Joe Subich, W4TV-3 wrote:
>
>
> FSK D and AFSK A receive in LSB while PSK D and DATA A receive in
> USB for compatibility with the (backward) convention of most non-
> RTTY software writers (PSK32, MFSK, etc.).
>
... which makes it difficult for any program to know what to do since at the
m
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rich (KE0X)
Sent: Friday, June 27, 2008 4:49 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware 2.10,1.81 problems Update
As Julian suggested the problem is in MixW. It has been 40
years since I had the RTTY training course in the
iginal Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Rich (KE0X)
> Sent: Friday, June 27, 2008 4:49 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Firmware 2.10,1.81 problems Update
>
>
>
> As Julian suggested the prob
As Julian suggested the problem is in MixW. It has been 40 years since I had
the RTTY training course in the NAVY, but, it has to do with the convoluted
history of RTTY. Although SSB is on the LSB on the HF bands below 30 Meters
and USB on those bands above 30 meters (Many reasons given for this
ailto:[EMAIL PROTECTED] On Behalf Of Andrew Forrest
> Sent: Friday, June 27, 2008 6:31 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 Firmware 2.10,1.81 problems
>
>
> Dear All.
>
> operating a K3 with latest beta firmware, using PSK on data
> modes wit
No, the TS-2000 option doesn't work either. I have a feeling that the issue
with the K2 that I referred to affected only certain bands, where the K2
switched the sideband used by default. It only became apparent to me because
I used a macro to bring a selected signal to the center of the passband
A.K.Forrest wrote:
>
> Dear All,
>
> did some more on the problem. With MixW using modes RTTY or RTTYR when
> controlled by a K3 in data mode
> the frequency scale moves to the right but the signal moves to the left.
> They should obviously be in step i.e the
> display should show a signal at
Dear All,
did some more on the problem. With MixW using modes RTTY or RTTYR when
controlled by a K3 in data mode
the frequency scale moves to the right but the signal moves to the left.
They should obviously be in step i.e the
display should show a signal at a constant frequency as the radio is
A.K.Forrest wrote:
>
> Dear All.
>
> operating a K3 with latest beta firmware, using PSK on data modes with
> MixW. The frequency display on MixW now shows incorrect frequencies for
> the signals received in data mode. On SSB frequencies displayed appear
> correct. On data they appear about
Dear All.
operating a K3 with latest beta firmware, using PSK on data modes with
MixW. The frequency display on MixW now shows incorrect frequencies for
the signals received in data mode. On SSB frequencies displayed appear
correct. On data they appear about 3KHz low and on data reverse about
10 matches
Mail list logo
