RE: [Elecraft] PSK audio problems with K2

Stephen When I do PSK with my K2 (or K3) I set the amplifier power at max value and then drive it with just enough audio signal to get 20-30 watts out. This yields a signal with -29 to -30 db IMD on my KK7UQ IMD meter. Hope this helps Bob KD8CGH

[Elecraft] K3 Ham Radio Deluxe - Tuner Macro

Great news about HRD support for the K3 My first macro is a tuner command to replace the unfortunate tune behavior of the K3. Unlike the K2, which drops power to about 20 watts, the K3 will use whatever power you are set to. This isn't good for the tuner or the K3. I have already caused my K3

[Elecraft] YAQ - Yet Another (K3) Question

Will data from the K3 internal data mode decodes be available to an external PC for logging and other purposes? Bob Benedict KD8CGH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list.

[Elecraft] Elecraft K2 and Microham Microkeyer problems

Roberto I use the Microham Microkeyer with my K2 for RTTY and PSK31 with no audio level problem. I also take the audio from J5 as suggested. The only problems I had were getting the modes set correctly on initial setup. After that it has worked well. I had to put it in follow radio mode to

[Elecraft] KRC2

Hi I would like to use a KRC2 with my K2 to; bandswith my amp bandswitch my tuner (better yet set switchs on band segments) control a remote antenna switch (multiple bands for each antenna) provide one button tune for the tuning I would like to hit a button somewhere and have: the amp

[Elecraft] K2, MicroKeyer and RTTY

Has anyone been able to use the MicroHam MicroKeyer with their K2 in RTTY mode? I have functionality for AFSK PSK and RTTY when in L (LSB) mode, but when I choose r or r bar the MicroKeyer puts itself in FSK mode and won't pass the audio through to modulate the signal. Bob KD8CGH