gt; -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of O. Johns
> Sent: Tuesday, February 02, 2010 10:01 AM
> To: David Lankshear
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 mods and methods: smt
Dave,
Their video showing surface-mount soldering techniques is double-recorded in
the audio channel. Pretty frustrating. Do you know someone there you can tell?
--Oliver
W6ODJ
On 2 Feb 2010, at 3:42 AM, David Lankshear wrote:
> Simple two pole devices don't need much "engineering" to remov
Simple two pole devices don't need much "engineering" to remove, but I would
caution against the "cut in half with sharp cutters" method as it can lead to
damaged pads.
I can't be bothered creating special tools for two pole devices, just a quick
flip with a pair of soldering irons, then use a
We've got a tech who is amazing with a soldering iron. He has two very
nice soldering irons on the bench next to him at all times. All this
guy does is work magic with a soldering iron all day long...
His two irons are one with a bit of a cup in the end of the tip (for
holding solder) and the ot
David Windisch wrote:
>
>It's a process, it's easier than you think, and there is plenty of room
>for creativity. I don't pretend to know it all; this works for me.
>
>BASICS:
>
>Light up the work area.
>
>Get comfortable seating.
>
>Buy a pull-down magnifier. Don't skimp here. I use OPTI-VISOR
Bob,
I have been successful using that technique, but when there is any
difficulty with the solder re-attaching, I slide a THIN knife blade
under the first side when the solder melts. The blade must be thin (and
must have a sharp edge) so the amount of lift is very small - a thick
blade could
I find that the key to removing SMT components like those involved in the
mods described is best done with solder-wick and quick movement of one
small-tipped iron to both ends of the component. I removed most of the
solder with the solder-wick and then alternate heating of both ends of the
componen
It's a process, it's easier than you think, and there is plenty of room for
creativity. I don't pretend to know it all; this works for me.
BASICS:
Light up the work area.
Get comfortable seating.
Buy a pull-down magnifier. Don't skimp here. I use OPTI-VISOR, 3X lenses.
Buy 2 of the physical
8 matches
Mail list logo