On 2/26/2018 3:15 PM, Bob McGraw K4TAX wrote:
I found that not all RG-8X is created equal.
Absolutely! And this is true of ALL coax types. There's a lot of junk
floating around.
73, Jim K9YC
__
Elecraft mailing list
Home: http://ma
ble jacket.
Good luck!
73
Frank
W3LPL
- Original Message -
From: "Richard"
To: "Elecraft Reflector"
Sent: Tuesday, February 27, 2018 2:02:32 AM
Subject: Re: [Elecraft] RG-8X
The problem is often I get an answer or a request for more info, and I reply
withou
nt no
> matter what coax you select.
>
>
> 73
> Frank
> W3LPL
>
> - Original Message -----
>
> From: j...@kk9a.com
> To: elecraft@mailman.qth.net
> Sent: Monday, February 26, 2018 10:28:05 PM
> Subject: [Elecraft] RG-8X
>
> The original post by
or installation practices will degrade your investment no
matter what coax you select.
73
Frank
W3LPL
- Original Message -
From: j...@kk9a.com
To: elecraft@mailman.qth.net
Sent: Monday, February 26, 2018 10:28:05 PM
Subject: [Elecraft] RG-8X
The original post by W4KBX was thi
I found that not all RG-8X is created equal. For one project, I
measured 3 or 4 different brands of new RG-8X to find that the loss can
vary considerably. The measurement method was to use 50 ft, snake it
back an forth across the floor so as not to have adjacent coupling, the
ends fitted with
The original post by W4KBX was this: "I’m seeking recommendations for
RG-8X coax with the lowest loss. The total run will be about 100 feet."
You cannot defy physics and have low loss with 1/4" coax, no matter who
the manufacture is, but RG8X was his criteria.
John KK9A
Jim Brown K9YC wrote:
February 26, 2018 10:11 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RG-8X
On 2/26/2018 9:28 AM, j...@kk9a.com wrote:
I believe all RG8X has a .242 diameter PVC jacket and about the same loss.
Certainly some brands are better made, I use only Belden 9258.
Not quite. First, for at least 40 years,
On 2/26/2018 11:02 AM, Bob McGraw K4TAX wrote:
I did inquire as to the application. To feed a 6M yagi being a 6OWL6W. My
thinking, I would cringe at putting up a nice yagi such as this and not use the
feedline with the lowest loss possible. Most likely Andrew LDF4-50A hardline.
Me too! Th
I did inquire as to the application. To feed a 6M yagi being a 6OWL6W. My
thinking, I would cringe at putting up a nice yagi such as this and not use the
feedline with the lowest loss possible. Most likely Andrew LDF4-50A hardline.
Bob, K4TAX
Sent from my iPhone
> On Feb 26, 2018, at 12:2
Thanks for sharing! Very interesting.
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 02/26/2018 10:10 AM, Jim Brown wrote:
There's a tutorial on this topic at http://k9yc.com/Coax-Stubs.pdf
73, Jim K9YC
__
Elecraft mailing list
On 2/26/2018 9:28 AM, j...@kk9a.com wrote:
I believe all RG8X has a .242 diameter PVC jacket and about the same loss.
Certainly some brands are better made, I use only Belden 9258.
Not quite. First, for at least 40 years, RG-numbers are NOT a
specification, but only a generic description of ca
to rodent damage which
will quickly increase your coax loss.
73
Frank
W3LPL
From: Richard
To: Elecraft Reflector
Sent: Monday, February 26, 2018 8:35 AM
Subject: [Elecraft] RG-8X
I’m seeking recommendations for RG-8X coax with the lowest loss. The total
run will be about 100 feet.
Cheers
: Richard
To: Elecraft Reflector
Sent: Monday, February 26, 2018 8:35 AM
Subject: [Elecraft] RG-8X
I’m seeking recommendations for RG-8X coax with the lowest loss. The total run
will be about 100 feet.
Cheers!
Richard Kunc — W4KBX
In using ARRL Transmission Line for Windows application:
RG-8X Belden 100 ft @ 50 MHz has 2.5 dB loss
LMR-240 Times Microwave 100 ft @ 50 MHz has 1.7 dB loss
RG -213 Belden 8267 has 1.5 dB loss at 50 MHz
RG-8 Belden 9913 has 0.88 dB loss for 100 ft at 50 MHz. {Due to the
nature of this l
Richard..If you are set on using the small size the real LMR-240 is the best
bet..also may want to check with MFJ.. they now carry a very good line of
coax!!
73s Bob W5RG
From: Richard
To: Elecraft Reflector
Sent: Monday, February 26, 2018 8:35 AM
Subject: [Elecraft] RG-8X
I’m seeking recommendations for RG-8X coax with the lowest loss. The total run
will be about 100 feet.
Cheers!
Richard Kunc — W4KBX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
16 matches
Mail list logo