I am using Rocky with my KX3 I/Q output and it works VERY well. I
should also point out that the latest version 3.32 will decode CW and
PSK31 signals !!! I had to use a laptop with a stereo input USB sound
card ($15 from Amazon) and it gives me 96Khz of bandwidth. The reason
for the laptop
Guys,
Before trashing this, one actually needs to use it as I have for years.
I've used it with the ROCKY (free) panadapter program and SKIMMER ($75)
cw decode program. You do need an SDR and available sound card to use them.
ROCKY is a bare bones spectrum display. It can be sized and
That would be nice
You could run two P3s
From: Doug Ellmore d...@ellmore.net
To: elecraft@mailman.qth.net
Sent: Wednesday, January 28, 2015 1:39 PM
Subject: [Elecraft] IF out of 2nd Receiver in K3?
Is there a way to get the IF out of the optional 2nd receiver of a K3?
In addition
See PVRC (Potomac Valley Radio Club) Newsletter June 2012.
Regards,
Mike VP8NO
On 28/01/2015 18:20, Harry Yingst via Elecraft wrote:
That would be nice
You could run two P3s
From: Doug Ellmore d...@ellmore.net
To: elecraft@mailman.qth.net
Sent: Wednesday, January 28, 2015 1:39
There is no official Elecraft modification to access the sub-receiver IF
output, but they do have some information on the web site about others
have done it:
http://www.elecraft.com/K3/K3FAQ.htm#sub%20rx%20if
Alan N1AL
On 01/28/2015 10:39 AM, Doug Ellmore wrote:
Is there a way to get the
As best I remember, though, the P3 talks only to the main receiver ...
right? I believe that anyone wanting to display the sub-receiver would
have to use a different panadapter scheme if they want handshaking
capability such as frequency information, point/click QSY, etc.
The N2QT
Right, the P3 would work only in tracking mode (no fixed-tune mode) and
the sub receiver frequency and receiver bandwidth would not display on
the P3. Also, click-to-QSY would not work and the reference level would
not be correct. But you can still change the span, offset the center
Hi
That assumes one is using a p3. A software panadapter would work fine except
that there would no way to get the if shift from the sub since that command
doesn't exist. It could still be done but it would be a bit of a hack.
Tom
va2fsq.com
On Jan 28, 2015 8:20 PM, Alan n...@sonic.net wrote:
Harry,
While its a nice idea there are a couple of commands missing in the api to
allow this to be done properly. If all you are interested is seeing the
spectrum and doing qsys it probably is possible. But to do the job
semi-correctly you would need some customized code to do so.
Tom
Thank you
I already have the Clifton labs Buffer amp and a softrock lite that I was got a
while ago.
It would be interesting if a Second P3 could be hooked up,I suspect it would
have to be coded for the P3 to know what VFO it is looking at.
I'll have to look into if someone already has written
Doug,
Its not difficult if you do not mind soldering a disc ceramic cap to
the subreceiver board and running some RG-174. I outlined how I did
that on my webpage:
http://www.kl7uw.com/LINRAD.htm
Scroll down the page until you come to the heading:
Connecting K3 Sub-Receiver IF to LP-Pan:
Is there a way to get the IF out of the optional 2nd receiver of a K3?
In addition to looking at two different bands in HF, I am thinking it would
be great to be able to look at both 6m and 2m for field day with one K3.
Doug NA1DX
na...@arrl.net
www.ellmore.net/na1dx
12 matches
Mail list logo