I bought a K3S and then I upgraded my #4XXX K3 which has two receivers with
every upgrade that Elecraft offered. It was mostly just a fun project, but
it's also a backup for the shack. One thing though, I swapped all the
filters and just put the 2.7KHz ones I got with the K3S in the K3. And I
also
Is there a menu item that says what synthesizer is installed?
Mike, NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Far worse than the K3 with the old synth in it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 1/25/21 5:04 PM, Wes wrote:
Yeah but... how did the Collins look?
Wes N7WS
On
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
What was the last K3 serial number?
73, Dick WC1M
73, Dick WC1M
> On Jan 25, 2021, at 1:46 PM, Scott Manthe wrote:
>
> The K3 had the new board after SN 8800.
>
> 73,
> Scott N9AA
>
>
>> On 1/25/21 11:33 AM, Mike Kopacki wrote:
>> Was the KSYN3A synthesizer ever built into the K3 as a
I wonder if I can upgrade my K3, (Sn # 53, yes 53), to the HRO-500
concentric knob? Anyone done that?
And yes, I have expressed interest to Elecraft for the synth upgrade.
We (K8AJ and myself) will be buying a K4, but when it shows up, um, she
gets primary use of it.
I'll be allowed to
to see what is in your radio.
73 Bill AE6JV
On 1/25/21 at 8:05 PM, hullspee...@gmail.com (Warren Merkel) wrote:
Date: Mon, 25 Jan 2021 11:33:35 -0500
From: To: Henry Pollock - K4TMC
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Difference between a K3 and a K3S
Was the KSYN3A synthesizer ever
Date: Mon, 25 Jan 2021 11:33:35 -0500
From:
To: Henry Pollock - K4TMC
Cc: Elecraft Reflector
Subject: Re: [Elecraft] Difference between a K3 and a K3S
Was the KSYN3A synthesizer ever built into the K3 as a standard item? If so,
beginning at what serial number?
Thanks,
Mike NJ2OM
Yes
Yeah but... how did the Collins look?
Wes N7WS
On 1/25/2021 5:16 PM, Dave Cole wrote:
I did something similar as well, I have a neighbor that lives around 700 feet
away, he ran a Collins S-Line. I convinced him to buy a K3, which he did.
I did screen grabs of his signal with the K3, and
Hi,
Remember those filters are Roofing Filters, not the normal filters you
see in a rig, and use to isolate a CW signal...
The digital filter, (you just dial the bandwidth you want from the front
panel), in the K3 far surpasses anything I have used in the past, I get
to very narrow
I did something similar as well, I have a neighbor that lives around 700
feet away, he ran a Collins S-Line. I convinced him to buy a K3, which
he did.
I did screen grabs of his signal with the K3, and neither of us having a
new synth, then when he installed his, then when I installed
I bought a K3 SN 8858 just before the K3S was announced at Dayton. It
had the new synthesizer. I was curious to see what the difference was
between the two and ran a few simple tests in my alleged lab using an
older K3 as a reference rig. I found the new rig had a lower noise
floor by a
Wow. Thanks for all the replies!
There are some options that I don't care about, like the extended receive
range. I would like the I/O board, DVR, 100w, ATU.
Not sure about the transverter but if I find a K3 that has it, fine. Is the
main reason for getting the transverter option is so you
D
> Sent: Monday, January 25, 2021 1:03 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Difference between a K3 and a K3S
>
> I think it was, but have no idea what the starting S/N was. It was near the
> end of the K3 run.
>
> 73,
> Carl
> AB1DD
>
> Resistanc
> -Original Message-
> From: elecraft-boun...@mailman.qth.net On
> Behalf Of AB1DD
> Sent: Monday, January 25, 2021 1:03 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Difference between a K3 and a K3S
>
> I think it was, but have no idea what the sta
: Monday, January 25, 2021 1:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Difference between a K3 and a K3S
I think it was, but have no idea what the starting S/N was. It was near the
end of the K3 run.
73,
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)
On 1
I agree.
My sort of early K3 ( s/n 17xx) simply has received every possible
upgrade put including the new synth board and the new I/O board. So is
pretty close to the K3S seems to me. If I was unlucky enough to have
purchased the last K3 I would have simply put in all the upgrades. Both
are
t-boun...@mailman.qth.net] On Behalf Of AB1DD
> Sent: Monday, January 25, 2021 1:03 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Difference between a K3 and a K3S
>
> I think it was, but have no idea what the starting S/N was. It was near
> the end of the K3
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of AB1DD
Sent: Monday, January 25, 2021 1:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Difference between a K3 and a K3S
I think it was, but have no idea what the starting S/N was. It was near
the end of the K3 run.
73,
Carl
The new I/O board was also an option that was sold separately as an upgrade
to the K3, as was the KXV3B, where the pre-amp was located. If you find a
K3 with all those upgrades plus the synth (like mine ;), it's pretty close
to the same thing as the K3S.
On Mon, Jan 25, 2021 at 7:48 AM AB1DD
The K3 had the new board after SN 8800.
73,
Scott N9AA
On 1/25/21 11:33 AM, Mike Kopacki wrote:
Was the KSYN3A synthesizer ever built into the K3 as a standard item? If so,
beginning at what serial number?
Thanks,
Mike NJ2OM
On Jan 25, 2021, at 10:51 AM, Henry Pollock - K4TMC wrote:
I think it was, but have no idea what the starting S/N was. It was near
the end of the K3 run.
73,
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)
On 1/25/2021 11:33 AM, Mike Kopacki wrote:
Was the KSYN3A synthesizer ever built into the K3 as a standard item? If so,
Was the KSYN3A synthesizer ever built into the K3 as a standard item? If so,
beginning at what serial number?
Thanks,
Mike NJ2OM
> On Jan 25, 2021, at 10:51 AM, Henry Pollock - K4TMC
> wrote:
>
>
> Mike,
>
> You can look at the numbers on Sherwood Engineering's Receiver Test Data
>
The K3 has a bipolar HPA, the K3S is FET. In my case the bipolar is more
reliable and has lower TX IMD.
Wes N7WS
On 1/25/2021 8:48 AM, AB1DD wrote:
Mike,
You don't get the new knob and bezel!
Seriously, You don't have the new i/o board, with it's sound card built in and
USB
Sorry, the below att levels should have been Preamp levels, and the ATU
should be built in! Need another cup of coffee.
73,
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)
On 1/25/2021 10:48 AM, AB1DD wrote:
Mike,
You don't get the new knob and bezel!
Seriously, You
Mike,
You can look at the numbers on Sherwood Engineering's Receiver Test Data
List, specifically the 5th, 6th and 7th items from the top, and the KX3 is
just a few items lower.
73,
Henry - K4TMC
On Mon, Jan 25, 2021 at 10:29 AM NJMike wrote:
> If a K3 has been upgraded to the latest
Mike,
You don't get the new knob and bezel!
Seriously, You don't have the new i/o board, with it's sound card built
in and USB connectivity. There are a couple other things changed on the
mother board that you can't get anyway with out buying a K3S. They
weren't showstoppers for me. There is
If a K3 has been upgraded to the latest synthesizer - the KSYN3A - what's the
difference between it and the K3S?
Thanks,
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
28 matches
Mail list logo