Brian,
thanks for info.
I would like to kindly ask to send the brochure off-list to my email please.
Thank you very much.
Petr
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
G+:http://goo.gl/w3u2s9
G+: http://goo.gl/gP99xq
--
Sent from: http://elecraft.365791.n2.
: Friday, September 21, 2018 10:45 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 : Rack Mount Option?
Hi
I looked at this for a while. With many radios and often swapping antenna
cables and panadapters it was a nightmare just sitting on my table. Looking
on Kijiji, I saw lots of rack
, September 21, 2018 10:04 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 : Rack Mount Option?
I use fixed rack shelves that have an inside dimension of 17.5". At
several Denver-area swap meets I have displayed the Elecraft banner with
the K-Line in a short rack cabinet. The K3(S) + P3 (o
I use fixed rack shelves that have an inside dimension of 17.5". At
several Denver-area swap meets I have displayed the Elecraft banner with
the K-Line in a short rack cabinet. The K3(S) + P3 (on the right side)
fit on one shelf with the feet and the handle in place. No need to
remove anything,
I shared this a little while back. My solution isn't as slick as rack
mounting, but has a smaller footprint (about 14" x 14" or so) and great
ventilation. :-)
http://udel.edu/~mm/ham/elecraft/rack/
73,
Mike ab3ap
On Fri, Sep 21, 2018 at 9:13 PM hawley, charles j jr
wrote:
> My rack mount
ike a common panel is not required anyway making it a moot point.
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
> Original message From: Nr4c Date:
> 9/21/18 18:57 (GMT-06:00) To: Bob McGraw K4TAX Cc:
> elecraft@mailman.qth.net Subject: Re: [El
@mailman.qth.net Subject: Re: [Elecraft] K3 : Rack Mount Option?
Fun part is mounting the P3 to the K3. Both side panels screw on from side. No
way to share a common panel.
Sent from my iPhone
...nr4c. bill
> On Sep 21, 2018, at 7:49 PM, Bob McGraw K4TAX wrote:
>
> I believe if on
ge From: "Joe Subich, W4TV"
Date: 9/21/18 18:56 (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re:
[Elecraft] K3 : Rack Mount Option?
On 2018-09-21 6:17 PM, Clay Autery wrote:
> Thanks... Looks like the solution is to get a spare K3s right side
> panel and sib-
iginal message ----From: Bob McGraw K4TAX
>> Date: 9/21/18 16:45 (GMT-06:00) To:
>> elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 : Rack Mount Option?
>> Based on published numbers, the P3 is 6.1" wide, the K3S is 10.7"
>> wide. As I recall a
On 2018-09-21 6:17 PM, Clay Autery wrote:
Thanks... Looks like the solution is to get a spare K3s right side
panel and sib-machine it in a way that it can serve as a common
panel for both components
Not likely since the right panel of the K3/K3S and the left panel of
the P3 are both m
0) To: elecraft@mailman.qth.net Subject: Re:
[Elecraft] K3 : Rack Mount Option?
Based on published numbers, the P3 is 6.1" wide, the K3S is 10.7"
wide. As I recall a 19" rack shelf is 16.75". If all is correct, a
real tight fit, I'd say.
73
Bob, K4TAX
On 9/21/201
laxy smartphone
Original message From: Bob Nielsen - N7XY
Date: 9/21/18 16:46 (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re:
[Elecraft] K3 : Rack Mount Option?
It's about 16.75 inches wide if you remove the handle and feet from the
sides of the K3
On 9/21/18 2:36 PM, Cl
/18 16:45 (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re:
[Elecraft] K3 : Rack Mount Option?
Based on published numbers, the P3 is 6.1" wide, the K3S is 10.7"
wide. As I recall a 19" rack shelf is 16.75". If all is correct, a
real tight fit, I'd say.
73
Bo
riginal message From: Jim Rhodes Date: 9/21/18 11:34
(GMT-06:00) To: "Petr, OK1RP/M0SIS" Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 : Rack Mount Option?
Novexcomm.com is all that I have seen. Looks like good stuff, but I haven't
ordered yet.
Jim Rhodes
K0X
width too wide for a single 19" 3U
rack unit?
Sent from my Verizon, Samsung Galaxy smartphone
Original message From: Jim Rhodes Date: 9/21/18 11:34
(GMT-06:00) To: "Petr, OK1RP/M0SIS" Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 : Rack Mount Option?
.qth.net Subject: Re: [Elecraft] K3 : Rack Mount Option?
Novexcomm.com is all that I have seen. Looks like good stuff, but I haven't
ordered yet.
Jim Rhodes
K0XU
On Fri, Sep 21, 2018, 10:02 Petr, OK1RP/M0SIS wrote:
> Hi,
>
> anything changed from 2007 already? :)
>
> I am look
One of Elecraft's vendors that does the heatsinks, SNS Engineering,
makes a complete line of rack panels that will do exactly as you want.
Matching black color, handles, strong and well made.
Call then at (831) 345-4590. I would attach a brochure, but this
reflector doesn't pass them along.
Novexcomm.com is all that I have seen. Looks like good stuff, but I haven't
ordered yet.
Jim Rhodes
K0XU
On Fri, Sep 21, 2018, 10:02 Petr, OK1RP/M0SIS wrote:
> Hi,
>
> anything changed from 2007 already? :)
>
> I am looking for 19' rack mount option for KPA500, KAT500, W2 as same as
> PSU
> an
I have my KAT500 and KPA500 in a rack. I do it with shelves that mount in the
rack. Does not give it a military or commercial appearance but is as effective
as having a rack mount option. I actually like it better because I can slide a
unit partly out or rotate it for access if needed. I do
Hi,
anything changed from 2007 already? :)
I am looking for 19' rack mount option for KPA500, KAT500, W2 as same as PSU
and antennas multi-switch etc...
Thanks for info.
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
G+:http://goo.gl/w3u2s9
G+: http://goo.gl/g
Had asked prior to Dayton, but really did not get a yea or a nay to the
possiblity to factory rack mount kits for the K3 and options? I know its a
field ready transceiver, but sometimes that also helps in making a shipping
container for long trips or portable opperation stations.
Thoughts?
21 matches
Mail list logo