I picked up some more parts, enough to make a few (<10) more Bluetooth
serial interfaces.
These are designed for the K2/KIO2, but can be used with K3 or KX3.
See http://n5ib.net/Index.xht
There's enough info there to roll your own.
73
J
ather than Bluetooth, so needs a
network environmment.
Anbody know of any I missed, or any in the works?
Alas, my programming skills would be at the level of "Android Programming
for Dummies" :^))
73
Jim, N5IB
__
Elecraft mai
ACLog, and have tried it out with an
older version of Ham Radio Deluxe.
Info (schematic, BOM, photos) here:
<http://n5ib.net/Elecraft%20K2%20Bluetooth%20Interface%20Overview.pdf>
72,
Jim, N5IB
__
Elecraft mailing list
Home: http://ma
o the DB9 on the back of the K2, stealing its few MA from the KIO2
connector.
But then... reality check... surely I'm re-inventing the wheel. A modest
web search didn't turn up much that is recent.
Anybody done this, or know of such a gad
equency and the
pitch got lower, you were on the lower sideband side of the carrier.
Jim, N5IB
On Wed, 20 Feb 2013 08:02:45 -0500 Pete Smith N4ZR
writes:
> normal for the K3 in CW is
> lower sideband on all bands. I wonder if this is generally true of
> modern transceivers - seems to me
ed to slip over the rebar.
Have used it on 80, 40, 30, 20, 17, 15, 12, and 10. I'm beginning to
believe it works better than my 40 m full wave loop at home that is only
15 ft or so off the ground.
73,
Jim, N5IB
Woman is 57 But Lo
box
obtained at the WalMart camping dept, with a couple of O-ring sealed BNC
bulkhead fittings to get the cables in and out.
73,
Jim, N5IB
Look Young in 17 Seconds
Doctor Reveals Lazy Way To Look Up To 15 Years Younge
"noisy audio gain pot" mod was NOT done, so there's some noise when
turning the pot, but it never bothered me.
A copy of the user's note describing the mod is included.
73,
Jim N5IB
Serve® Digital Prepaid
Get $25
n Sprint.
73
Jim N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:
Ohio State and LSU radio clubs are planning an event. Here's the
announcement going out to the usual outlets.
73
Jim, N5IB
-snip---
Ohio State and LSU - Tailgating on the Air
CQ Buckeyes, CQ Tigers - Ohio State And LSU Radio Clubs Celebrate BCS
Gridiron
Championship
erator."
To that end, the magnetic signs we are making to put on vehicles when we
are doing public service communications at events will read
-
(with BRARC Club and ARRL logos)
Baton Rouge Amateur Radio Club
HAM RADIO COMMUNICATI
that serve as one more cross-check, but in addition to a physical sense
of the part location I also gained some insight as to its purpose in the
circuit.
73
Jim N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
d
surmise. Pretty bitter pill to swallow... paying premium bucks for a
better grade of nothing :^))
So, if your working around higher voltages than most of our QRP gear, I
guess it's best not to inhale :^))
73
Jim N5IB
___
Elecraft mailing list
t;
Amazing how they knew it would work at 327 but not at 329. Of course what
was meant was that the range was about 100 meters. :^))
73
Jim N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
S
"tinkerers" who could make it work.
Jones also relates that as a boy he had built a SW receiver that could
pick up Australia, and had received from Radio Australia a QSL card
signed by the English Test Team (cricket, for us yanks)
73
Jim N5IB
ot officially
clandestinely yours,
Scotty, aka N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/l
e air trapped in the case. I'd take them out right after
use though. My K2 is a temple, and I don't put no junk in the temple.
:^))
73
Jim N5IB
K2 #1233
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to po
'm told they support the full ASCII set and have
integrated error correction.
Anyway, Don's kit are great - good parts, good boards, and good
instructions, at a good price...
The usual disclaimer... no pecuniary interest, etc...
72
Jim N5IB
___
d
remove feeders.
If you worry about tension pulling them apart, just use a cable tie to
secure the connection.
73
Jim, N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
o check those flyspecks I pulled off that old VCR board
72
Jim N5IB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/
20 matches
Mail list logo
