Re: [Elecraft] Err TXG message

2020-07-02 Thread Victor Rosenthal 4X6GP
Igor, Try this: attach the dummy load and then tune the ATU into it. Then switch the ATU to BYPASS for the calibration. I am not sure why this helps, but it is worth a try. This is only for the non-S version K3, in which the ATU is not really bypassed. 73, Victor, 4X6GP Rehovot, Israel Former

Re: [Elecraft] Err TXG message

2020-07-01 Thread Don Wilhelm
Igor, Try doing the TX Gain Calibration manually (described in the manual). It is a bit tedious because it must be done on a band by band basis. An email to supp...@elecraft.com may get quicker attention than the form on the webpage. 73, Don W3FPR On 7/1/2020 4:48 PM, Igor Sokolov wrote: My

[Elecraft] Err TXG message

2020-07-01 Thread Igor Sokolov
My K3 S/N 1651 has developed a problem showing ERR TXG message from time to time on different bands and 2.5:1 SWR on 28 MHz even into dummy load. In fact I think these are two separate unrelated issues, but I might be wrong. TX gain calibration fails for 5 W (does not go above 4.5W) and works

[Elecraft] ERR TXG message

2008-05-05 Thread John Unger
I just installed the KPA module and attempted to do the High Power Gain Calibration procedure at 50 Watts. But all that happens is that I get 0 Watts indicated and a "ERR TXG" message. Any idea what is going on? Manual says to refer to a mysterious "Service Manual". Everything works FB up to 1

Fwd: [Elecraft] ERR TXG Message es tnx

2008-01-01 Thread Rajiv Dewan, N2RD
me for ALL BANDS at 50W. Let me know how it goes. 73 Greg AB7R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of H. Cary III Sent: Tuesday, January 01, 2008 2:56 PM To: elecraft@mailman.qth.net Cc: Richard AD7FZ Subject: [Elecraft] ERR TXG Message es tnx The

RE: [Elecraft] ERR TXG Message es tnx

2008-01-01 Thread Greg
. 73 Greg AB7R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of H. Cary III Sent: Tuesday, January 01, 2008 2:56 PM To: elecraft@mailman.qth.net Cc: Richard AD7FZ Subject: [Elecraft] ERR TXG Message es tnx The reference oscillator is now aligned with WWV - t

[Elecraft] ERR TXG Message es tnx

2008-01-01 Thread H. Cary III
The reference oscillator is now aligned with WWV - thanks to N0SS, W3FPR, DJ7MGQ, and AD7FZ for responding so quickly - Tom talked me through it thankfully. I just did the Transmitter Gain calibration and get an error message - ERR TXG - on all bands 160-6. So after passing all the tests/check