guns. Its all about antennas anyway. Roy, AB7CE,

[Elecraft] SCREEN

On lp-pan web site they give an example of sdr,trx manager, skimmer,n1mm logger all on the same screen. How do you set it up to run like that. I have a large monitor and it would be nice to have all the programs on the scrre at the same time instead of toggleing.   Joe _

[Elecraft] comatability with 64 bit system

I did not realize that sdr 1.19 was not compatable with the 64 bit operating system. I have not been able to get any version of sdr either iq or if to work. I have been able to get sdr if to work on my old laptop that has a 32 bit system but it is so old that it uses 100% of the operating system

[Elecraft] VISTA 64

I have been working with larry trying to get a psdr to work on my vista 64 bit machine. We were able to get sdr iq but not sdr if to work due to the access error. What I stumbled across was that even though I had adm priv's I need to go to the folder power sdr if 1.19 right click on it go to sec

[Elecraft] setting up lpan

I am having difficulty find any documentation for the basic settings for sdr iq 1.12.2. I am running vista 64, eu-202, l-pan 9.973 direct serial port with a new k3 2 days old. The l bridge connects to the k3 and the virtual port connects and it seems with proper streaming but when I start the po

Re: [Elecraft] Bird 43 Wattmeter calibration

> Hello All, > > Does anyone have any suggestions for calibrating a > Bird 43 and the respective slugs? I picked up a used > one and would like to check it out. > > Thanks, > Julius > n2wn > Lab cal is done by puting power through it measured with a known standard. Adjustment is done with pot aces