The price as I was just informed when I ordered via phone was $699
assembledI don't remember the un-assembled price but I think it was in
the low $600s. A bit steep for a tuner...but I'm betting it'll be worth it!!
73...de...Fred N9TA
_
16:00:43 -0400
> Subject: [Elecraft] For those at Dayton (KAT500)
>
> The price as I was just informed when I ordered via phone was $699
> assembledI don't remember the un-assembled price but I think it was in
> the low $600s. A bit steep for a tuner...but I'm betting it
The AT-1000ProII is $539 at HROpretty close and I bet the KAT500 will be
very comparable.
My order was #3 btw...
73,
Rick W3BI
-Original Message-
From: Rob May
Sent: Friday, May 18, 2012 4:17 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] For those at Dayton (KAT500
ion all Elecraft.
> Rob
> NV5E
>
>
>> From: n9t...@comcast.net
>> To: elecraft@mailman.qth.net
>> Date: Fri, 18 May 2012 16:00:43 -0400
>> Subject: [Elecraft] For those at Dayton (KAT500)
>>
>> The price as I was j
I've never owned a MFJ tuner capable of handling its "rated" power for
anything over a 1.5 SWR (and then you get into arguments about PEP vs CW vs
Continuous Carrier). They all burn out with even a slight mismatch. Since
I'm not trying to tune a dummy load, I'll go with something that can handle
The LDG AT-1000ProII is on a "Dayton" sale at Gigaparts for $459 with free
shipping through Monday, the 21st. (Must be ordered on-line) I just posted this
since there were $539 prices being mentioned on the reflector.
The KAT500 at $699 is quite a bit higher. Also, shipping to the East Cost via
Below...
On Sat, 19 May 2012 10:06:46 -0700 (PDT), Dave Agsten wrote:
>The LDG AT-1000ProII is on a "Dayton" sale at Gigaparts for $459 with free
>shipping through Monday, the 21st. (Must be ordered on-line) I just posted
>this since there were $539 prices being mentioned on the reflector.
>
nt: Saturday, May 19, 2012 11:41 AM
To: Dave Agsten
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] For those at Dayton (KAT500)
Below...
On Sat, 19 May 2012 10:06:46 -0700 (PDT), Dave Agsten
wrote:
>The LDG AT-1000ProII is on a "Dayton" sale at Gigaparts for $459 with free
I would expect that this would depend not only on the SWR, but on the nature of
the
impedance it sees. Unless someone from Elecraft told you this, I wouldn't risk
running
1500 watts at 3:1 SWR (if Elecraft DID tell you this, then I'm ordering one)!
On 5/19/2012 11:41 AM, N5GE wrote:
> I will
>
Oops, wrong again! I see that they make the claim that it will handle 1200-1500
watts on
the website. But I suspect you have to be very careful!
On 5/19/2012 1:32 PM, Vic K2VCO wrote:
> I would expect that this would depend not only on the SWR, but on the nature
> of the
> impedance it sees. U
You bet, Vic. Just read the reviews of antenna tuners in QST, with
careful attention to the amount of power absorbed in the tuner at some
load impedance/reactance combinations, and imagine 600 watts being
dissipated inside a 500-watt tuner.
73, Pete N4ZR
The World Contest Station Database, upd
I plan to order my KAT500 as soon as I find new employment. It will
replace the old MFJ-962D I'm using currently.
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team
On 5/19/2012 4:53 PM, Pete Smith N4ZR wrote:
> You bet, Vic. Just read the r
On 5/19/2012 4:53 PM, Pete Smith N4ZR wrote:
> Just read the reviews of antenna tuners in QST, with
> careful attention to the amount of power absorbed in the tuner at
> some load impedance/reactance combinations, and imagine 600 watts
> being dissipated inside a 500-watt tuner.
Understand that
On 5/18/2012 1:00 PM, Fred Bennett N9TA wrote:
> The price as I was just informed when I ordered via phone was $699
> assembledI don't remember the un-assembled price but I think it was in
> the low $600s. A bit steep for a tuner...but I'm betting it'll be worth it!!
You've GOT to be kidding.
*Jim,
In VK you will pay that for a pretty dumb LDG auto-tuner with a single
antenna connection and more for a manual Palstar.
Given the almost equal exchange rate the KAT-500 not only represents value
for money (not a phrase I would use in a sentence with MFJ in it) it offers
great versatility a
> The LDG AT-1000ProII is on a "Dayton" sale at Gigaparts for $459 with free
> shipping through Monday, the 21st. (Must be ordered on-line) I just posted
> this since there were $539 prices being mentioned on the reflector.
I briefly owned an AT-1000. I hated it, and sold it at a loss. LDG was
@mailman.qth.net
Subject: Re: [Elecraft] For those at Dayton (KAT500)
I agree the price is a bit higher than I would have liked to have seen.
I am sure it will work far better than the MFJ and I don't think either will
handle the full output on 6m which the KAT500 will do or so I was tol
17 matches
Mail list logo